mapinfo mif/mid文件格式详解

MapInfo MIF/MID file format description 
(from Appendix A of MapInfo Reference) 
This appendix describes the data interchange format for MapInfo. In this 
appendix, you will find information on: 
MIF File header mif文件头 
MIF Data Section mif 数据区 
Pen, Brush, Symbol, and Font Codes in MIF 画笔，画刷，字体代码 
MID File 
This versatile format allows generic data to be attached to a variety of 
graphical items. It's ASCII, so it is editable, relatively easy to generate, 
and works on all platforms supported by MapInfo. Perhaps the best way to 
understand the MapInfo Interchange Format (MIF) is to study the sample file 
at the end of this appendix in conjunction with the explanation of the file 
format. You can also create samples of your own by exporting files to MIF and 
then examining those files in a text editor. 
Mapinfo data is in two file -- the graphics reside in a .MIF file and textual 
data is contained in a .MID file. The textual data is delimited data, with 
one row per record and either Carriage Return, Carriage Return plus Line Feed, 
or Line Feed between lines. The MIF file has two areas -- the file header are 
and the data section. Information on how to create MapInfo tables is in the 
header; the graphical object definitions are in the data section. 
MIF FILE HEADER 
This is a description of MIF file header with optional information in square 
brackets. 
Version n 
Charset "characterSetName" 
[ DELIMITER "<c>" ] 
[ UNIQUE n,n.. ] 
[ INDEX n,n.. ] 
[ COORDSYS... ] 
[ TRANSFORM... ] 
COLUMNS n 
<name> <type> 
<name> <type> 
… 
… 
DATA 
Version 
The Version clause states whether you are using VERSION 1, VERSION 2, or 
VERSION 300 of the format. Version 300, introduced with Mapinfo 3.0, allows 
multiple-section polyline objects. 
Charset 
The Charset clause specifies which character set was used to create text in 
the table. For example: Specify "WindowsLatin1" to indicate that the file was 
created using the Windows US & Western Europe character set; specify 
"MacRoman" to specify the Macintosh US & Western Europe character set; or 
specify "Neutral" to avoid converting the text into another character set. 
If you are not using one of these character sets, you can determine the 
correct syntax for your character set by exporting a table and examining the 
.MIF file in a text editor. 
Delimiter 
Specify the delimiting character in quotation marks, for example: 
DELIMITER ";" 
The default delimiter is Tab; if you are using the default, you do not need 
the DELIMITER line. 
Unique 
Specify a number. This number refers to a database column; 3 is the third 
column, 7 is the seventh column, and so forth. What happens to column in the 
UNIQUE list is subtle. For example, imagine that you have a database with 
highways in it. Each highway has only one name, but it might be represented 
by several segments. You would put the NAME column in the UNIQUE list, while 
the column containing data for the individual segments would not be in that 
list. This has the effect of creating two related tables; one with names, 
and one with the other attributes of the objects. This is how MapInfo's 
various street maps (StreetInfo) are prepared. 
Index 
To indicate that columns in the table are indexed, include a number (or a 
comma-separated list of numbers) in the Index clause. Each number refers to 
a database column; 3 is the third column, 7 is the seventh column, and so 
forth. Columns in the INDEX list will have indexes prepared for them. 
CoordSys Clause 
Specify the COORDSYS clause to note that the data is not stored in 
longitude/latitude form. When no COORDSYS clause is specified, data is 
assumed to be stored in longitude/latitude forms. All coordinates are stored 
with respect to the northeast quadrant. The coordinates for points in the 
United States have a negative X while coordinates for points in Europe (east 
of Greenwich) have a positive X coordinates for points in the Northern 
hemisphere have a positive Y while coordinates for points in the Southern 
hemisphere have a negative Y. 
Syntax 1: 
CoordSys Earth 
[ Projection type, 
datum, 
unitname 
[,origin_longtitude ] 
[,origin_lattitude ] 
[,standard_parallel_1 
[,standard_parallel_2]] 
[,azimuth ] 
[,scale_factor ] 
[,false_easting ] 
[,false_northing] 
[,range ]] 
[ Bounds (minx,miny) (maxx,maxy) ] 
Syntax 2: 
CoordSys Nonearth 
Units unitname 
Bounds (minx,miny) (maxx,maxy) 
Transform Clause 
When you have MIF files with coordinates stored with respect to the northwest 
quadrant (quadrant 2), you can transform them to northeast quadrant 
(quadrant 1) with a transform clause. 
