VTS-DEBUG VtsHalCameraProviderV2_4TargetTest CameraHidlTest.noHal1AfterP FAIL

Android Q vts 测试failed 项

09-02 09:58:06.205 ERROR <testsuites tests="1" failures="1" disabled="0" errors="0" timestamp="2020-09-02T01:58:06" time="0.008" name="AllTests">
09-02 09:58:06.205 ERROR   <testsuite name="CameraHidlTest" tests="1" failures="1" disabled="0" errors="0" time="0.008">
09-02 09:58:06.205 ERROR     <testcase name="noHal1AfterP" status="run" time="0.008" classname="CameraHidlTest">
09-02 09:58:06.205 ERROR       <failure message="hardware/interfaces/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp:1570&#x0A;Expected: (deviceVersion) != (CAMERA_DEVICE_API_VERSION_1_0), actual: 256 vs 256" type=""><![CDATA[hardware/interfaces/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp:1570
09-02 09:58:06.205 ERROR Expected: (deviceVersion) != (CAMERA_DEVICE_API_VERSION_1_0), actual: 256 vs 256]]></failure>
09-02 09:58:06.205 ERROR     </testcase>
09-02 09:58:06.205 ERROR   </testsuite>
09-02 09:58:06.205 ERROR </testsuites>
09-02 09:58:06.205 ERROR hardware/interfaces/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp:1570
Expected: (deviceVersion) != (CAMERA_DEVICE_API_VERSION_1_0), actual: 256 vs 256
09-02 09:58:06.205 ERROR [Test Case] 1/43 CameraHidlTest.noHal1AfterP(legacy/0)_64bit FAIL

测试的fail项是CameraHidlTest.noHal1AfterP ，看名字就知道是要android P 之后不能有Camera Hal1

查看报错的文件hardware/interfaces/camera/provider/2.4/vts/functional/VtsHalCameraProviderV2_4TargetTest.cpp

// Test devices with first_api_level >= P does not advertise [email protected]
TEST_F(CameraHidlTest, noHal1AfterP) {
    constexpr int32_t HAL1_PHASE_OUT_API_LEVEL = 28;
    int32_t firstApiLevel = 0;
    getFirstApiLevel(&firstApiLevel);

    // all devices with first API level == 28 and <= 1GB of RAM must set low_ram
    // and thus be allowed to continue using HAL1
    if ((firstApiLevel == HAL1_PHASE_OUT_API_LEVEL) &&
        (property_get_bool("ro.config.low_ram", /*default*/ false))) {
        ALOGI("Hal1 allowed for low ram device");
        return;
    }

    if (firstApiLevel >= HAL1_PHASE_OUT_API_LEVEL) {
        hidl_vec<hidl_string> cameraDeviceNames = getCameraDeviceNames(mProvider);
        for (const auto& name : cameraDeviceNames) {
            int deviceVersion = getCameraDeviceVersion(name, mProviderType);
            ASSERT_NE(deviceVersion, 0); // Must be a valid device version
            ASSERT_NE(deviceVersion, CAMERA_DEVICE_API_VERSION_1_0); // Must not be [email protected]
        }
    }
}

deviceVersion Must not be [email protected]，

查看deviceVersion 生成逻辑，

int getCameraDeviceVersion(const hidl_string& deviceName,
            const hidl_string &providerType) {
        std::string version;
        bool match = matchDeviceName(deviceName, providerType, &version, nullptr);
        if (!match) {
            return -1;
        }

        if (version.compare(kHAL3_5) == 0) {
            return CAMERA_DEVICE_API_VERSION_3_5;
        } else if (version.compare(kHAL3_4) == 0) {
            return CAMERA_DEVICE_API_VERSION_3_4;
        } else if (version.compare(kHAL3_3) == 0) {
            return CAMERA_DEVICE_API_VERSION_3_3;
        } else if (version.compare(kHAL3_2) == 0) {
            return CAMERA_DEVICE_API_VERSION_3_2;
        } else if (version.compare(kHAL1_0) == 0) {
            return CAMERA_DEVICE_API_VERSION_1_0;
        }
        return 0;
    }

是从version判断的，version又是从deviceName来的，看log deviceName格式是3303:09-02 01:58:38.540 15587 15587 I camera_hidl_hal_test: Camera Id[0] is [email protected]/legacy/0

