Because of habit, the limit of dismantling in August, we published in the form of horizontal reviews:
Horizontal review | r5, s1h, and α 7s III fever
And because of the CMG video video contest, our manuscript after August 20th is a bit of a fish, hehe
Dog brother hot review | cmg video video contest, call me God!
But now, we are half-blooded and resurrected, and Brother Dog has decided to go to Tibet for 1 week. The host computer with you has its own special Water Fujifilm gfx100. This time, he and his colleagues will shoot a medium format highland short film with the gfx100. At this critical moment, the camera beta released the Fujifilm gfx100 disassembly of foreign friends lensrentals, and we all just happened to learn it together!
Information | Fujifilm released a firmware upgrade for the GFX system, and atomos turned on the Fujifilm medium format gfx100 4k prores raw recording capability
Giant said | Fuji China strategy and gfx100 in-depth analysis
Single review | Fujifilm gfx100 large format digital camera
At the beginning of the dismantling, we found that this is a returnee machine that has entered the seawater, ha, no wonder it is so generous, after all, we do not have the courage to find a new gfx100 dismantling!
The double-sided adhesive is good and sticks firmly, but it leaves no trace after removal. The following is the peeling stage, when the mood is relaxed and you will feel very refreshed (judging by our experience).
The position of the sub-skin handle is a transparent remote control circuit, which is cleverly hidden.
Many screw surfaces are also covered with cushions, and the details are absolutely finely crafted, and the workmanship throws some road goods a few streets.
Friendly reminder, this is not right to throw the screws, and it will be painful in the later stages, unless he does not want to put it back right away.
After the screws are removed, the back cover can be lifted. It's full of circuit boards.
There are indeed traces of seawater corrosion in the casing, and from the degree of corrosion, this machine should not be "drenched", but "diving" for a while (don't ask the dog brother how to know, his experience with the equipment is something you can't imagine).
Now to remove the circuit board, from this situation, lensrentals should undertake the work of various product renovations, so it will often disassemble these devices. Brother Dog is ready to set up a maintenance center in the image dog, everyone has any small problems with the equipment, can be sent over, we guarantee that the dismantling is complete.
On this corrosion, the back has been cleaned up well, whether it can be saved or not, really depends on the master's craftsmanship. No wonder do not go to the official repair center, this guy to take, in addition to the shell can also be used, other estimates have to be replaced.
Now disassemble the flip screen, in fact, it is relatively simple, pay attention not to pull the line off.
Brother Dog has previously taught himself to weld, and after 2 years of headphone maintenance, he can basically weld such a level.
After dismantling the small pieces, you can get the big ones. Now it's time to dismantle the main body.
The circuit of the top part of the machine is relatively good, although there is also corrosion, but there is no bottom serious, and the master should be able to save some parts.
As can be seen from this figure, the interior of the gfx100 is very complex, and Fujifilm has made a multi-layer architecture for it, and it is fixed using a magnesium alloy skeleton. Its design strength is still very strong.
Such a structure, when disassembling, should be particularly careful, slightly inattentive, and it will be confused when it is reinstalled. Therefore, every step of the video and photography is a must.
Small gaskets are definitely a big trouble when installing, large pieces are easy to remember, and a large number of small pieces are painful to return to the position.
Do a survey, when you remove things and put them back, where do you put the extra screws? Is it not a ride on people who are not prepared and thrown into a vase.
This is the precious 100 million pixel sensor!
Because of the stabilization component, we can see that its structure is still very complex. After dismantling Panasonic s1h last time, I actually had an evil idea, next time we try.
Obviously, foreigners have also tried to do something about the photosensitive chip and the stabilization system.
Seeing that he was not dismantled in a dust-free environment, we were at ease. Our approach is only in line with international standards!
Start disassembling the shutter system.
Go back and continue working on the chip part. Fuji! Not really, this screw, I serve!
Seriously, the delicacy of the Magnesium Alloy Mold of the Japanese has indeed made Brother Dog sigh many times.
Well, the chip is disassembled, and it is compared with other sized chips to make a miracle. Just right, the recent image dog to do the camera format of the feature, it is estimated that the end of the month or next month online, welcome to pay attention!