-------------------------------------------- 
| Quadrant 2: | Quadrant 1: | 
| Nortwest Quadrant | Norteast Quadrant | 
-------------------------------------------- 
| Quadrant 3: | Quadrant 2: | 
| Southwest Quadrant | Southeast Quadrant | 
-------------------------------------------- 
The transofrm clause has the following syntax: 
TRANSFORM Xmultiplier, Ymultiplier, Xdisplacement, Ydisplacement 
To transform quadrant 2 data into quadrant 1 data, use the following 
transform clause: 
TRANSFORM -1,0,0,0 
The zeroes instruct MapInfo to ignore that parameter. 
When you have an application which creates MIF files in quadrant 2, you can: 
Add the TRANSFORM clause to the MIF files 
Change the application so that it creates coordinates in quadrant 1 
Change the application so that it adds a TRANSFORM clause to the MIF 
Files 
Columns 
Specify the number of column. Then, for each column, create a row containing 
the column name, the column type, and, for character and decimal columns, a 
number to indicate the width of the field. Valid column types are: 
char(width) integer (which is 4 bytes) 
smallint (which is 2 bytes, so it can only store numbers between 
-32767 and +32767) decimal (width, decimals) float 
date logical 
This is an example of the columns section of the header: COLUMNS 34 
STATE char (15) 
POPULATION integer 
AREA decimal (8,4) 
For the database specified in this header, the MID file has three columns: 
a 15 character field that represents the STATE column, 
an integer field that represents the POPULATION column, 
an AREA column that consists of a decimal field with up to 8 total 
and 4 character after the decimal. 
MIF DATA SECTION 
The data section of the MIF file follows the header and must be introduced 
with DATA on a single line: 
DATA 
The data section of the MIF file can have any number of graphical primitives, 
one for each graphic object. MapInfo matches up entries in the MIF and MID 
files, associating the first object in the MIF file with the first row in the 
MID file, the second object in the MIF file with the second row in the MID 
file, and so on. 
When there is no graphic object corresponding to a particular row in the MID 
file, a "blank" object (NONE) must be written as a place holder in the 
corresponding place in the MIF file. 
NONE 
The graphical objects that can be specified are: 
point 
line 
polyline 
region 
arc 
text 
rectangle 
rounded rectangle 
ellipse 
A point object takes two parameters; an X coordinate and a Y coordinate. As an 
option, specify the symbol that represents the point. Symbols are designated 
by numbers. If you omit the SYMBOL clause, the current symbol is used. 
POINT x y 
[ SYMBOL (shape, color, size) ] 
MapInfo 4.0 also supports two variations on the SYMBOL clause; see Symbol 
discussion later in this appendix. 
A line object requires four parameters; an X and a Y coordinate for each end 
point. As an option, specify a pen type. When no pen type is specified, 
the current pen type is used. 
LINE x1 y1 x2 y2 
[ PEN (width, pattern, color) ] 
A polyline object consists of one or more sections. If the polyline has more 
than one section, include the MULTIPLE keyword, followed by the number of 
sections. For each section, specify a numpts argument (which indicates the 
number of nodes in that section), followed by an x/y coordinate pair for each 
node. Use the optional PEN clause (described later in this appendix) to 
specify the line style. If you include the optional SMOOTH keyword, the 
polyline is smoothed. 
PLINE [ MULTIPLE numsections ] 
numpts1 
x1 y1 
x2 y2 
… 
… 
[ numpts 2 
x1 y1 
x2 y2 ] 
… 
… 
[ PEN (width, pattern, color) ] 
[ SMOOTH ] 
A region object consists of one or more polygons. Specify the number of 
polygons through the numpolygons argument (immediately after the REGION 
keyword). For each polygon, specify a numpts argument (which indicates the 
number of nodes in that polygon), followed by an x/y coordinate pair for each 
node. Use the optional PEN and BRUSH clauses (described later in this 
appendix) to specify the object's style. Use the optional CENTER clause to 
define the object's centroid explicitly. 
