一：实验环境
| 节点 | OS | IP | SAN_IP | VIP |
| node1 | rhel6.5 | 192.168.10.11 | 172.16.1.1 | 192.168.10.100 |
| node2 | rhel6.5 | 192.168.10.12 | 172.16.1.2 | |
| san | rhel6.5 | 172.16.1.3 |
1.corosync和pacemaker的概念这里就不说了，网上有很多资料注：
2.其中两节点IP地址已按上图设置好
3.已连接好san (映射本地盘符为/dev/sdb)
4.两节点已配置相互ssh信任，并已做了时间同步
二：安装相关软件（节点1和2都安装）
1.安装corosync、pacemaker
[[email protected] ~]# for i in 1 2; do ssh node$i yum -y install corosync* pacemaker* ; done
注：rhel 5 系列corosync、pacemaker下载地址为：
http://clusterlabs.org/ 根据自己的发行版本，下载对应的软件包
2.安装crmsh
到下面地址下载crmsh、pssh、python-pssh
http://crmsh.github.io/
http://download.opensuse.org/repositories/network:/ha-clustering:/Stable/CentOS_CentOS-6/x86_64/
本次下载的各版本为：
crmsh-2.1-1.6.x86_64.rpm
pssh-2.3.1-4.1.x86_64.rpm
python-pssh-2.3.1-4.1.x86_64.rpm
安装：
[[email protected] ~]# for i in 1 2; do ssh node$i yum -y --nogpgcheck localinstall /root/*.rpm; done
3.安装apache
[[email protected] ~]# for i in 1 2; do ssh node$i yum -y install httpd; done
[[email protected] ~]# for i in 1 2; do ssh node$i chkconfig httpd off; done
三：配置corosync
1.[[email protected] ~]# cd /etc/corosync/
2.[[email protected] corosync]# cp corosync.conf.example corosync.conf
3. 完成后的配置文件如下所示：
[[email protected] corosync]# cat corosync.conf
# Please read the corosync.conf.5 manualpage
compatibility: whitetank
totem {
version: 2
secauth: off
threads: 0
interface {
ringnumber: 0
bindnetaddr: 192.168.10.0 //在哪个网段上进行多播，根据实际情况修改
mcastaddr: 226.94.1.1
mcastport: 5405
ttl: 1
}
}
logging {
fileline: off
to_stderr: no
to_logfile: yes
to_syslog: no
logfile: /var/log/cluster/corosync.log //日志所在位置
debug: off
timestamp: on
logger_subsys {
subsys: AMF
debug: off
}
}
amf {
mode: disabled
}
#
# 以下为添加部分
service {
ver: 0
name: pacemaker //启动corosync时，同时启动pacemaker
}
aisexec {
user: root
group: root
}
4.复制配置文件到node2上
[[email protected] corosync]# scp corosync.conf node2:/etc/corosync/
5.启动corosync服务
[[email protected] ~]# /etc/init.d/corosync start
Starting Corosync Cluster Engine(corosync): [ OK ]
[[email protected] ~]# ssh node2 "/etc/init.d/corosync start"
Starting Corosync Cluster Engine(corosync): [ OK ]
6.设置corosync随机启动
[[email protected] ~]# for i in 1 2; do ssh node$i chkconfig corosync on; done
四：集群服务配置
1.查看目前的集群状态
[[email protected] ~]# crm status
Last updated: Tue Jun 23 15:28:58 2015
Last change: Tue Jun 23 15:23:58 2015 via crmd on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
0 Resources configured
Online: [ node1 node2 ]
由以上可知，节点1和2都在线，还未配置任何资源
2.设置集群属性
[[email protected] ~]# crm configure
crm(live)configure# property stonith-enabled=false //禁用stonith设备
crm(live)configure# property no-quorum-policy=ignore //达不到法定票数的策略为忽略
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# show
node node1
node node2
property cib-bootstrap-options: \
dc-version=1.1.10-14.el6-368c726 \
cluster-infrastructure="classic openais (with plugin)" \
expected-quorum-votes=2 \
stonith-enabled=false \
no-quorum-policy=ignore
3.添加文件系统（Filesystem）资源
crm(live)configure# primitive webstore ocf:heartbeat:Filesystem params \
