High-speed winding machine winding speed is generally very fast, in debugging or later use, there may be a problem of jitter, many inexperienced friends, may not be very clear, then high-speed automatic brushless winding machine jitter is what is going on?
1. Rack configuration, for four-station or six-station high-speed winding machine, if the frame is very light, it is easy to produce vibration when running, which will affect the winding effect of the stator. The overall frame configuration is very important, especially the material and stability performance, the current base is often composed of sheet metal, chassis square pipe welding and casting, stainless steel work surface, aluminum alloy shelf and so on.
2. Servo drive motor and spare parts configuration, motor configuration is very important, if the quality of the motor itself is not good, it may also produce jitter when running at high speed, which is generally not easy to solve, try to use high-quality or imported servo motors, relatively stable. There are also spare parts, such as guide rails, lead screws, cylinders, etc., all try to use sophisticated products.
3. The machine is running too fast, unstable, different stator products can achieve the speed is not the same, generally have a corresponding range, if beyond the scope of operation, not only easy to hurt the line, break the line, and is likely to produce jitter.
4. Ground factors, in the installation, if the ground is not flat, the height difference is easy to cause imbalance, the machine is easy to shake, in the installation, must adjust the height, to ensure that the machine balance, stable operation.
5. Other vibration sources, generally many motor manufacturers, not only winding machines, and other different equipment, some large equipment violent vibration is relatively large, if too close, it is easy to cause the winding machine jitter, unstable operation, should try to stay away from the vibration source of the large work site.
What is the high-speed automatic brushless winding machine jitter? I believe that after reading the above content, you will probably understand that in the actual production, we must pay attention to these basic details, operate correctly according to the instructions, and ensure the smooth operation of the machine.