REGION numpolygons 
numpts1 
x1 y1 
x2 y2 
… 
… 
[ numpts 2 
x1 y1 
x2 y2 
… 
… 
[ PEN (width, pattern, color) ] 
[ BRUSH (pattern, forecolor, backcolor) ] 
[ CENTER x y ] 
An arc requires the diagonally opposite corners of its bounding rectangle 
and the beginning (a) and ending (b) angles of the arc in degrees, moving 
counter-clockwise with zero at three o'clock. As an option, specify the arc 
type. (An arc specifies a section of an ellipse, the corners of which are 
determined by the bounding rectangle.) 
ARC x1 y1 x2 y2 
a b 
[ PEN (width, pattern, color) ] 
A text object consists of a text string, up to 255 characters long. To make 
the text string wrap onto multiple lines, insert the characters \n within the 
textstring argument (e.g. "First line \nSecond line \nThird line"). The x1, 
y1, x2, and y2 arguments specify the location of the text on the map. 
Spacing can be 1.0 (single spacing), 1.5, or 2.0 (double spacing). Use the 
Font clause (described later in this chapter) to control the typeface, etc. 
TEXT "textstring" 
x1 y1 x2 y2 
[ FONT... ] 
[ Spacing {1.0 | 1.5 | 2.0} ] 
[ Justify {Left | Center | Right } ] 
[ Angle text_angle ] 
[ Label Line {simple | arrow} x y ] 
A rectangle requires the coordinates of the diagonally opposite corners. As 
an option, specify pen and brush types. 
RECT x1 y1 x2 y2 
[ PEN (width, pattern, color) ] 
[ BRUSH (pattern, forecolor, backcolor) ] 
A rounded rectangle requires the coordinates of the diagonally opposite 
corners and the degree of rounding (a). As an option, specify pen and brush 
types. Degree of rounding is expressed in coordinate units. 
ROUNDRECT x1 y1 x2 y2 
a 
[ PEN (width, pattern, color) ] 
[ BRUSH (pattern, forecolor, backcolor) ] 
An ellipse object requires the coordinates of the diagonally opposite corners 
of its bounding rectangle. As an option, specify pen and brush types. 
ELLIPSE x1 y1 x2 y2 
[ PEN (width, pattern, color) ] 
[BRUSH (pattern, forecolor, backcolor) ] 
PEN STYLES 
The Pen clause specifies the width, pattern, and color of a linear object, 
such as a line, polyline or arc. The Pen clause has the following syntax: 
PEN (width, pattern, color) 
Width is a number from zero to 7. Note: zero-width lines are invisible. 
Color is an integer, representing a 24-bit RGB color value. 
Pattern is an integer from 1 to 77; patter number 1 is invisible. 
Due to a limitness of a text file patterns cannot be shown, however they are 
available in MapInfo Refernce book. More info can be obtained by contacting 
MapInfo. (​​http://www.mapinfo.com​​ on internet) 
BRUSH STYLES 
Brush specifies the pattern, foreground color, and background color of a 
filled object, such as a circle or region. The Brush clause has the following 
syntax: 
BRUSH (pattern, forecolor [, backcolor ] ) 
The forecolor and backcolor arguments are both integers, representing 24-bit 
RGB color values. 
Pattern is a number from 1 to 71. Note: Pattern number 1 is "no fill," and 
pattern number 2 is a solid fill. Pattern numbers 9-11 are reserved. 
Tip: To specify a transparent fill style, use pattern number three or larger, 
and omit the backcolor argument. For example: Brush( 5, 255 ) 
Due to a limitness of a text file patterns cannot be shown, however they are 
available in MapInfo Refernce book. More info can be obtained by contacting 
MapInfo. (​​http://www.mapinfo.com​​ on internet) 
SYMBOL STYLES 
The Symbol clause specifies the appearance of a Point object. There are 
three different forms of the Symbol clause, described below. 
Symbol Clause -- MapInfo 3.0 Syntax 
The Symbol clause specifies the appearance of a Point object. There are 
three different forms of the Symbol clause. To specify a symbol style using 
"Old MapInfo Symbols" (the symbols that were used in earlier version of 
MapInfo), use the following syntax: 
SYMBOL (shape, color, size) 
The shape argument is an integer value, 31 or larger; 31 represents a blank 
symbol (i.e. the object will not be visible). The standard set of symbols 
includes symbols 32 through 67, inclusive, but the user can customize the 
symbol set by using the Symbol application. 