> device=/dev/sdb1 directory=/var/www/html fstype=xfs \
> op start timeout=60 \
> op stop timeout=60
crm(live)configure# verify
先不要提交，接着设置资源wetstore最优先运行在node1节点上
crm(live)configure# location webstore_perfer_node1 webstore 50: node1
crm(live)configure# verify
现在提交
crm(live)configure# commit
返回到上一级，查看目前集群状态
crm(live)configure# cd
crm(live)# status
Last updated: Tue Jun 23 15:55:03 2015
Last change: Tue Jun 23 15:54:14 2015 via cibadmin on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
1 Resources configured
Online: [ node1 node2 ]
webstore (ocf::heartbeat:Filesystem): Started node1
由以上可知，webstore目前运行在node1上
4.添加httpd服务资源并设置httpd服务必须和webstore在一起，webstore必须先启动后，httpd服务才能启动
crm(live)configure# primitive httpd lsb:httpd
crm(live)configure# colocation httpd_with_httpd inf: httpd webstore
crm(live)configure# order webstore_before_httpd Mandatory: webstore:start httpd
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# cd
crm(live)# status
Last updated: Tue Jun 23 15:58:53 2015
Last change: Tue Jun 23 15:58:46 2015 via cibadmin on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
2 Resources configured
Online: [ node1 node2 ]
webstore (ocf::heartbeat:Filesystem): Started node1
httpd (lsb:httpd): Started node1
5.添加虚拟IP资源，并设置虚拟IP必须和httpd服务在一起，httpd服务启动后，才能启动虚拟IP
crm(live)configure# primitive webip ocf:heartbeat:IPaddr params \
> ip=192.168.10.100 nic=eth0
crm(live)configure# colocation webip_with_httpd inf: webip httpd
crm(live)configure# order httpd_before_webip Mandatory: httpd webip
crm(live)configure# verify
crm(live)configure# commit
crm(live)configure# cd
crm(live)# status
Last updated: Tue Jun 23 16:02:03 2015
Last change: Tue Jun 23 16:01:54 2015 via cibadmin on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
3 Resources configured
Online: [ node1 node2 ]
webstore (ocf::heartbeat:Filesystem): Started node1
httpd (lsb:httpd): Started node1
webip (ocf::heartbeat:IPaddr): Started node1
五：高可用测试
1.使node1离线后，查看集群状态
[[email protected] ~]# crm node standby
[[email protected] ~]# crm status
Last updated: Tue Jun 23 16:05:40 2015
Last change: Tue Jun 23 16:05:37 2015 viacrm_attribute on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
3 Resources configured
Node node1: standby
Online: [ node2 ]
webstore (ocf::heartbeat:Filesystem): Started node2
httpd (lsb:httpd): Started node2
webip (ocf::heartbeat:IPaddr): Started node2
由以上可知，资源切换到了node2上
2.使node1重新上线
[[email protected] ~]# crm node online
[[email protected] ~]# crm status
Last updated: Tue Jun 23 16:06:43 2015
Last change: Tue Jun 23 16:06:40 2015 viacrm_attribute on node1
Stack: classic openais (with plugin)
Current DC: node1 - partition with quorum
Version: 1.1.10-14.el6-368c726
2 Nodes configured, 2 expected votes
3 Resources configured
Online: [ node1 node2 ]
webstore (ocf::heartbeat:Filesystem): Started node1
httpd (lsb:httpd): Started node1
webip (ocf::heartbeat:IPaddr): Started node1
由以上可知，资源又回到了node1，这和我们设置的优先运行在node1上相符
至此一个简单的web高可用配置完成