一、建構配置搭建
1、建立一個新的項目，選擇maven來操作
2、要想建構maven項目，代碼庫中必須要有一個maven
3、把maven壓縮包，解壓到一個目錄，在目前目錄下使用git上傳到gitlab項目庫
1
2
3
4
5
<code>git init</code>
<code>git add .</code>
<code>git commit -m </code><code>"maven"</code>
<code>git remote add origin [email protected]:YH02</code><code>/java</code><code>.git</code>
<code>git push origin master</code>
4、在gitlab上面新建構一個項目（例子java）并上傳maven項目代碼
<a href="https://s5.51cto.com/wyfs02/M01/96/01/wKiom1kb83KzusYeAACgW1QU2wM178.png-wh_500x0-wm_3-wmp_4-s_1006171946.png" target="_blank"></a>
<a href="https://s2.51cto.com/wyfs02/M01/96/01/wKioL1kb9rLj8qDSAAB8BpQbOT0829.png-wh_500x0-wm_3-wmp_4-s_756381164.png" target="_blank"></a>
<a href="https://s2.51cto.com/wyfs02/M02/96/01/wKioL1kb9uSAUJ8qAABSstJDpR8438.png-wh_500x0-wm_3-wmp_4-s_2587339791.png" target="_blank"></a>
（1）maven可以在jenkin的系統設定裡面的全局工具設定選項裡面有manven安裝
（2）手動安裝maven
6
7
8
9
10
11
12
13
<code>apache-maven-3.3.9-bin.</code><code>tar</code><code>.gz</code><code># 把包上傳到jenkins伺服器</code>
<code> </code><code>[root@salt-node2 ~]</code><code># tar xf apache-maven-3.3.9-bin.tar.gz -C /data/</code>
<code> </code><code>[root@salt-node2 ~]</code><code># ll /data/</code>
<code>total 0</code>
<code>drwxr-xr-x 6 root root 92 May 14 21:40 apache-maven-3.3.9</code>
<code> </code><code>[root@salt-node2 ~]</code><code># export PATH=$PATH:/data/apache-maven-3.3.9/bin #增加環境變量，可以寫到bashrc裡面</code>
<code> </code><code>[root@salt-node2 ~]</code><code># mvn -v</code>
<code>Apache Maven 3.3.9 (bb52d8502b132ec0a5a3f4c09453c07478323dc5; 2015-11-11T00:41:47+08:00)</code>
<code>Maven home: </code><code>/data/apache-maven-3</code><code>.3.9</code>
<code>Java version: 1.8.0_131, vendor: Oracle Corporation</code>
<code>Java home: </code><code>/usr/lib/jvm/java-1</code><code>.8.0-openjdk-1.8.0.131-2.b11.el7_3.x86_64</code><code>/jre</code>
<code>Default locale: en_US, platform encoding: UTF-8</code>
<code>OS name: </code><code>"linux"</code><code>, version: </code><code>"3.10.0-327.el7.x86_64"</code><code>, arch: </code><code>"amd64"</code><code>, family: </code><code>"unix"</code>
（3）在jenkins裡面填入manve的安裝路徑
<a href="https://s5.51cto.com/wyfs02/M02/96/02/wKioL1kb-Q2RM3f0AACKxYPr2ss365.png-wh_500x0-wm_3-wmp_4-s_884159645.png" target="_blank"></a>
<a href="https://s4.51cto.com/wyfs02/M01/96/02/wKioL1kb-bGjtTuHAABL4y-qc48029.png-wh_500x0-wm_3-wmp_4-s_2245062765.png" target="_blank"></a>
5、SRC是核心檔案，pom檔案是開發提供
6、儲存 開始建構
報錯：
<a href="https://s3.51cto.com/wyfs02/M01/96/06/wKiom1kcCq-RkQioAAP8qGgjtTE320.png-wh_500x0-wm_3-wmp_4-s_811720341.png" target="_blank"></a>
maven庫不能連接配接，由于是國外的伺服器，這裡我們将配置成國内的伺服器
編輯maven的配置檔案
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
<code> </code><code>[root@salt-node2 ~]</code><code># cd /data/apache-maven-3.3.9/</code>
<code> </code><code>[root@salt-node2 </code><code>/data/apache-maven-3</code><code>.3.9]</code><code># cd conf/</code>
<code> </code><code>[root@salt-node2 </code><code>/data/apache-maven-3</code><code>.3.9</code><code>/conf</code><code>]</code><code># ll</code>
<code>total 16</code>
<code>drwxr-xr-x 2 root root 36 Nov 11 2015 logging</code>
<code>-rw-r--r-- 1 root root 10216 Nov 11 2015 settings.xml</code>
<code>-rw-r--r-- 1 root root 3649 Nov 11 2015 toolchains.xml</code>
<code> </code><code>[root@salt-node2 </code><code>/data/apache-maven-3</code><code>.3.9</code><code>/conf</code><code>]</code><code># cp settings.xml settings.xml.bak</code>
<code> </code><code>[root@salt-node2 </code><code>/data/apache-maven-3</code><code>.3.9</code><code>/conf</code><code>]</code><code># vim settings.xml</code>
<code><?xml version=</code><code>"1.0"</code> <code>encoding=</code><code>"UTF-8"</code><code>?></code>
