实战配置Nagios主机及服务实战

目录
1 在客户服务器上配置... 1
1.1配置nrpe. 1
1) 加入可以监控该服务器的nagios server端的IP。... 1
2) 注释掉或者干脆删除199-203行即下面几行... 1
2 配置 nagios 监控服务... 1
1）nagios.cfg 基本配置... 1
2）注意：需要注释掉如下localhost.cfg 行，否则和我们要配的会冲突原 36 行... 1
3）需要在host.cfg 里添加客户端主机和主机组（HOST GROUP）... 1
4）同理添加要监控的服务配置到service.cfg. 1
5）重启服务... 1
3 错误整理... 1
1）错误1. 1
2）错误2：... 1
3）问题3. 1
4）问题4. 1
 
 
 
1 在客户服务器上配置
 
1.1配置nrpe
cd /usr/local/nagios/etc
#config nrpe.cfg 
vi nrpe.cfg +79
 
1) 加入可以监控该服务器的nagios server端的IP。
allowed_hosts=127.0.0.1,172.16.1.196,172.16.1.190  ←主机的IP
 
 
 
2) 注释掉或者干脆删除199-203行即下面几行
 
shift+g到结尾

#command[check_users]=/usr/local/nagios/libexec/check_users-w $ARG1$ -c $ARG2$
#command[check_load]=/usr/local/nagios/libexec/check_load-w $ARG1$ -c $ARG2$
#command[check_disk]=/usr/local/nagios/libexec/check_disk-w $ARG1$ -c $ARG2$ -p $ARG3$
#command[check_procs]=/usr/local/nagios/libexec/check_procs-w $ARG1$ -c $ARG2$ -s $ARG3$
 
同时在下面新添加要监控的内容：
command[check_load]=/usr/local/nagios/libexec/check_load-w 15,10,6 -c 30,25,20
command[check_mem]=/usr/local/nagios/libexec/check_memory.pl-w 6% -c 3%
command[check_disk]=/usr/local/nagios/libexec/check_disk-w 20% -c 8% -p /
command[check_swap]=/usr/local/nagios/libexec/check_swap-w 20% -c 10%
command[check_iostat]=/usr/local/nagios/libexec/check_iostat-w 6 -c 10
或者：
echo"command[check_load]=/usr/local/nagios/libexec/check_load -w 15,10,6 -c30,25,20">>/usr/local/nagios/etc/nrpe.cfg
echo"command[check_mem]=/usr/local/nagios/libexec/check_memory.pl -w 6% -c3%">>/usr/local/nagios/etc/nrpe.cfg
echo"command[check_disk]=/usr/local/nagios/libexec/check_disk -w 20% -c 8% -p/">>/usr/local/nagios/etc/nrpe.cfg
echo"command[check_swap]=/usr/local/nagios/libexec/check_swap -w 20% -c10%">>/usr/local/nagios/etc/nrpe.cfg
echo"command[check_iostat]=/usr/local/nagios/libexec/check_iostat -w 6 -c10">>/usr/local/nagios/etc/nrpe.cfg
 
 
 
1.2启动：nagios client
 
 
[root@client01 etc]# 
[root@client01 etc]# pkill nrpe
[root@client01etc]# /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
[root@client01 etc]# echo"/usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d">> /etc/rc.local 
[root@client01etc]# ps -ef|grep nrpe
nagios   32431      1  0 12:44 ?        00:00:00 /usr/local/nagios/bin/nrpe -c/usr/local/nagios/etc/nrpe.cfg -d
root     32433  32397  0 12:44 pts/0    00:00:00 grep nrpe
[root@client01 etc]#
 
注意：
1、#执行完启动命令，进行检查是个良好的习惯
2、tips:重起nagios nrpe组合命令
         pkillnrpe && /usr/local/nagios/bin/nrpe -c /usr/local/nagios/etc/nrpe.cfg -d
 
 
1.3 关闭防火墙
 
         测试环境，建议最好先把iptables关掉，等nagios都测试通了在来调试iptables，否则给学习测试增加了复杂度。
         关闭命令
                   /etc/init.d/iptablesstop
 
 
 
 
 
2 配置 nagios 监控服务
 
以下为server 端的操作
 
1）nagios.cfg 基本配置
 
在 nagios.cfg 文件中找到cfg_file 的部分，进行如下设置：
 
 
[root@nagios-server etc]# vi/usr/local/nagios/etc/nagios.cfg +34
# You can specify individualobject config files as shown below:
cfg_file=/usr/local/nagios/etc/objects/commands.cfg
cfg_file=/usr/local/nagios/etc/objects/contacts.cfg
cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg
cfg_file=/usr/local/nagios/etc/objects/templates.cfg
cfg_file=/usr/local/nagios/etc/objects/services.cfg
cfg_file=/usr/local/nagios/etc/objects/hosts.cfg
 
 
 
