Sitting posture and dead ends Count the driving skills that novices must know

New car run-in

Due to the problem of automobile processing accuracy, new cars should pay attention to running-in. The advantages and disadvantages of automobile running-in will have an important impact on automobile life, safety and economy. The run-in mileage of the car is generally 1000-3000 kilometers, and the imported car is longer. In terms of precautions, it mainly includes avoiding emergency braking, avoiding overload (not exceeding 75%-80% of the rated load), avoiding long-distance running, avoiding high-speed driving (the engine speed should be 2000-4000 rpm), and avoiding starting without hot cars.

Lacquer protection

Timely and correct maintenance can keep the paint surface a good appearance. If you buy an imported car, the first thing to consider is that the wax contains paraffin, resin and Teflon and other materials. Do not wipe with gasoline or kerosene when removing wax, you should use professional wax opening liquid, or go to a professional beauty care shop and ask a technician to help deal with it. As for domestic cars, most of the body is sprayed with electrostatic spraying, and the paint surface is mirror glossy, so there is no need for open wax.

sitting posture

The sitting position tends to be too far ahead. With the right foot lightly put the brake pedal, the angle between the large and small legs should be about 120 degrees or more obtuse angle, and the large and small legs should not be completely straight when pressed.

Corner

During driving, the driver should pay attention to visual blind spots. In addition, as the speed increases, the driver's field of vision also narrows. The main dead spots include vehicles parked on the side of the road, which can create a blind spot for drivers of nearby vehicles heading towards it and pedestrians crossing the road. In addition, 2 meters behind the car is a dead angle of the rearview mirror. Therefore, not seeing a car in the rearview mirror does not mean no car. When changing lanes, the driver should turn on the turn signals. While looking at the rearview mirror, you must also turn your head to observe the situation behind the car.

Security Awareness:

1) Everyone can make mistakes: every driver is a person with personality. Therefore, some people will hit the mobile phone while driving, some people will merge without lights, and some people will drive extremely fast and rarely pay attention to safe speed. For these car owners, in addition to relying on the strict management of the traffic management department, they should also pay attention to the distance between the vehicles when driving themselves.

2, driving should be anti-rear-end: whether it is rear-end, or rear-end, sometimes it seems involuntary. Nevertheless, there are also some common techniques for preventing rear-end collisions: 1. Try to avoid sharp braking when braking to leave sufficient reaction time for the rear car; 2, in case of red lights, try not to brake in front of the big car. Due to the large quality, large vehicles are often untenable, and there is a great threat to the front car.

Manual gear driving skills

1, do not frequently step on the clutch: habitually stepping on the clutch is not only bad for the machine, but also affects the safety of driving. The starting point requires a slow lift clutch, and the clutch should be completely released when the vehicle is driving.

2, do not blindly pursue high gear. Driving does not have to pursue high gears. Each gear has its own function. Remember what the driving school master taught? The first gear starts, the second gear turns around, and the third gear turns.

3. Shift gears. When driving in general urban areas, the engine speed should be kept at about 2000 rpm. In this way, it is possible to give full play to good power and take into account the economic fuel consumption of the driving mode.

4. Clutch. When starting, the clutch pedal is lifted to start quickly pickup; when the clutch appears semi-linkage (at this time the sound of the engine changes), the pedal lifting speed is slightly slower; from the linkage to the process of complete combination, the pedal is slowly picked up at the same time as the clutch pedal is lifted, and the accelerator pedal is gradually stepped down according to the engine resistance, so that the car starts smoothly.

Correct operation when shifting gears. When changing gears during driving, the operating clutch pedal should be quickly stepped down and lifted, and there should be no semi-linkage phenomenon, otherwise, it will accelerate the wear of the clutch. In addition, pay attention to the throttle when operating.