Recently, MediaTek officially released a new generation of flagship mobile platform Tianji 9000, with unprecedented powerful performance and rich functions. OPPO Find X series new products, vivo new flagship, Redmi K50 series have been confirmed to be installed.
For the new platform, everyone is most concerned about the performance of nature, especially how is it compared with qualcomm Snapdragon 8 Gen1?
We fast technology also got a Tianji 9000 engineering machine, ran a bit of Antutu, GeekBench, GFXBench, PCMark four benchmarks, let's take a look at it in advance!
Of course, the use of engineering machines here does not represent the performance of the actual product, and according to the convention, with the continuous optimization of the platform, the performance will continue to improve.
An Tutu broke through 1 million points, compared to the Snapdragon 8 Gen1 less than 10,000 or 20,000 points, the difference is only between millimeters.
Compared with each sub-item, the GPU part is the only one that lags behind, with a gap of 12%, while the CPU, memory, and UX are about 9%, 7%, and 4% ahead, respectively.
After running the minutes, the temperature increased from 26 °C to 37 °C, and finally it was basically similar to the Snapdragon 8 Gen1 engineering machine that ran before.
GeekBench 5 single-core 1272 points, multi-core 4243 points, compared to the Snapdragon 8 Gen1, the former is not much difference only about 4%, the latter is more than 10%.
GFXBench 5 Manhattan, Manhattan 3.1, Aztec Ruins Vulkan (High), Aztec Ruins OpenGL (High) were 235FPS, 159FPS, 43FPS, 42FPS, compared to the Snapdragon 8 Gen1, respectively, about 12%, 11%, 12%, 2%, and The results were similar to those of Antutu.
PCMark Work 3.0 scored 17660, about 2% ahead of the Snapdragon 8 Gen1, not much of a gap.
Overall, MediaTek Tianji 9000 has a leading edge over Qualcomm Snapdragon 8 Gen1 CPU performance, and there is still a certain gap in the GPU, and the overall basic is basically in the same grade, and the actual experience will not be significantly different.
Since the test is an engineering machine, this time there is no focus on the temperature and heat, and the follow-up depends on the strength of each manufacturer!