<code><settings xmlns=</code><code>"http://maven.apache.org/SETTINGS/1.0.0"</code>
<code> </code><code>xmlns:xsi=</code><code>"http://www.w3.org/2001/XMLSchema-instance"</code>
<code> </code><code>xsi:schemaLocation=</code><code>"http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd"</code><code>></code>
<code><mirrors></code>
<code> </code><code><mirror></code>
<code> </code><code><</code><code>id</code><code>>yxyc<</code><code>/id</code><code>></code>
<code> </code><code><mirrorOf>*<</code><code>/mirrorOf</code><code>></code>
<code> </code><code><url> </code><code>#鏡像庫 </code>
<code> </code><code><</code><code>/mirror</code><code>></code>
<code> </code><code><</code><code>/mirrors</code><code>></code>
<code> </code><code><profiles></code>
<code> </code><code><profile></code>
<code> </code><code><</code><code>id</code><code>>default<</code><code>/id</code><code>></code>
<code> </code><code><repositories></code>
<code> </code><code><repository></code>
<code> </code><code><</code><code>id</code><code>>public<</code><code>/id</code><code>></code>
<code> </code><code><url> </code><code>#本地庫 </code>
<code> </code><code><releases></code>
<code> </code><code><enabled></code><code>true</code><code><</code><code>/enabled</code><code>></code>
<code> </code><code><</code><code>/releases</code><code>></code>
檢視修改了那些東西
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
<code> </code><code>[root@salt-node2 </code><code>/data/apache-maven-3</code><code>.3.9</code><code>/conf</code><code>]</code><code># diff settings.xml settings.xml.bak </code>
<code>1a2,45</code>
<code>> </code>
<code>> <!--</code>
<code>> Licensed to the Apache Software Foundation (ASF) under one</code>
<code>> or </code><code>more</code> <code>contributor license agreements. See the NOTICE </code><code>file</code>
<code>> distributed with this work </code><code>for</code> <code>additional information</code>
<code>> regarding copyright ownership. The ASF licenses this </code><code>file</code>
<code>> to you under the Apache License, Version 2.0 (the</code>
<code>> </code><code>"License"</code><code>); you may not use this </code><code>file</code> <code>except </code><code>in</code> <code>compliance</code>
<code>> with the License. You may obtain a copy of the License at</code>
<code>> http:</code><code>//www</code><code>.apache.org</code><code>/licenses/LICENSE-2</code><code>.0</code>
<code>> Unless required by applicable law or agreed to </code><code>in</code> <code>writing,</code>
<code>> software distributed under the License is distributed on an</code>
<code>> </code><code>"AS IS"</code> <code>BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY</code>
<code>> KIND, either express or implied. See the License </code><code>for</code> <code>the</code>
<code>> specific language governing permissions and limitations</code>
<code>> under the License.</code>
<code>> --></code>
<code>> | This is the configuration </code><code>file</code> <code>for</code> <code>Maven. It can be specified at two levels:</code>
<code>> |</code>
<code>> | 1. User Level. This settings.xml </code><code>file</code> <code>provides configuration </code><code>for</code> <code>a single user,</code>
<code>> | and is normally provided </code><code>in</code> <code>${user.home}/.m2</code><code>/settings</code><code>.xml.</code>
<code>> | NOTE: This location can be overridden with the CLI option:</code>
<code>> | -s </code><code>/path/to/user/settings</code><code>.xml</code>
<code>> | 2. Global Level. This settings.xml </code><code>file</code> <code>provides configuration </code><code>for</code> <code>all Maven</code>
<code>> | </code><code>users</code> <code>on a machine (assuming they're all using the same Maven</code>
