Dotted lines are variable, but solid lines are not
I believe that friends are taking the exam for a while
Just put this knowledge point
Deeply imprinted in the mind
But encounter the following kind of dotted line
But don't change lanes
"Isn't this a dotted solid line?"
"Why can't the dotted side change lanes?"
The diamond-shaped blocky dashed line in the figure is called
Longitudinal reduction line
Easy to mix with the common dashed solid reticles
Next, I will explain the relevant knowledge to you in detail
What is a deceleration sign?
The deceleration line is used to remind the driver of the vehicle to slow down in front of the road, usually set in front of the curve, slope, tunnel opening, long downhill section and other sections of the road that need to be decelerated or in the lane of motor vehicles, divided into the lateral deceleration marking of the lane and the longitudinal deceleration of the roadway.
Dashed solid reticles
Longitudinal deceleration reticles
In fact, how to distinguish between a dotted solid line and
The longitudinal reduction line is simple
The dashed lines of the dashed solid reticles are rectangular
It is different from the diamond shape of the longitudinal deceleration line
And there are also differences in the location where the two appear
Everyone should pay attention to discernment
Whether the longitudinal reduction line can change lanes
Does the longitudinal deceleration line have to change lanes? Of course not! Drivers, keep in mind that whether a vehicle can change lanes depends on the lane dividing line. When it is a solid line, it cannot change lanes, and the dashed line can change lanes.
Dotted and dotted solid lines
01
Yellow dotted line
The yellow dotted line is used to distinguish lanes in different directions, usually set on a narrower road surface. When the yellow dotted line, the vehicle can overtake or make a U-turn across the line, but it must be safe.
02
Yellow dashed solid line
When the middle of the road is a yellow dotted solid line, the dotted side of the line can turn around or turn under the premise that there is no car in the opposite lane or ensure safety; while the vehicle on the solid line side is not allowed to press the line or cross.
03
White dotted solid line
When the middle of the road is a white dotted line, the vehicle can change lanes from the lane on the side of the dotted line to the lane on the side of the solid line, but cannot enter the lane on the side of the dotted line from the lane on the side of the solid line.
Finally, I would like to remind all drivers
Whether it's the yellow line or the white line
As long as it is a solid line, it is a wall
Can't be pressed, can't be crossed