When the constant temperature and humidity test chamber after a long period of use, resulting in equipment shortage alarm, overpressure alarm and overload alarm and other phenomena, for these problems are not caused by equipment failure, are able to be solved by reset and other related manual operations, so the user can not worry too much, this method is simple, fast and important is not to affect the test. However, in the use of the situation that the lack of water can not be solved, so the user should pay special attention to the countermeasures for this problem, the following high-altitude test equipment Xiaobian will be introduced to you.
1, open the personal studio door in the upper right will see that there are so many parts, overheat protectors, temperature sensors, temperature sensors, dry bulb temperatures, all normal order information should also be distributed like that, but some more powerful manufacturers, overheat protectors and temperature sensors composed of a controller, and only TEM. Temperature sensor, temperature sensor, dry bulb temperature in the working room, wet mesh hanging on the temperature sensor in the floating situation, the bottom immediately penetrates into the dry bulb temperature, if there are water droplets, you can check according to the opening and closing door.
2, check the waterway, you must observe whether the water valve is very large, causing too much water, if so, you can immediately close the water valve.
3, check whether the solidification time is set too high to prevent too much power supply, if so, can increase the solidification interval time to reduce the frequency.
4, check whether the test room pavement is level, the skewed viewing angle will also cause the water imbalance of the dry bulb temperature, and then make the water droplets fall, at this time, just move the machine and equipment to the flat application.
5, check the right side of the constant temperature and humidity box water level box is not too high, in order to prevent too much leakage, then the water level box must be adjusted, for this kind of situation, it is proposed to use professional and technical personnel to adjust the water level box, technical engineers to carry out technical professional communication and exchanges, and then carry out steps to prevent the adverse effects of wrong practices.
The above about the constant temperature and humidity test chamber water shortage solution for everyone to share here, constant temperature and humidity test box is aviation, automotive, home appliances, scientific research and other fields of the necessary test equipment, for testing and determining electricians, electronics and other products and materials for high temperature, low temperature, alternating wet heat or constant test of the temperature environment after the change of parameters and performance.
![Taishan team's reinforcement feast: Deng Hanwen, Gao Tianyi, who will become Cui Kangxi's first choice?[fig]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)