<code>> | installation). It's normally provided </code><code>in</code>
<code>> | ${maven.home}</code><code>/conf/settings</code><code>.xml.</code>
<code>> | -gs </code><code>/path/to/global/settings</code><code>.xml</code>
<code>> | The sections </code><code>in</code> <code>this sample </code><code>file</code> <code>are intended to give you a running start at</code>
<code>> | getting the most out of your Maven installation. Where appropriate, the default</code>
<code>> | values (values used when the setting is not specified) are provided.</code>
<code>> |--></code>
<code>5,31c49,256</code>
<code>< <mirrors> </code>
<code>< <mirror></code>
<code>< <</code><code>id</code><code>>baijia<</code><code>/id</code><code>></code>
<code>< <mirrorOf>*<</code><code>/mirrorOf</code><code>></code>
<code>< <url>http:</code><code>//maven</code><code>.aliyun.com</code><code>/nexus/content/groups/public</code><code><</code><code>/url</code><code>></code>
<code>< <</code><code>/mirror</code><code>></code>
<code>< <</code><code>/mirrors</code><code>></code>
<code>< <profiles></code>
<code>< <profile></code>
<code>< <</code><code>id</code><code>>default<</code><code>/id</code><code>></code>
<code>< <repositories></code>
<code>< <repository></code>
<code>< <</code><code>id</code><code>>public<</code><code>/id</code><code>></code>
<code>< <url>http:</code><code>//maven</code><code>.aliyun.com</code><code>/nexus/content/groups/public</code><code><</code><code>/url</code><code>></code>
<code>< <releases></code>
<code>< <enabled></code><code>true</code><code><</code><code>/enabled</code><code>></code>
<code>< <</code><code>/releases</code><code>></code>
<code>< <snapshots></code>
<code>< <</code><code>/snapshots</code><code>></code>
<code>< <</code><code>/repository</code><code>></code>
<code>< <</code><code>/repositories</code><code>></code>
<code>< <</code><code>/profile</code><code>></code>
<code>< <</code><code>/profiles</code><code>></code>
<code>< <activeProfiles></code>
<code>< <activeProfile>default<</code><code>/activeProfile</code><code>></code>
<code>< <</code><code>/activeProfiles</code><code>></code>
<code>---</code>
<code>> <!-- localRepository</code>
<code>> | The path to the </code><code>local</code> <code>repository maven will use to store artifacts.</code>
<code>> |</code>
<code>> | Default: ${user.home}/.m2</code><code>/repository</code>
<code>> <localRepository></code><code>/path/to/local/repo</code><code><</code><code>/localRepository</code><code>></code>
<code>> --></code>
<code>> <!-- interactiveMode</code>
<code>> | This will determine whether maven prompts you when it needs input. If </code><code>set</code> <code>to </code><code>false</code><code>,</code>
<code>> | maven will use a sensible default value, perhaps based on some other setting, </code><code>for</code>
<code>> | the parameter </code><code>in</code> <code>question.</code>
<code>> | Default: </code><code>true</code>
<code>> <interactiveMode></code><code>true</code><code><</code><code>/interactiveMode</code><code>></code>
<code>> <!-- offline</code>
<code>> | Determines whether maven should attempt to connect to the network when executing a build.</code>
<code>> | This will have an effect on artifact downloads, artifact deployment, and others.</code>
<code>> | Default: </code><code>false</code>
<code>> <offline></code><code>false</code><code><</code><code>/offline</code><code>></code>
<code>> <!-- pluginGroups</code>
<code>> | This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.</code>
<code>> | when invoking a </code><code>command</code> <code>line like </code><code>"mvn prefix:goal"</code><code>. Maven will automatically add the group identifiers</code>
