XP下VC2008 Express + DDK Wizard配置WDK驱动开发环境详细分析

1. 安装VS2008/DDK Wizard 。 2. Copy ddkbuild.cmd 到WinDDK 根目录。 3. 设置系统环境变量 :    XP设置 :  WXPBASE :C:\WinDDK\7600.16385.1

4. 在VS2008 中添加 include /lib/executale 目录

=============================================== 上述设置后，VS 编译一直不过。  

手动使用WDK 的CMD 编译，发现编译错误，把项目路径中的所有空格去掉。

再次使用VS编译仍然无法编译通过，所以狠下决心直接分析编译脚本。

问题1： echo "FINDSTR is a prerequisite but wasn't found!"

查看ddkbuild.cmd 脚本后发现为： findstr /? > NUL 2>&1 || echo "FINDSTR is a prerequisite but wasn't found!" && goto :EOF 失败，手动执行在console上执行findstr 提示“区域语言无法设置”，查看自己区域语言设置发现，中文语言未安装，安装后该问题OK 。

这时已经可以使用VS2008 编译生成sys文件。

问题2：虽然设置为WXP，但编译出来的目录为objchk_win7_x86

既然是参数的问题，不得不解读完整的脚本了。脚本分析如下：

a. ddkbuild.cmd 脚本 剖析！ :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: / MAIN function of the script

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:MAIN

:: Building "stack frame"

setlocal ENABLEEXTENSIONS & pushd .

:: Check whether the REG utility is available

reg /? > NUL 2>&1 && set OSR_REGAVAILABLE=1

:: This is set by client-side keyword substitution

set SVN_REVISION=$Revision: 60 $

:: Extract the revision number from the revision keyword

set SVN_REVISION=%SVN_REVISION:~0,-2%

set SVN_REVISION=%SVN_REVISION:~11%

:: This is set by client-side keyword substitution

set SVN_REVDATE=$Date: 2009-11-28 04:28:01 +0000 (Sat, 28 Nov 2009) $

:: Extract the date from the Date keyword

set SVN_REVDATE=%SVN_REVDATE:~7,10%

set VERSION=%VERSION%/r%SVN_REVISION%

:: Init some special variables

set OSR_VERSTR=OSR DDKBUILD.CMD %VERSION% (%SVN_REVDATE%) - OSR, Open Systems Resources, Inc.

set OSR_PREBUILD_SCRIPT=ddkprebld.cmd

set OSR_POSTBUILD_SCRIPT=ddkpostbld.cmd

set OSR_SETENV_SCRIPT=ddkbldenv.cmd

set [email protected] DDKBLD:

set OSR_RANDEXT=%RANDOM%%RANDOM%

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

::  Set error messages

:: Possible codes: 1

set ERR_UnknownBuildType=Unknown type of build. Please recheck parameters.

:: Possible codes: 2

set ERR_NoWdfRoot=WDF_ROOT is not defined, are you using 00.01.5054 or later?

:: Possible codes: 3

set ERR_BaseDirNotSet=To build using type %%OSR_TARGET%% you need to set the %%%%%%BASEDIRVAR%%%%%% environment variable to point to the %%BASEDIROS%% DDK base directory!

:: Possible codes: 4

set ERR_NoBASEDIR=NT4BASE, W2KBASE, WXPBASE, WNETBASE and/or W7BASE environment variable(s) not set. Environment variable(s) must be set by user according to DDK version(s) installed.

:: Possible codes: 5

set ERR_BadMode=^<build type^> must be 'checked', 'free', 'chk' or 'fre' (case-insensitive).

:: Possible codes: 6

set ERR_NoTarget=Target directory must have a SOURCES+MAKEFILE or DIRS file.

:: Possible codes: 7, 8

set ERR_NoDir=The ^<directory^> parameter must be a valid directory.

:: Possible codes: 9

set ERR_SetEnvFailed=The SETENV script failed.

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: Clear the error code variable

set OSR_ERRCODE=0

set PREFAST_BUILD=0

:: Turn on tracing, use %OSR_TRACE% instead of ECHO

if /i "%OSR_DEBUG%" == "on" (set OSR_TRACE=%OSR_ECHO% [TRACE]) else (set OSR_TRACE=rem)

:: Turn on echoing of current line if %OSR_DEBUG% is set to "on"

@echo %OSR_DEBUG%

:: 调用传入参数：

::ddkbuild.cmd -WXP checked . -cZ

::                               %1    %2        %3   %4

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: If the user wants to suppress the header part ... or the info about hook scripts

if /i "%~1" == "/nologo" (shift & set OSR_NOLOGO=1)

if /i "%~1" == "/notquiet" (shift & set OSR_NOTQUIET=1)

:: The next line is *not* a mistake or bug ... it ensures that the order does not matter

if /i "%~1" == "/nologo" (shift & set OSR_NOLOGO=1)

:: Set the target platform variable

set OSR_TARGET=%~1

:: Remove any dashes in the target

if not "%OSR_TARGET%" == "" set OSR_TARGET=%OSR_TARGET:-=%   //执行后结果OSR_TARGET =WXP :: Output version string

@if not DEFINED OSR_NOLOGO echo %OSR_VERSTR%

%OSR_TRACE% ^(Current module: ^"%~f0^"^)

@if not DEFINED OSR_NOLOGO echo.

