dpkg-reconfigure tzdata 修改时区
gpm 支持鼠标
service gpm restart
mods-enabled
a2enmod rewrite
a2enmod php5 ssl
a2dismod 关闭
debian5.0添加acl功能
1.debian默认没有安装
下面来安装apt-get install acl
安装之后用fidisk -l
sa:~# fdisk -l
Disk /dev/hdb: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xd274d274
Device Boot Start End Blocks Id System
/dev/hdb1 * 1 4660 37431418+ 83 Linux
/dev/hdb2 4661 4865 1646662+ 5 Extended
/dev/hdb5 4661 4865 1646631 82 Linux swap / Solaris
加载到hadb1 盘下面
mount -o remount,acl /dev/hdb1
setfacl -m g:test:rw data 指行没有报错
------------------------------------------------------------------------------
参照文档如下
Fully patched Kernel version 2.4 or 2.6
Having the ACL utilities
Having a slightly modified version of file utils.
We are going to work with kernel version 2.6 because 2.6 series of kernels makes some attempts to standardise the ACL methods.
<b>Verifying Kernel support for ACL</b>
Checking log files
#cat /boot/config-2.6.15.1-386 | grep _ACL
This should give the below results
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_XFS_POSIX_ACL=y
<b>Install ACL in Debian</b>
#apt-get install acl
<b>Activating ACL support in a partition (Ext3)</b>
By default kernel version 2.6 supports ext2, ext3, jfs, xfs filesystems for ACL
If you have already partition(ex:-hda6) in your hard disk you need to use the following command
#mount -o remount,acl /dev/hda6
Now we need to modify the /etc/fstab file and add the ACL options
/dev/hda6 / ext3 `acl`,defaults,errors=remount-ro 0 1
<b>Adding and Modifying ACL</b>
In Order to use ACL under linux you need to use two commands setfacl and getfacl
Now we will see each one with an example