<code>> | </code><code>"org.apache.maven.plugins"</code> <code>and </code><code>"org.codehaus.mojo"</code> <code>if</code> <code>these are not already contained </code><code>in</code> <code>the list.</code>
<code>> |--></code>
<code>> <pluginGroups></code>
<code>> <!-- pluginGroup</code>
<code>> | Specifies a further group identifier to use </code><code>for</code> <code>plugin lookup.</code>
<code>> <pluginGroup>com.your.plugins<</code><code>/pluginGroup</code><code>></code>
<code>> --></code>
<code>> <</code><code>/pluginGroups</code><code>></code>
<code>> <!-- proxies</code>
<code>> | This is a list of proxies </code><code>which</code> <code>can be used on this machine to connect to the network.</code>
<code>> | Unless otherwise specified (by system property or </code><code>command</code><code>-line switch), the first proxy</code>
<code>> | specification </code><code>in</code> <code>this list marked as active will be used.</code>
<code>> <proxies></code>
<code>> <!-- proxy</code>
<code>> | Specification </code><code>for</code> <code>one proxy, to be used </code><code>in</code> <code>connecting to the network.</code>
<code>> |</code>
<code>> <proxy></code>
<code>> <</code><code>id</code><code>>optional<</code><code>/id</code><code>></code>
<code>> <active></code><code>true</code><code><</code><code>/active</code><code>></code>
<code>> <protocol>http<</code><code>/protocol</code><code>></code>
<code>> <username>proxyuser<</code><code>/username</code><code>></code>
<code>> <password>proxypass<</code><code>/password</code><code>></code>
<code>> <host>proxy.host.net<</code><code>/host</code><code>></code>
<code>> <port>80<</code><code>/port</code><code>></code>
<code>> <nonProxyHosts></code><code>local</code><code>.net|some.host.com<</code><code>/nonProxyHosts</code><code>></code>
<code>> <</code><code>/proxy</code><code>></code>
<code>> <</code><code>/proxies</code><code>></code>
<code>> <!-- servers</code>
<code>> | This is a list of authentication profiles, keyed by the server-</code><code>id</code> <code>used within the system.</code>
<code>> | Authentication profiles can be used whenever maven must </code><code>make</code> <code>a connection to a remote server.</code>
<code>> <servers></code>
<code>> <!-- server</code>
<code>> | Specifies the authentication information to use when connecting to a particular server, identified by</code>
<code>> | a unique name within the system (referred to by the </code><code>'id'</code> <code>attribute below).</code>
<code>> | NOTE: You should either specify username</code><code>/password</code> <code>OR privateKey</code><code>/passphrase</code><code>, since these pairings are</code>
<code>> | used together.</code>
<code>> <server></code>
<code>> <</code><code>id</code><code>>deploymentRepo<</code><code>/id</code><code>></code>
<code>> <username>repouser<</code><code>/username</code><code>></code>
<code>> <password>repopwd<</code><code>/password</code><code>></code>
<code>> <</code><code>/server</code><code>></code>
<code>> <!-- Another sample, using keys to authenticate.</code>
<code>> <</code><code>id</code><code>>siteServer<</code><code>/id</code><code>></code>
<code>> <privateKey></code><code>/path/to/private/key</code><code><</code><code>/privateKey</code><code>></code>
<code>> <passphrase>optional; leave empty </code><code>if</code> <code>not used.<</code><code>/passphrase</code><code>></code>
<code>> <</code><code>/servers</code><code>></code>
<code>> <!-- mirrors</code>
<code>> | This is a list of mirrors to be used </code><code>in</code> <code>downloading artifacts from remote repositories.</code>