:: Show help if the target parameter is empty after removal of the dashes

if "%OSR_TARGET%" == "" goto :USAGE

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: In the build directory check for this script and call it if it exists.

:: This allows to override any global system variable setting, if desired.

:: It also checks whether a DIRS/SOURCES file exists ...

if not "%3" == ""  call :GetCustomEnvironment "%~f3"  //Call GetCustomEnvironment 并传入工程位置目录

//call :GetCustomEnvironment "d:\Visual_Studio_2008\Projects\Driver1\Driver1"

//check  目录及文件环境是否OK

if DEFINED HOOK_ABORT goto :END

if %OSR_ERRCODE% neq 0 goto :USAGE

:: Additional error handling for better usability

:: These subroutines will also attempt to locate the requested DDK!!!

set OSR_ERRCODE=3

%OSR_TRACE% Checking whether the environment variable for the build type was set

:: Calling as a subroutine has 2 advantages:

:: 1. the script does not quit if the label was not found

:: 2. we return to the line after the call and can check variables there

call :%OSR_TARGET%Check > NUL 2>&1  //Call WXPCheck

                    :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::                     :: These labels are for compatibility with the respective

:: modes supported by another flavor of DDKBUILD.

:XPCheck

:XP64Check

:XPW2KCheck

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:WXP64Check

:WXPI64Check

:WXPCheck

:WXP2KCheck

set BASEDIROS=Windows XP

set BASEDIRVAR=WXPBASE  //从函数的实现看，我们知道为何要在环境变量中增加

WXPBASE了

:: Other flavor of DDKBUILD

if not DEFINED WXPBASE if DEFINED XPBASE set  BASEDIRVAR=XPBASE

:: Return to caller if the BASEDIR is already defined (either customized or global)

if DEFINED %BASEDIRVAR% goto :CommonCheckNoErrorWithReturn

call :DetectBaseDirTemp "2600.1106 2600"

if DEFINED BASEDIRTEMP if exist "%BASEDIRTEMP%" goto :CommonCheckSetVarWithReturn

goto :CommonCheckErrorNotDetectedWithReturn

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: If the BASEDIROS/BASEDIRVAR variable is not defined, it means the subroutine did not exist!

if not DEFINED BASEDIROS call :ShowErrorMsg 1 "%ERR_UnknownBuildType% (BASEDIROS)" & goto :USAGE

if not DEFINED BASEDIRVAR call :ShowErrorMsg 1 "%ERR_UnknownBuildType% (BASEDIRVAR)" & goto :USAGE

if %OSR_ERRCODE% neq 0 call :ShowErrorMsg %OSR_ERRCODE% "%ERR_BaseDirNotSet%" & goto :USAGE

%OSR_TRACE% BASEDIROS=%BASEDIRVAR% BASEDIRVAR=%BASEDIRVAR% OSR_ERRCODE =%OSR_ERRCODE%

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

set BASEDIR=%%%BASEDIRVAR%%%

call :ResolveVar BASEDIR

call :MakeShort BASEDIR "%BASEDIR%"

:: Check for existing %BASEDIR%

if "%BASEDIR%" == "" call :ShowErrorMsg 4 "%ERR_NoBASEDIR%" & goto :USAGE

set PATH=%BASEDIR%\bin;%PATH%

%OSR_TRACE% Now jump to the initialization of the commandline

:: Calling as a subroutine has 2 advantages:

:: 1. the script does not quit if the label was not found

:: 2. we return to the line after the call and can check variables there

call :%OSR_TARGET%Build    //call  WXPBuild

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:: WXP build for 32bit using WXP DDK

:XPBuild

:WXPBuild

set OSR_CMDLINE="%%BASEDIR%%\bin\setenv.bat" %%BASEDIR%% %%BuildMode%% WXP

goto :EOF

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: //WXP 为我添加，会传入setenv.bat 控制编译XP版本

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: %OSR_TRACE% We returned from the variable initialization

if not DEFINED OSR_CMDLINE call :ShowErrorMsg 1 "%ERR_UnknownBuildType% (OSR_CMDLINE)" & goto :USAGE

%OSR_TRACE% Hurrah, all the variables have been initialized, continuing

:: Proceed with common build steps

goto :CommonBuild

:CommonBuild

:: Remove first command line arg

shift

call :SetMode %1   //设置模式   check  or  free 

if %OSR_ERRCODE% neq 0 call :ShowErrorMsg %OSR_ERRCODE% "%ERR_BadMode%" & goto :USAGE

set OSR_BUILDNAME=%OSR_TARGET% (%BuildMode%) using the %BASEDIROS% DDK and %%%BASEDIRVAR%%%

call :CheckTargets %2

if %OSR_ERRCODE% equ 6 call :ShowErrorMsg %OSR_ERRCODE% "%ERR_NoTarget%" & goto :USAGE

if %OSR_ERRCODE% neq 0 call :ShowErrorMsg %OSR_ERRCODE% "%ERR_NoDir%" & goto :USAGE

