Cotton leaf removal agent: how to use diphthalonylene

How to use thiphenyl dichloronolone

1. Stir well in the bucket first.

2, the tank first add 1/3 of the amount of water, and then the bucket is stirred evenly into, and then stirred for 5 minutes.

3. Order of pouring:

(1) 54% of the enemy, stir evenly, pour into the tank and stir evenly. 5 minutes.

(2) Auxiliaries, these additives have defoamers, spreading agents, etc., stir well first, pour into the tank and stir again. 5 minutes.

(3) Ethylene, after stirring evenly, pour into the tank and stir evenly. 5 minutes.

(4) Add water, fill up and stir while adding.

Important notice for cotton farmers in Xinjiang

This year, the climate has dropped sharply since September 10th.

Cotton farmers try to finish their first spray of leaf defoliants by September 6.

I hope that cotton planting friends pay more attention to weather changes and hit the leaf drop agent in time.

The lower limit temperature of cotton growth is 13 to 15 degrees, and the biological temperature of cotton is generally located at 13 degrees. Below 13 degrees, cotton does not grow and develop. Therefore, the recommended temperature of the defoliant is the minimum temperature of 12 degrees or more.

At temperatures below 12 degrees, abscisic acid is difficult to form and the defoliation effect is not good. In order not to increase the cost, please take medicine in time.

This article is transferred from the Hui Farming Agricultural Service Platform (hzt18988) and compiled by nongyouyou666.