I. Introduction
Mushroom had previously bought a Baker Bass kitchen waste disposer, which took a while, but the family did not cook much, and there was no dishwasher, and it always felt that there was no large flow, and the hot water with detergent was not enough to rinse, and then it was taken off and idle.
Later, the family often cooked, and every day they would face all kinds of kitchen waste, what kinds of melon and fruit peels, residues, leftovers, as well as some bones, scraps, are very annoying, and each has its own hate!
The peel of the melon fruit, the stem and leaf of the vegetable, this amount is relatively large, always wet, daily cleaning will always make the ground is water, and the plastic bag of the garbage can should be intact, otherwise it will leak! Moreover, the garbage can should be replaced frequently, otherwise it will be moldy and deteriorated. Leftovers are also very uncomfortable, soup soup water is very much, pour the garbage can, but also to ensure that the garbage bag is intact, and the load-bearing capacity is enough, pour the toilet bar, the distance is too far, the drainage is drained, and some solid, the toilet is not easy to flush, it is very uncomfortable. Similarly, the trash can that pours leftovers should also be thrown away frequently, otherwise the smell of spoilage can spit out for you overnight.
Just the dishwasher at home is also used normally, not to say once a day, but once every two days, I want to install the previously idle kitchen waste disposer and completely solve the problem of kitchen waste.
I thought it was a very simple thing, but when I pretended, I found that there were many things!
Second, encounter problems, solve problems, personal installation of food waste processors once the experience of installation process
▼ The kitchen waste disposer is the 680 of Baker Bass, a white silent version of the mushroom before it.
▼ The appearance of this kitchen waste disposer is still very beautiful, white, and very quiet.
Problem 1: The connection to the dishwasher requires a hole
▼ This kitchen waste disposer has a special interface reserved for the dishwasher, but this interface is sealed by default, and it needs to use a special hole opener to open the hole before it can be used normally.
▼ So Mushroom placed an order and bought a hole breaker with similar specifications, and used the electric screwdriver in his hand to cut the hole.
▼ The overall opening process is OK, although the torque of the electric screwdriver is smaller, the speed is slower, but it is still very simple to open the plastic with metal.
Problem two: the problem of water, need to replace, buy special
▼ Originally thought that the kitchen waste processor's own accessories are enough to use, and later found that the original accessories can only be installed in a basin of water holes in the water, the rest of the parts are to buy a new one.
▼ The default sewage of the water basin cannot be used together, and the mushroom is originally a quick-release design, without a thread, and cannot be fixed to the kitchen waste disposer.
▼So mushrooms started a submarine-specific launch, which looked very advanced.
▼This can be directly fixed to the kitchen waste disposer.
▼ This kitchen waste disposer from Baker Bass, the outlet part is assisted by metal parts, which can be directly connected to the water.
▼But remember to install the rubber ring well, anti-leakage all rely on this.
▼The effect after packing it looks OK.
▼ By the way, the rubber ring will be slightly smaller than the drain, remember to get the rubber ring to the bottom, try to minimize the rubber ring for the outlet of the obstruction.
▼ After installing the effect, and conveniently install the drain pipe fittings of the water purifier.
▼Then connect the water, roughly this feeling.
▼ In fact, this sewage has two installation methods, the above is the first, the other is with the kitchen waste disposer original black drainage accessories, similar to this, mainly depends on the space under your kitchen sink.
▼ The submarine is a water belt overflow, and the mushroom should replace the original one.
▼The drain pipe of the water purifier of the mushroom was inserted directly into the overflow pipe and was installed destructively.
▼ Install the spill pipe of the submarine, and the bottom is a rubber sleeve design.
▼ Fix the kitchen waste disposer first, and then connect the water part.
▼There is also a rubber pad waterproof between the kitchen waste disposer and the hole in the middle of the basin, and the thick one, remember to center!
▼ Then install the sewing part according to the effect of the previous comparison.
▼ In the case of normal installation, the drain pipe of the overflow pipe and the water purifier will interfere with the drain pipe of the dishwasher, and the angle is slightly turned here and staggered.
▼ The drain pipe at the other end is inserted directly into the outlet pipe, and inserted to the end, sure!
Problem three: socket problem, the number of sockets is not enough
▼ There is only one socket under the mushroom family pool, and a dishwasher and a water purifier have been connected before, and there is no third jack.
▼ Mushrooms have added a row here to expand two jacks. In addition, this cutting of the mushroom is specially treated, fixing the wire and the insert itself together and making the insert suspended. Where there is a possibility of water, it is safer to insert and hang in the air.
▼Finally, the water purifier is pushed back and the overall installation is completed. The water pipe of the dishwasher is relatively long, and here the plate is at the bottom. By the way, the drain pipe of the dishwasher needs to be sealed, so there is no need to deliberately raise the water pipe.
Problem four: under the stage basin, water basin support problem
▼ The kitchen water basin of the mushroom family is an undercounter basin, and the kitchen waste disposer vibrates greatly when it is running, and the mushroom chooses to support the water basin here, and chooses this support rod.
▼ But later I felt that this kind of support rod was not very good, and the support was unstable. Later, I started with the support seat, this kind of square, metal support seat.
▼ This support holder directly supports the bottom of the kitchen waste disposer and directly solves the problem. And the support seat has a thick rubber material on it, which can absorb vibrations. On the right is the height adjustment of the thread, which is very delicate.
Problem five: The water is not smooth and easy to regurgitate
▼ The design principle of this magnetic anti-odor-proof component of the submarine is good, and there is no problem with normal use. But in the case of kitchen waste disposal, it is a bit difficult to use. In the first time of kitchen waste drainage, this flap can not be quickly lifted, it is easy to regurgitate, sewage from the overflow port regurgitated into the pool, very embarrassing. Moreover, there is more oil in the sewage, which is easy to make this mechanism stick, and the pressure will be greater at the first time of drainage.
▼ Later, mushrooms bought another submarine launch, also with magnetic anti-odor components, but the location is different, underneath.
▼The accessories are probably like this, and it is a little different from the previous one.
▼This component requires the original drainage component of the kitchen waste disposer.
▼ By the way, you must not forget to use rubber pads, you must not forget to use rubber pads, and you must not forget to use rubber pads.
▼The previous drainage component is like this.
▼The drainage component after the replacement is like this.
▼ Later, the mushroom found that it did not work, there would still be a reflux situation, and finally directly once and for all, directly removed the anti-odor component in the middle, and directly connected to the water.
▼ The overall effect after getting it all done, ok.
3. Summary
By the way, the rubber sleeve at the end of the drain pipe of the Midea dishwasher is smaller in diameter and does not fit into the inlet pipe part of the dishwasher. The mushroom here uses an expanded hose bridge, which can be seen in many figures, which is also a problem.
In addition, this is the case of personal installation of mushrooms, if the manufacturer package is installed, there should be no problems. The installer will definitely bring a lot of accessories and will directly replace and replace you. However, there will definitely be some additional costs.
Remaining resolvable issues:
1, the sewer pipe is too long, the kitchen waste processor needs to turn an angle slightly, in order to install the sewer pipe normally.
2, the sewer pipe is an elongated bellows, there will be gaps between each ripple, and there will always be some particles that are easy to settle.
Remaining unsolvable issues:
1, the dishwasher drain pipe is horizontally fed, when using the kitchen waste disposer daily, there will be some residue thrown into the dishwasher drain pipe.
Thank you!
The End