The annual Double 12 carnival is coming, and many hardware manufacturers have taken the lead in opening welfare activities, such as well-known DIY chassis and power supply brands have brought many preferential products, and many of their chassis and power supplies have participated.
Black Diamond 1000W power supply
Black Diamond 1000W power supply is the main power supply product of Xianma during the double 12 period, and it is also a new product that has just been released, and has been certified by 80Plus Gold for rated power 1000W power supply. In terms of shape design, it is exquisitely designed, with only a short body of 14cm, equipped with full module cables. It also provides 1 24pin main power supply cable (length 610mm), 2 4+4pin CPU power supply cables (650mm long), 3 6+2pin PCI-E power supply cables (length 675+85mm), two SATA power supply cables (length 450+120+120+120mm), and two D-type 4pin power supply cables (length 450+120+120mm).
Functionally support wide-width full voltage, energy-saving temperature control, fan one-key start-stop, full-bridge LLC technology, equipped with FDB fluid dynamic bearing fan, can well meet the configuration needs of high-end platforms, and there are sufficient interfaces. If you have a need for power charging power, then this Black Diamond 1000W power supply must be for you.
Gold medal 550W/750W power supply
Two more power supply with slightly lower power are recommended, and after the black diamond, it must be the first horse gold medal 550W/750W power supply. Both products are 80PLUS Gold certified, and at 220V, the actual conversion efficiency is close to the Platinum standard. The full module cable design is beautiful and convenient and easy to route. The internal LLC+DC-DC stabilization circuit is adopted to improve efficiency and stabilize power supply, and at the same time, an integrated closed PFC inductor is adopted to enhance power stability. Xianma provides three years of replacement services for these two power supplies, only replaced and not repaired, and the after-sales are worry-free.
Black Hole X Chassis
Then recommend a first-horse chassis product - Black Hole X, which is a full-tower silent chassis, with dimensions of 485 (L)*232(w)*505(H)mm, net weight 10.5kg, the highest support for E-ATX specifications of the motherboard, compatible with ATX, M-ATX and ITX motherboards. Since it is a full-tower chassis, it is very scalable, it supports five 2.5-inch hard disk bits and four 3.5-inch hard disk slots, and also supports front 3*12/14cm, rear 1*12/14cm, top 3*12/2*14cm cooling fan positions, and supports graphics cards up to 415mm length.
In addition, it is also optimized in terms of noise control, thanks to the built-in 0.7mm SPCC steel plate and four-sided polymer resin silent cotton, separate unique air duct, the standard four 14cm silent fans, and it can be adjusted by the front fan governor for three speeds, the lower power supply compartment to prevent resonance, etc., there is basically no noise generation when running the computer.