The color argument is an integer representing a 24-bit RGB color value. 
The size argument is an integer from 1 to 48, representing a point size. 
The following table lists the default symbols provided with Mapinfo: 
Due to a limitness of a text file symbols cannot be shown, however they are 
available in MapInfo Refernce book. More info can be obtained by contacting 
MapInfo. (​​http://www.mapinfo.com​​ on internet) 
Symbol Clause -- TrueType Font Syntax 
To specify a symbol style based on a character from a TrueType font, use 
the following syntax: 
SYMBOL (shape, color, size, fontname, fontstyle, rotation) 
The fontstyle argument is an integer that controls settings such as Bold. 
The following table lists the values you can use as fontstyle. 
------------------------------------------------------------------------------ 
fontstyle value Effect on Symbol style 
------------------------------------------------------------------------------ 
0 Plain text 
1 Bold text 
16 Black border around symbol 
32 Drop shadow 
256 White border around symbol 
------------------------------------------------------------------------------ 
To specify two or more style attributes, add the values from the lef column. 
For example, to specify Bold and Drop Shadow, use 33. 
The rotation argument is a floating-point number, representing a rotation 
angle, in degrees. 
Symbol clause - Custom Bitmap File Syntax 
To specify a symbol style based on a character from a TrueType font, use the 
following syntax: 
SYMBOL (filename, color, size, customstyle) 
The filename argument is a text string that identifies a bitmap file (e.g. 
"Arrow.BMP") in the CustSymb directory. 
The customstyle argument is an integer that controls whether color and 
background attributes are used. The following table lists the values 
you can use as customstyle: 
------------------------------------------------------------------------------ 
customstyle value Effect on Symbol style 
------------------------------------------------------------------------------ 
0 Both the Shadow Background setting and the 
Apply Color setting are off; symbol appears 
in default states. White pixels in the bitmap 
appear transparent, allowing whatever is 
behind the symbol to show through. 
1 The Show Background setting is on; white 
pixels in the image are opaque. 
2 The Apply Color setting is on; non-white 
colors in the image are replaced with the 
Symbol's color value. 
3 Both Show Background and Apply Color settings 
are on. 
------------------------------------------------------------------------------ 
FONT STYLES 
The Font clause specifies the appearance (typeface, color, etc.) or text 
objects. The Font clause has the following syntax: 
FONT ("fontname", style, size, forecolor [, backcolor] ) 
Fontname in double quotation marks is the typeface to be displayed. Style is 
the text attribute of the typeface as shown in the following table. Size 
must be 0 in a MIF file, because each text object on a Map is attached to 
the map itself (thus the text size changes as you zoom in or out). Forecolor 
is an integer representing a 24-bit RGB color. The background color is 
optional; if you include it, MapInfo fills the are behind the text with the 
color you specify. 
------------------------------------------------------------------------------ 
style value Effect on Font Appearance 
------------------------------------------------------------------------------ 
0 Plain 1 Bold 
2 Italic 4 Underline 
16 Outline (only supported on the Macintosh) 
32 Shadow 256 Halo 
512 All Caps 1024 Expanded 
------------------------------------------------------------------------------ 
To specify two or more style attributes, add the values from the left column. 
For example, to specify Bold and All Caps, use 513. 
COLORS 
Colors are often defined in relative concentractions of red, green, and blue. 
Each color is a number from 0 to 255, inclusive; the RGB value of a color is 
calculated by the following formula: 
(red * 65536) + (green * 256) + blue 
These are some often used colors and their values: 
Red: 16711680 
Green: 65280 
Blue: 255 
Cuan: 65535 
Magenta: 16711935 
Yellow: 16776960 
Black: 0 
MID FILE 
The MID file contains data, one record of data per row, delimited by the 
character specified in the delimiter statement. The default delimiter is 
Tab. Each row in the MID file is associated with a corresponding object in 
the MIF file; first row with first object, second row with second object. 
If delimiter character is included as part of the data in a field, enclose 
the field in quotation marks. 
The MID file is an optional file. When ther is no MID file, all fields are blank