AIX 檢視網卡是否做綁定

可以通過lsattr指令檢視網卡是否做過綁定，以下僅作記錄

[quote]# lsattr -El ent2

adapter_names ent0 EtherChannel Adapters True

alt_addr 0x000000000000 Alternate EtherChannel Address True

auto_recovery yes Enable automatic recovery after failover True

[color=red]backup_adapter ent1 Adapter used when whole channel fails True[/color]

hash_mode default Determines how outgoing adapter is chosen True

mode standard EtherChannel mode of operation True

netaddr 0 Address to ping True

noloss_failover yes Enable lossless failover after ping failure True

num_retries 3 Times to retry ping before failing True

retry_time 1 Wait time (in seconds) between pings True

use_alt_addr no Enable Alternate EtherChannel Address True

use_jumbo_frame no Enable Gigabit Ethernet Jumbo Frames True

# lsattr -El ent1

alt_addr 0x000000000000 Alternate Ethernet address True

flow_ctrl no Request Transmit and Receive Flow Control True

jumbo_frames no Request Transmit and Receive Jumbo Frames True

large_receive yes Enable receive TCP segment aggregation True

large_send yes Enable hardware Transmit TCP segmentation True

media_speed Auto_Negotiation Requested media speed True

multicore yes Enable Multi-Core Scaling True

rx_cksum yes Enable hardware Receive checksum True

rx_cksum_errd yes Discard RX packets with checksum errors True

rx_clsc 1G Enable Receive interrupt coalescing True

rx_clsc_usec 95 Receive interrupt coalescing window True

rx_coalesce 16 Receive packet coalescing True

rx_q1_num 8192 Number of Receive queue 1 WQEs True

rx_q2_num 4096 Number of Receive queue 2 WQEs True

rx_q3_num 2048 Number of Receive queue 3 WQEs True

tx_cksum yes Enable hardware Transmit checksum True

tx_isb yes Use Transmit Interface Specific Buffers True

tx_q_num 512 Number of Transmit WQEs True

use_alt_addr no Enable alternate Ethernet address True[/quote]