:: Resolve any variables in the command line string

call :ResolveVar OSR_CMDLINE

pushd .

set ERRORLEVEL=0

:: This external script prepares the build environment (e.g. setenv.bat)

call %OSR_CMDLINE%   //==》setenv.bat  入口，这里会有控制是编译和那种版本的driver

b. setenv.bat脚本 剖析！ 查看 setenv.bat 脚本的默认设置如下： set _FreeBuild=true

set _IA64bit=false

set _AMD64bit=false

set _BscMake=FALSE

set _RunOacr=TRUE

set _VersionedHeaders=TRUE

set _LatestOsTarget=WIN7

set RAZZLETOOLPATH=%BASEDIR%\Bin

set separate_object_root=FALSE

set DDK_TARGET_OS=Win7

REM This default value will be overridden if one of the legacy

REM build environments is invoked.

set _title=Windows Win7

/ //下面循环会检测传入参数重新设置编译参数 :NextArg

REM

REM Ways to get script usage

REM

if /I "%1"=="/?"     goto usage

if /I "%1"=="-?"     goto usage

if /I "%1"=="\?"     goto usage

if /I "%1"=="-help"  goto usage

if /I "%1"=="/help?" goto usage

REM

REM Valid target architectures

REM (undecoracted '64' implies IA-64)

REM

if /I "%1"=="64"     goto ArgOK

if /I "%1"=="x64"    goto ArgOK

if /I "%1"=="I386"   goto ArgOK

if /I "%1"=="IA64"   goto ArgOK

if /I "%1"=="IA32"   goto ArgOK

if /I "%1"=="x86"    goto ArgOK

if /I "%1"=="x32-64" goto ArgOK

REM

REM Checked or Free builds

REM

if /I "%1"=="f"       goto ArgOK

if /I "%1"=="fre"     goto ArgOK

if /I "%1"=="free"    goto ArgOK

if /I "%1"=="c"       goto ArgOK

if /I "%1"=="chk"     goto ArgOK

if /I "%1"=="CHK"     goto ArgOK

if /I "%1"=="checked" goto ArgOK

REM

REM Valid target operating system versions

REM

if /I "%1"=="Wlh"  goto ArgOK

if /I "%1"=="WNet" goto ArgOK

if /I "%1"=="WXP"  goto ArgOK

if /I "%1"=="WIN7" goto ArgOK

REM

REM Valid subkit build environments

REM

if /I "%1"=="hal" goto ArgOK

REM

REM Final checks

REM

if /I "%1"=="bscmake" goto ArgOK

if /I "%1"=="hdr_ver" goto ArgOK

if /I "%1"=="no_oacr" goto ArgOK

if /I "%1"=="oacr"    goto ArgOK

if /I "%1"=="separate_object_root" goto ArgOK

if /I "%1"=="objs" goto ArgOK

if NOT "%1"=="" goto usage

if "%1" == ""   goto :GetStarted

:ArgOK

if /I "%1"=="64"      set _IA64bit=true

if /I "%1"=="x64"     set _AMD64bit=true

if /I "%1"=="I386"    set _IA32bit=true

if /I "%1"=="IA64"    set _IA64bit=true

if /I "%1"=="IA32"    set _IA32bit=true

if /I "%1"=="x86"     set _IA32bit=true

if /I "%1"=="x32-64"  set _AMD64bit=true

if /I "%1"=="f"       set _FreeBuild=true

if /I "%1"=="fre"     set _FreeBuild=true

if /I "%1"=="free"    set _FreeBuild=true

if /I "%1"=="c"       set _FreeBuild=false

if /I "%1"=="chk"     set _FreeBuild=false

if /I "%1"=="CHK"     set _FreeBuild=false

if /I "%1"=="checked" set _FreeBuild=false

if /I "%1"=="Wlh"     set DDK_TARGET_OS=WinLH

if /I "%1"=="WNet"    set DDK_TARGET_OS=WinNET

if /I "%1"=="WXP"     set DDK_TARGET_OS=WinXP   //假设传入WXP ，则会重新设置DDK_TARGET_OS =WinXP

if /I "%1"=="win7"    set DDK_TARGET_OS=Win7

if /I "%1"=="bscmake" set _BscMake=TRUE

if /I "%1"=="no_oacr" set _RunOacr=False

if /I "%1"=="oacr"    set _RunOacr=TRUE

if /I "%1"=="hdr_ver" set _VersionedHeaders=TRUE

if /I "%1"=="separate_object_root" set separate_object_root=TRUE

if /I "%1"=="objs" set separate_object_root=TRUE

shift

goto :NextArg