<code>> | It works like this: a POM may </code><code>declare</code> <code>a repository to use </code><code>in</code> <code>resolving certain artifacts.</code>
<code>> | However, this repository may have problems with heavy traffic at </code><code>times</code><code>, so people have mirrored</code>
<code>> | it to several places.</code>
<code>> | That repository definition will have a unique </code><code>id</code><code>, so we can create a mirror reference </code><code>for</code> <code>that</code>
<code>> | repository, to be used as an alternate download site. The mirror site will be the preferred</code>
<code>> | server </code><code>for</code> <code>that repository.</code>
<code>> <mirrors></code>
<code>> <!-- mirror</code>
<code>> | Specifies a repository mirror site to use instead of a given repository. The repository that</code>
<code>> | this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used</code>
<code>> | </code><code>for</code> <code>inheritance and direct lookup purposes, and must be unique across the </code><code>set</code> <code>of mirrors.</code>
<code>> <mirror></code>
<code>> <</code><code>id</code><code>>mirrorId<</code><code>/id</code><code>></code>
<code>> <mirrorOf>repositoryId<</code><code>/mirrorOf</code><code>></code>
<code>> <name>Human Readable Name </code><code>for</code> <code>this Mirror.<</code><code>/name</code><code>></code>
<code>> <url>http:</code><code>//my</code><code>.repository.com</code><code>/repo/path</code><code><</code><code>/url</code><code>></code>
<code>> <</code><code>/mirror</code><code>></code>
<code>> --></code>
<code>> <</code><code>/mirrors</code><code>></code>
<code>> <!-- profiles</code>
<code>> | This is a list of profiles </code><code>which</code> <code>can be activated </code><code>in</code> <code>a variety of ways, and </code><code>which</code> <code>can modify</code>
<code>> | the build process. Profiles provided </code><code>in</code> <code>the settings.xml are intended to provide </code><code>local</code> <code>machine-</code>
<code>> | specific paths and repository locations </code><code>which</code> <code>allow the build to work </code><code>in</code> <code>the </code><code>local</code> <code>environment.</code>
<code>> | For example, </code><code>if</code> <code>you have an integration testing plugin - like cactus - that needs to know where</code>
<code>> | your Tomcat instance is installed, you can provide a variable here such that the variable is</code>
<code>> | dereferenced during the build process to configure the cactus plugin.</code>
<code>> | As noted above, profiles can be activated </code><code>in</code> <code>a variety of ways. One way - the activeProfiles</code>
<code>> | section of this document (settings.xml) - will be discussed later. Another way essentially</code>
<code>> | relies on the detection of a system property, either matching a particular value </code><code>for</code> <code>the property,</code>
<code>> | or merely testing its existence. Profiles can also be activated by JDK version prefix, where a</code>
<code>> | value of </code><code>'1.4'</code> <code>might activate a profile when the build is executed on a JDK version of </code><code>'1.4.2_07'</code><code>.</code>
<code>> | Finally, the list of active profiles can be specified directly from the </code><code>command</code> <code>line.</code>
<code>> | NOTE: For profiles defined </code><code>in</code> <code>the settings.xml, you are restricted to specifying only artifact</code>
<code>> | repositories, plugin repositories, and </code><code>free</code><code>-form properties to be used as configuration</code>
<code>> | variables </code><code>for</code> <code>plugins </code><code>in</code> <code>the POM.</code>