查看deviceName

hidl_vec<hidl_string> CameraHidlTest::getCameraDeviceNames(sp<ICameraProvider> provider) {
    std::vector<std::string> cameraDeviceNames;
    Return<void> ret;
    ret = provider->getCameraIdList(
        [&](auto status, const auto& idList) {
            ALOGI("getCameraIdList returns status:%d", (int)status);
            for (size_t i = 0; i < idList.size(); i++) {
                ALOGI("Camera Id[%zu] is %s", i, idList[i].c_str());
            }
            ASSERT_EQ(Status::OK, status);
            for (const auto& id : idList) {
                cameraDeviceNames.push_back(id);
            }
        });
    if (!ret.isOk()) {
        ADD_FAILURE();
    }

    // External camera devices are reported through cameraDeviceStatusChange
    struct ProviderCb : public ICameraProviderCallback {
        virtual Return<void> cameraDeviceStatusChange(
                const hidl_string& devName,
                CameraDeviceStatus newStatus) override {
            ALOGI("camera device status callback name %s, status %d",
                    devName.c_str(), (int) newStatus);
            if (newStatus == CameraDeviceStatus::PRESENT) {
                externalCameraDeviceNames.push_back(devName);

            }
            return Void();
        }

        virtual Return<void> torchModeStatusChange(
                const hidl_string&, TorchModeStatus) override {
            return Void();
        }

        std::vector<std::string> externalCameraDeviceNames;
    };
    sp<ProviderCb> cb = new ProviderCb;
    auto status = mProvider->setCallback(cb);

    for (const auto& devName : cb->externalCameraDeviceNames) {
        if (cameraDeviceNames.end() == std::find(
                cameraDeviceNames.begin(), cameraDeviceNames.end(), devName)) {
            cameraDeviceNames.push_back(devName);
        }
    }

    hidl_vec<hidl_string> retList(cameraDeviceNames.size());
    for (size_t i = 0; i < cameraDeviceNames.size(); i++) {
        retList[i] = cameraDeviceNames[i];
    }
    return retList;
}

看provider->getCameraIdList 到hardware/interfaces/camera/provider/2.4/default/LegacyCameraProviderImpl_2_4.cpp

Return<void> LegacyCameraProviderImpl_2_4::getCameraIdList(
        ICameraProvider::getCameraIdList_cb _hidl_cb) {
    std::vector<hidl_string> deviceNameList;
    for (auto const& deviceNamePair : mCameraDeviceNames) {
        if (std::stoi(deviceNamePair.first) >= mNumberOfLegacyCameras) {
            // External camera devices must be reported through the device status change callback,
            // not in this list.
            continue;
        }
        if (mCameraStatusMap[deviceNamePair.first] == CAMERA_DEVICE_STATUS_PRESENT) {
            deviceNameList.push_back(deviceNamePair.second);
        }
    }
    hidl_vec<hidl_string> hidlDeviceNameList(deviceNameList);
    _hidl_cb(Status::OK, hidlDeviceNameList);
    return Void();
}

mCameraDeviceNames

void LegacyCameraProviderImpl_2_4::addDeviceNames(int camera_id, CameraDeviceStatus status, bool cam_new)
{
    char cameraId[kMaxCameraIdLen];
    snprintf(cameraId, sizeof(cameraId), "%d", camera_id);
    std::string cameraIdStr(cameraId);

    mCameraIds.add(cameraIdStr);

    // initialize mCameraDeviceNames and mOpenLegacySupported
    mOpenLegacySupported[cameraIdStr] = false;
    int deviceVersion = mModule->getDeviceVersion(camera_id);
    auto deviceNamePair = std::make_pair(cameraIdStr,
                                         getHidlDeviceName(cameraIdStr, deviceVersion));
    mCameraDeviceNames.add(deviceNamePair);
    if (cam_new) {
        mCallbacks->cameraDeviceStatusChange(deviceNamePair.second, status);
    }
    if (deviceVersion >= CAMERA_DEVICE_API_VERSION_3_2 &&
            mModule->isOpenLegacyDefined()) {
        // try open_legacy to see if it actually works
        if ((property_get_bool("ro.config.low_ram", /*default*/ false))) {
           deviceNamePair = std::make_pair(cameraIdStr,
                            getHidlDeviceName(cameraIdStr, CAMERA_DEVICE_API_VERSION_1_0));
           mCameraDeviceNames.add(deviceNamePair);
           if (cam_new) {
              mCallbacks->cameraDeviceStatusChange(deviceNamePair.second, status);
           }
          } else {
            struct hw_device_t* halDev = nullptr;
            int ret = mModule->openLegacy(cameraId, CAMERA_DEVICE_API_VERSION_1_0, &halDev);
            if (ret == 0) {
               mOpenLegacySupported[cameraIdStr] = true;
               halDev->close(halDev);
               deviceNamePair = std::make_pair(cameraIdStr,
                                getHidlDeviceName(cameraIdStr, CAMERA_DEVICE_API_VERSION_1_0));
               mCameraDeviceNames.add(deviceNamePair);
               if (cam_new) {
                 mCallbacks->cameraDeviceStatusChange(deviceNamePair.second, status);
              }
            } else if (ret == -EBUSY || ret == -EUSERS) {
            // Looks like this provider instance is not initialized during
            // system startup and there are other camera users already.
            // Not a good sign but not fatal.
              ALOGW("%s: open_legacy try failed!", __FUNCTION__);
            }
         }
    }
}

