Xiaomi officially announced the surging P1 chip today, and since then, Xiaomi has brought surging S1, C1, P1 three chips.
Among all domestic manufacturers, Xiaomi has been in a leading position in the field of charging, with a maximum of 120w wired fast charging, 100w wireless fast charging, etc., bringing consumers a good charging experience, only half an hour, you can fully charge the phone.
The surging P1 brought today is also a chip that improves the charging experience, realizing a single cell 120w fast charging.
The surging P1, breaking through the industry's technical barriers, has become one of the highest efficiency 4:1 charging chips, while multi-stop free voltage mode, bright screen charging efficiency is higher, charging protocol compatibility is wider, and has stronger reverse charging capabilities.
The surging P1 itself undertakes a lot of conversion work: the traditional charge pump only needs two operating modes (variable pressure, straight-through), while the surging P1 needs to support 1:1, 2:1 and 4:1 conversion modes, and all modes need to support double guide, which means that a total of 15 permutation combinations of mode switching control is 7 times that of the traditional charge pump. Forward 1:1 mode makes the bright screen charging efficiency higher, forward 2:1 mode can be compatible with more chargers, forward 4:1 can support 120W surging seconds charge, reverse 1:2/1:4 mode can support high power reverse charging.
Nowadays, domestic manufacturers pay more and more attention to scientific and technological research and development, and I believe that in the future, the domestic technology field will lead the world.