<code>> <profiles></code>
<code>> <!-- profile</code>
<code>> | Specifies a </code><code>set</code> <code>of introductions to the build process, to be activated using one or </code><code>more</code> <code>of the</code>
<code>> | mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/></code>
<code>> | or the </code><code>command</code> <code>line, profiles have to have an ID that is unique.</code>
<code>> | An encouraged best practice </code><code>for</code> <code>profile identification is to use a consistent naming convention</code>
<code>> | </code><code>for</code> <code>profiles, such as </code><code>'env-dev'</code><code>, </code><code>'env-test'</code><code>, </code><code>'env-production'</code><code>, </code><code>'user-jdcasey'</code><code>, </code><code>'user-brett'</code><code>, etc.</code>
<code>> | This will </code><code>make</code> <code>it </code><code>more</code> <code>intuitive to understand what the </code><code>set</code> <code>of introduced profiles is attempting</code>
<code>> | to accomplish, particularly when you only have a list of profile </code><code>id</code><code>'s </code><code>for</code> <code>debug.</code>
<code>> | This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.</code>
<code>> <profile></code>
<code>> <</code><code>id</code><code>>jdk-1.4<</code><code>/id</code><code>></code>
<code>> <activation></code>
<code>> <jdk>1.4<</code><code>/jdk</code><code>></code>
<code>> <</code><code>/activation</code><code>></code>
<code>> <repositories></code>
<code>> <repository></code>
<code>> <</code><code>id</code><code>>jdk14<</code><code>/id</code><code>></code>
<code>> <name>Repository </code><code>for</code> <code>JDK 1.4 builds<</code><code>/name</code><code>></code>
<code>> <url>http:</code><code>//www</code><code>.myhost.com</code><code>/maven/jdk14</code><code><</code><code>/url</code><code>></code>
<code>> <layout>default<</code><code>/layout</code><code>></code>
<code>> <snapshotPolicy>always<</code><code>/snapshotPolicy</code><code>></code>
<code>> <</code><code>/repository</code><code>></code>
<code>> <</code><code>/repositories</code><code>></code>
<code>> <</code><code>/profile</code><code>></code>
<code>> <!--</code>
<code>> | Here is another profile, activated by the system property </code><code>'target-env'</code> <code>with a value of </code><code>'dev'</code><code>,</code>
<code>> | </code><code>which</code> <code>provides a specific path to the Tomcat instance. To use this, your plugin configuration</code>
<code>> | might hypothetically </code><code>look</code> <code>like:</code>
<code>> | ...</code>
<code>> | <plugin></code>
<code>> | <groupId>org.myco.myplugins<</code><code>/groupId</code><code>></code>
<code>> | <artifactId>myplugin<</code><code>/artifactId</code><code>></code>
<code>> | <configuration></code>
<code>> | <tomcatLocation>${tomcatPath}<</code><code>/tomcatLocation</code><code>></code>
<code>> | <</code><code>/configuration</code><code>></code>
<code>> | <</code><code>/plugin</code><code>></code>
<code>> | NOTE: If you just wanted to inject this configuration whenever someone </code><code>set</code> <code>'target-env'</code> <code>to</code>
<code>> | anything, you could just leave off the <value/> inside the activation-property.</code>
<code>> <</code><code>id</code><code>></code><code>env</code><code>-dev<</code><code>/id</code><code>></code>
<code>> <property></code>
<code>> <name>target-</code><code>env</code><code><</code><code>/name</code><code>></code>
<code>> <value>dev<</code><code>/value</code><code>></code>
<code>> <</code><code>/property</code><code>></code>
<code>> <properties></code>
<code>> <tomcatPath></code><code>/path/to/tomcat/instance</code><code><</code><code>/tomcatPath</code><code>></code>
