nagios图像（nagiosgraph）（未成）

nagios图像（nagiosgraph）（未成）

<a href="http://cdnetworks-kr-1.dl.sourceforge.net/project/nagiosgraph/nagiosgraph/1.4.4/nagiosgraph-1.4.4.tar.gz">http://cdnetworks-kr-1.dl.sourceforge.net/project/nagiosgraph/nagiosgraph/1.4.4/nagiosgraph-1.4.4.tar.gz</a>

<a href="http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.i386.rpm">http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.i386.rpm</a>

<a href="http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.x86_64.rpm">http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS/perl-rrdtool-1.2.18-1.el5.rf.x86_64.rpm</a>

# rpm -ivh rrdtool-1.2.18-1.el5.rf.i386.rpm

# rpm -ivh perl-rrdtool-1.2.18-1.el5.rf.i386.rpm

#tar zxf nagiosgraph-1.4.4.tar.gz

# cd nagiosgraph-1.4.4

# perl Makefile.PL

# vi install.pl

把所有的www-data改成nobody   （web的用户）

:wq

# make &amp;&amp; make install     

第一个路径改为/usr/local/nagios/nagiosgraph其它直接回车

# cd /usr/local/nagios/nagiosgraph/etc

# cp nagiosgraph-apache.conf /usr/local/apache/conf

# vi /usr/local/apache/conf/httpd.conf

Include conf/nagiosgraph-apache.conf

# service httpd restart

# vi /usr/local/nagios/etc/nagios.cfg

service_perfdata_file=/usr/local/nagios/nagiosgraph/var/perfdata.log

service_perfdata_file_template=$LASTSERVICECHECK$||$HOSTNAME$||$SERVICEDESC$||$SERVICEOUTPUT$||$SERVICEPERFDATA$

service_perfdata_file_mode=a

service_perfdata_file_processing_interval=30

service_perfdata_file_processing_command=process-service-perfdata

process_performance_data=1 (原为0)

# cp cgi/*.cgi    /usr/local/nagios/sbin

# cp bin/insert.pl /usr/local/nagios/libexec

# cp share/nagios/graph.css  /usr/local/nagios/share

# cp share/nagiosgraph.js    /usr/local/nagios/share

# vi /usr/local/nagios/etc/objects/commands.cfg

# 'process-host-perfdata' command definition

define command{

        command_name    process-host-perfdata

        command_line    /usr/local/nagios/libexec/insert.pl

        }

# 'process-service-perfdata' command definition

        command_name    process-service-perfdata

注：要注释掉原有对process-service-perfdata和process-host-perfdata的定义

# vi /usr/local/nagios/etc/objects/yang.cfg

为主机添加小太阳图标

define host {

use       linux-server

host_name    yang

address      192.168.1.10

action_url  /nagiosgraph/cgi-bin/show.cgi?host=$HOSTNAME$

}

为单个服务添加小太阳图标

define service {

use        generic-service

host_name   yang

service_description      check_load

check_command       check_nrpe!check_load

normal_check_interval     2

action_url /nagiosgraph/cgi-bin/show.cgi?host=$HOSTNAME$&amp;srv=$SERVICEDESC$

重启nagios

# service nagios restart

 # ls /usr/local/nagios/nagiosgraph/var/rrd     (看有没有生成nagios中定义的主机名文件)

注：我做的没有生成主机名文件，没有生成图表，原因还在研究中

本文转自linux博客51CTO博客，原文链接http://blog.51cto.com/yangzhiming/860016如需转载请自行联系原作者

yangzhimingg