getHidlDeviceName devicename 的格式就是在这边定义的

std::string LegacyCameraProviderImpl_2_4::getHidlDeviceName(
        std::string cameraId, int deviceVersion) {
    // Maybe consider create a version check method and SortedVec to speed up?
    if (deviceVersion != CAMERA_DEVICE_API_VERSION_1_0 &&
            deviceVersion != CAMERA_DEVICE_API_VERSION_3_2 &&
            deviceVersion != CAMERA_DEVICE_API_VERSION_3_3 &&
            deviceVersion != CAMERA_DEVICE_API_VERSION_3_4 &&
            deviceVersion != CAMERA_DEVICE_API_VERSION_3_5 &&
            deviceVersion != CAMERA_DEVICE_API_VERSION_3_6) {
        return hidl_string("");
    }

    // Supported combinations:
    // CAMERA_DEVICE_API_VERSION_1_0 -> [email protected]
    // CAMERA_DEVICE_API_VERSION_3_[2-4] -> ICameraDevice@[3.2|3.3]
    // CAMERA_DEVICE_API_VERSION_3_5 + CAMERA_MODULE_API_VERSION_2_4 -> [email protected]
    // CAMERA_DEVICE_API_VERSION_3_[5-6] + CAMERA_MODULE_API_VERSION_2_5 -> [email protected]
    bool isV1 = deviceVersion == CAMERA_DEVICE_API_VERSION_1_0;
    int versionMajor = isV1 ? 1 : 3;
    int versionMinor = isV1 ? 0 : mPreferredHal3MinorVersion;
    if (deviceVersion == CAMERA_DEVICE_API_VERSION_3_5) {
        if (mModule->getModuleApiVersion() == CAMERA_MODULE_API_VERSION_2_5) {
            versionMinor = 5;
        } else {
            versionMinor = 4;
        }
    } else if (deviceVersion == CAMERA_DEVICE_API_VERSION_3_6) {
        versionMinor = 5;
    }
    char deviceName[kMaxCameraDeviceNameLen];
    snprintf(deviceName, sizeof(deviceName), "device@%d.%d/legacy/%s",
            versionMajor, versionMinor, cameraId.c_str());
    return deviceName;
}

在看上面addDeviceNames的逻辑 mModule->isOpenLegacyDefined() 有定义OpenLegacy的话和 mModule->openLegacy 打开成功的话会使用CAMERA_DEVICE_API_VERSION_1_0

hardware/interfaces/camera/common/1.0/default/CameraModule.cpp

bool CameraModule::isOpenLegacyDefined() const {
    if (getModuleApiVersion() < CAMERA_MODULE_API_VERSION_2_3) {
        return false;
    }
    return mModule->open_legacy != NULL;
}

int CameraModule::openLegacy(
        const char* id, uint32_t halVersion, struct hw_device_t** device) {
    int res;
    ATRACE_BEGIN("camera_module->open_legacy");
    res = mModule->open_legacy(&mModule->common, id, halVersion, device);
    ATRACE_END();
    return res;
}