 
2）注意：需要注释掉如下localhost.cfg行，否则和我们要配的会冲突原 36 行
 
# Definitions for monitoring the local (Linux) host
#cfg_file=/usr/local/nagios/etc/objects/localhost.cfg
 
 
3）需要在host.cfg 里添加客户端主机和主机组（HOSTGROUP）
 
 
[root@nagios-serveretc]# cd /usr/local/nagios/etc/objects/
[root@nagios-server objects]# vihosts.cfg
 
# Define a host for the local machine
 
define host{
        use                      linux-server
        host_name               18-client01
        alias                     18-client01
        address                  192.168.1.18
        }
 
define host{
        use                     linux-server
        host_name               19-nagios_server
        alias                   19-nagios_server
        address                 192.168.1.19
        }
 
define hostgroup{
        hostgroup_name  linux-servers ; The name of the hostgroup
        alias           Linux Servers ; Long name of thegroup
        members         18-client01,19-nagios_server
        }
 
 
4）同理添加要监控的服务配置到service.cfg
 
 
[root@nagios-serverobjects]# cd /usr/local/nagios/etc/objects/
[root@nagios-serverobjects]# vi services.cfg
define service {
        use generic-service
        host_name 18-client01
        service_description Disk Partition
        check_command check_nrpe!check_disk
}
 
 
 
 
5）重启服务
 
 
 
[root@nagios-server objects]#/usr/local/nagios/libexec/check_nrpe -H 192.168.l.18 -c check_disk
Invalid host name '192.168.l.18'
[root@nagios-server objects]# ll         
[root@nagios-serverobjects]# /etc/init.d/nagios reload
 
 
 
 
 
 
 
 
 
3 错误整理
 
 
1）错误1
 
[root@nagios-server objects]#/etc/init.d/nagios checkconfig
Running configuration check...CONFIG ERROR!  Check your Nagiosconfiguration.
[root@nagios-server objects]#/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
 
Checking services...
Error: There are no servicesdefined!
        Checked 0 services.
Total Warnings: 2
Total Errors:   1
处理方法：
[root@nagios-server objects]# vim/etc/init.d/nagios +178   
status)
               pid_nagios
# /dev/null 2>&1;
               ;;
 
       checkconfig)
 
 
 
2）错误2：
 
[root@nagios-server objects]#/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
 
问题2：
Checking services...
Error: There are no servicesdefined!
        Checked 0 services.
处理方法:
[root@nagios-serverobjects]# vi services.cfg 
defineservice {
        use generic-service
        host_name 18-client01
        service_description Disk Partition
        check_command check_nrpe!check_disk
}
"services.cfg"8L, 138C written
 
 
[root@nagios-server objects]# /etc/init.d/nagioscheckconfig
 
 
 
 
3）问题3
问题3：
Checking services...
Error: Service check command'check_nrpe' specified in service 'Disk Partition' for host '18-client01' notdefined anywhere!
        Checked 1 services.
处理方法：
[root@nagios-serverobjects]# vi commands.cfg
#'check_nrpe' command definition
definecommand{
        command_name    check_nrpe
        command_line    $USER1$/check_nrpe -H $HOSTADDRESS$ -c$ARG1$
        }
 
 
 
4）问题4
 
打开网页会出现
It appears as though you do not have permission toview information for any of theservices you requested...
解决方法
[root@nagiosserver objects]#cd/usr/local/nagios/etc
[root@nagiosserver objects]#vi cgi.cfg +119
#把在1.6 节建立的用户oldboy 加到后面，注意用逗号隔开。
#default_user_name=oldboy
authorized_for_system_information=nagiosadmin,oldboy
authorized_for_configuration_information=nagiosadmin,oldboy
authorized_for_system_commands=nagiosadmin,oldboy
authorized_for_all_services=nagiosadmin,oldboy
authorized_for_all_hosts=nagiosadmin,oldboy
authorized_for_all_service_commands=nagiosadmin,oldboy
authorized_for_all_host_commands=nagiosadmin,oldboy
 
记得reload nagios 命令为：/etc/init.d/nagios reload

实战配置Nagios主机及服务实战

继续阅读

Apache (You don't have permission to access / on this server.）

debian9升级4.9.0内核到4.19.2内核过程

centOS7 配置 vsftpd 虚拟用户及权限Vsftpd配置虚拟用户及权限

linux-svn卸载与安装

vsftp虚拟多用户多权限一键部署脚本

Ubuntu14.04 LTS下安装mongodb

Nginx服务优化（1）——隐藏版本号、修改用户与组、网页缓存时间、日志切割、连接超时一、隐藏版本号二、修改用户与组三、配置Nginx网页缓存时间四、实现Nginx日志分割五、配置Nginx实现连接超时六、补充关于时间日期的命令

httpd服务的部署、启动、配置和简单优化一、部署二、启动三、配置文件

配置网页内容访问

手动安装Intel network I217-LM网卡的Linux驱动

禁止ubuntu系统弹出报错界面

Ubuntu Linux下Apache的配置文件

samba服务器的功能

【Linux】UDP广播报文接收速率问题

Linux设备模型（中）之上层容器

PowerPC平台 Linux移植三