分享興趣，傳播快樂，
增長見聞，留下美好！
親愛的您，這裡是LearningYard新學苑。
今天小編為大家帶來文章
“覃學苦練（15）：使用Origin軟體繪制折線圖”
歡迎您的通路。
Share interest,spread happiness,
increase knowledge, leave a beautiful!
Dear, this is LearningYard Academy.
Today, the editor brings you an article "Qin Xue's hard training (15): Use Origin software to draw a broken line chart "
Welcome your visit.
一、思維導圖（Mindmapping）
今天小編為大家帶來軟體Origin軟體的簡單使用及繪制折線圖，将從對Origin軟體的介紹、應用繪圖及一些便捷設定。
Today, Xiaobian brings you the simple use of Origin software and the drawing of broken line charts. It will introduce Origin software, application drawing and some convenient settings.
二、Origin軟體的簡介（Introduction to Origin Software）
Origin軟體是由OriginLab公司開發的科學繪圖和資料分析的軟體，廣泛應用于科學研究、工程和商業領域的資料處理和圖表制作，其具有易用性、資料分析能力、圖表繪制、程式設計功能等特點，Origin為我們的科研繪圖，提供了很大的幫助和便利。
Origin software is a scientific drawing and data analysis software developed by OriginLab. It is widely used in data processing and chart making in scientific research, engineering and commercial fields. It has the characteristics of ease of use, data analysis ability, chart drawing, programming function and so on. Origin provides great help and convenience for our scientific research drawing.
三、Origin繪圖（Origin drawing）
當使用Origin軟體進行繪圖時，不必慌張，根據打開的界面，在相應位置錄入自己的資料。然後根據自己的需求在界面左下角進行所需圖像的繪制或者在上方的菜單欄中，選擇“繪圖”在其菜單欄中選擇适配的圖像進行繪制，然後再輕按兩下坐标軸、所繪制的圖像，細緻的進行所需的美化和調整。使其符合論文所需繪圖要求。界面如下圖所示：
When using Origin software for drawing, there is no need to panic, according to the open interface, input their own data in the corresponding position. Then draw the required image in the lower left corner of the interface according to your own needs, or select "Drawing" in the menu bar above, select the appropriate image in the menu bar to draw, and then double-click the coordinate axis and the drawn image to carefully beautify and adjust the required image. Make it conform to the drawing requirements of the paper. The interface is shown in the following figure:
1、折線圖（Line chart）
在這裡我給大家帶來一個執行個體操作來繪制一個折線圖。首先打開Origin軟體，根據自己的資料，在界面相應位置錄入資料。然後選中錄入的資料，在左下方選擇“點線圖”進行繪制，然後可輕按兩下坐标軸，進入對坐标軸的設定，可添加上方和右方坐标軸，和對刻度的設定。輕按兩下已畫出的圖像，進入對圖像顯示的相關設定，如圖像顯示點數目、符号、線條、寬度、顔色等。最後可将此圖，在“檔案”處，選擇“儲存為模版”,以便後續畫圖，直接在此基礎上修改即可。如下圖所示：
Here I bring you an example operation to draw a line chart. First, open the Origin software, and enter the data in the corresponding position of the interface according to your own data. Then, select the entered data, and select "Dot Plot" at the bottom left to draw, and then double-click the coordinate axis to enter the setting of the coordinate axis, add the upper and right coordinate axes, and set the scale. Double-click the drawn image to enter the relevant settings for image display, such as the number of image display points, symbols, lines, width, color, etc. Finally, you can select "Save as Template" in the "File" for subsequent drawing, and modify it directly on this basis. As shown in the following figure:
四、Origin相關快捷設定（Origin-related shortcut settings）
在Origin軟體中，可點選左側的“項目管理”将其固定在顯示屏中，友善繪圖和資料的檢視。小編使用的版本可在菜單欄“設定”中選擇“選項”在其中，對預設字型進行設定，設定成符合論文要求的繪圖字型，還可以在其中，選擇“頁面”來設定插圖時的頁邊距，使其緊湊，可以幫助我們高效的繪制美觀的圖。
In the Origin software, you can click "Project Management" on the left to fix it in the display screen to facilitate the viewing of drawings and data. The version used by Xiaobian can select "Options" in the menu bar "Settings" to set the default font as a drawing font that meets the requirements of the paper. You can also select "Page" to set the margins of the illustrations to make them compact, which can help us draw beautiful pictures efficiently.
今天的分享就到這裡了。
如果您對文章有獨特的想法，
歡迎給我們留言，
讓我們相約明天。
祝您今天過得開心快樂！
That's all for today's sharing.
If youhave a unique idea about the article,
please leave us a message,
Let us meet tomorrow.
I wish you a happy day today!
翻譯：訊飛星火翻譯
參考資料：B站、百度百科
本文由LearningYard新學苑整理發出，如有侵權請在背景留言溝通！
文字：qin
排版：qin
稽核|Yue