查找open_legacy

在hardware/qcom/camera/QCamera2/QCamera2Hal.cpp 有这么个定义配置

// Camera dependencies
#include "QCamera2Factory.h"
#include "util/QCameraCommon.h"
#include "HAL3/QCamera3VendorTags.h"
#include "util/QCameraCommon.h"

static hw_module_t camera_common = {
    .tag                    = HARDWARE_MODULE_TAG,
    .module_api_version     = CAMERA_MODULE_API_VERSION_2_4,
    .hal_api_version        = HARDWARE_HAL_API_VERSION,
    .id                     = CAMERA_HARDWARE_MODULE_ID,
    .name                   = "QCamera Module",
    .author                 = "Qualcomm Innovation Center Inc",
    .methods                = &qcamera::QCamera2Factory::mModuleMethods,
    .dso                    = NULL,
    .reserved               = {0}
};

camera_module_t HAL_MODULE_INFO_SYM = {
    .common                 = camera_common,
    .get_number_of_cameras  = qcamera::QCamera2Factory::get_number_of_cameras,
    .get_camera_info        = qcamera::QCamera2Factory::get_camera_info,
    .set_callbacks          = qcamera::QCamera2Factory::set_callbacks,
    .get_vendor_tag_ops     = qcamera::QCamera3VendorTags::get_vendor_tag_ops,
    .open_legacy            = (qcamera::QCameraCommon::needHAL1Support()) ?
                                    qcamera::QCamera2Factory::open_legacy : NULL,
    .set_torch_mode         = qcamera::QCamera2Factory::set_torch_mode,
    .init                   = NULL,
    .reserved               = {0}
};

needHAL1Support

hardware/qcom/camera/QCamera2/util/QCameraCommon.cpp

/*===========================================================================
 * FUNCTION   : needHAL1Support
 *
 * DESCRIPTION: Function to check whether HAL1 is supported or not.
 *
 * PARAMETERS : None
 *
 * RETURN     : TRUE -- HAL1/HAL3 supported target.
 *              FALSE -- Only HAL3 supported target.
 *==========================================================================*/
bool QCameraCommon::needHAL1Support()
{
    char prop[PROPERTY_VALUE_MAX];
    memset(prop, 0, PROPERTY_VALUE_MAX);
    property_get("persist.vendor.camera.hal1.enable",prop,"");

    if(0 < strlen(prop))
    {
        return (atoi(prop) == 1);
    }

#ifdef SUPPORT_ONLY_HAL3
        LOGI("ONLY HAL3 SUPPORTED");
        return FALSE;
#else
    // HAL1/HAL3 is supported
    LOGI("HAL1/HAL3 IS SUPPORTED");
    return TRUE;
#endif

#ifndef HAS_LOW_RAM
     // QM215, QM2150 non-GO supports only HAL3
     if ((is_target_QM215() || is_target_QM2150())) {
         LOGI("ONLY HAL3 SUPPORTED");
         return FALSE;
     }
#else
     // HAL1/HAL3 is supported
     LOGI("HAL1/HAL3 IS SUPPORTED");
     return TRUE;
#endif
}

到此就比较明了了，解决方法有以下几个可行

1.设置 prop persist.vendor.camera.hal1.enable = 0 关闭hal1

2.定义SUPPORT_ONLY_HAL3 仅允许使用hal3

3.修改QCamera2Hal.cpp 将 “.open_legacy = (qcamera::QCameraCommon::needHAL1Support()) ? qcamera::QCamera2Factory::open_legacy : NULL”, 直接赋值 NULL “.open_legacy = NULL”

其中第二点SUPPORT_ONLY_HAL3 修改文件 hardware/qcom/camera/QCamera2/Android.mk

修改下满足条件即可

ifneq (,$(filter $(TRINKET) msm8937_32go-userdebug, $(TARGET_BOARD_PLATFORM)))
LOCAL_CFLAGS += -DSUPPORT_ONLY_HAL3
endif

VTS-DEBUG VtsHalCameraProviderV2_4TargetTest CameraHidlTest.noHal1AfterP FAIL

继续阅读

Android 9.0灭屏流程Android 9.0灭屏流程Power键灭屏

如何下载Android源码

通过镜像下载Android源码一、android编译环境二、下载源码三、编译源码

ClassNotFoundException 案例前言一、onSaveInstanceState二、performLaunchActivity三、原因探究

在Kotlin中使用TypeToken配合Gson

[Android GMS 认证] VTS/CTS on GSI相关问题

Android VTS学习

CentOS 7 下 NGINX 增加 nginx-module-vts 模块

VTS 测试环境问题：ERROR: package "setuptools requires a different Python 2.7.12 not in '>=3.5'"

几款Android 反编译 IDE

Android VTS test

BACnet/IP之BACnet4j学习VTS创建虚拟设备及点位测试031.下载VTS2.安装3.创建虚拟设备及点位4.端口及协议设置5.客户端测试

Android 虚拟机 — .dex 文件格式前言示例一、.dex 文件结构总结

android aosp 源码版本

android-Handler源码解析

Android SDK源码提取Python脚本(4.0SDK源码下载地址)