<code>> <</code><code>/properties</code><code>></code>
<code>> <</code><code>/profiles</code><code>></code>
<code>> <!-- activeProfiles</code>
<code>> | List of profiles that are active </code><code>for</code> <code>all builds.</code>
<code>> <activeProfiles></code>
<code>> <activeProfile>alwaysActiveProfile<</code><code>/activeProfile</code><code>></code>
<code>> <activeProfile>anotherAlwaysActiveProfile<</code><code>/activeProfile</code><code>></code>
<code>> <</code><code>/activeProfiles</code><code>></code>
二、部署
上面的建構完畢後，接下來是部署了。
我們要在java1上配置裡面，寫入新的内容，來完成建構完畢後，自動部署的功能！！！
<a href="https://s3.51cto.com/wyfs02/M01/96/07/wKiom1kcD4iyuoS4AABRI3UcMLo905.png-wh_500x0-wm_3-wmp_4-s_2671226201.png" target="_blank"></a>
jenkins 打包完畢後，檔案會生成到這個目錄
<code> </code><code>[root@salt-node2 ~]</code><code># cd /var/lib/jenkins/jobs/</code>
<code>java/ java1/ PHP/ php-deploy/ </code>
<code> </code><code>[root@salt-node2 ~]</code><code># cd /var/lib/jenkins/jobs/java1/</code>
<code>builds/ lastStable/ modules/ workspace/ </code>
<code>config.xml lastSuccessful/ nextBuildNumber </code>
<code> </code><code>[root@salt-node2 ~]</code><code># cd /var/lib/jenkins/jobs/java1/workspace/</code>
<code> </code><code>[root@salt-node2 </code><code>/var/lib/jenkins/jobs/java1/workspace</code><code>]</code><code># ll</code>
<code>total 8</code>
<code>-rw-r--r-- 1 root root 1574 May 14 22:13 pom.xml</code>
<code>drwxr-xr-x 4 root root 28 May 14 22:13 src</code>
<code>drwxr-xr-x 7 root root 4096 May 14 22:25 target</code>
<code> </code><code>[root@salt-node2 </code><code>/var/lib/jenkins/jobs/java1/workspace</code><code>]</code><code># cd target/</code>
<code> </code><code>[root@salt-node2 </code><code>/var/lib/jenkins/jobs/java1/workspace/target</code><code>]</code><code># ll</code>
<code>drwxr-xr-x 3 root root 16 May 14 22:23 classes</code>
<code>drwxr-xr-x 2 root root 27 May 14 22:24 maven-archiver</code>
<code>drwxr-xr-x 3 root root 34 May 14 22:23 maven-status</code>
<code>-rw-r--r-- 1 root root 2435 May 14 22:24 original-testweb-0.0.1-SNAPSHOT.jar</code>
<code>drwxr-xr-x 2 root root 79 May 14 22:23 surefire-reports</code>
<code>drwxr-xr-x 3 root root 16 May 14 22:23 </code><code>test</code><code>-classes</code>
<code>-rw-r--r-- 1 root root 2662 May 14 22:25 testweb-0.0.1-SNAPSHOT.jar</code>
三 maven下載下傳的jar包存放在那裡了
在家目錄下面有一個.m2檔案，下載下傳的jar包都會儲存在本地這裡
<code> </code><code>[root@salt-node2 ~]</code><code># cd .m2/</code>
<code> </code><code>[root@salt-node2 ~/.m2]</code><code># ll</code>
<code>total 4</code>
<code>drwxr-xr-x 13 root root 4096 May 14 22:24 repository</code>
<code> </code><code>[root@salt-node2 ~/.m2]</code><code># cd repository/</code>
<code> </code><code>[root@salt-node2 ~/.m2</code><code>/repository</code><code>]</code><code># ll</code>
<code>drwxr-xr-x 6 root root 66 May 14 22:24 asm</code>
<code>drwxr-xr-x 3 root root 37 May 14 22:21 backport-util-concurrent</code>
<code>drwxr-xr-x 3 root root 24 May 14 22:19 classworlds</code>
<code>drwxr-xr-x 4 root root 29 May 14 22:25 com</code>
<code>drwxr-xr-x 3 root root 24 May 14 22:19 commons-cli</code>
<code>drwxr-xr-x 3 root root 25 May 14 22:24 commons-lang</code>
<code>drwxr-xr-x 3 root root 32 May 14 22:21 commons-logging</code>
<code>drwxr-xr-x 3 root root 17 May 14 22:24 jdom</code>
<code>drwxr-xr-x 3 root root 18 May 14 22:18 junit</code>
<code>drwxr-xr-x 3 root root 18 May 14 22:21 log4j</code>
<code>drwxr-xr-x 6 root root 61 May 14 22:21 org</code>
本文轉自 kesungang 51CTO部落格，原文連結：http://blog.51cto.com/sgk2011/1926750，如需轉載請自行聯系原作者
![Java String.format方法的簡單使用[圖]](data:image/gif;base64,R0lGODlhAQABAIAAAP///wAAACwAAAAAAQABAAACAkQBADs=)