Decoration if you want to have no main lights and do not overturn the car, these 8 details must not be ignored, each is a pit that the residents have stepped on with crying, must be taken as a warning!
<h1 class="pgc-h-arrow-right" data-track="2" >1, glossy tiles for the floor</h1>
This resident also did not expect, painstakingly made no main lamp, but the floor tiles chose the bright side, at night to turn on the lights, the kitchen top surface is this effect, sparkling.
The location of the corridor is also dazzling, and it is difficult to start if you want to transform, the cost is too large, and you can only make it up.
Therefore, if the home has no main lamp, the floor tiles must not use bright surfaces, including dining tables, coffee tables and other furniture, it is best to use non-reflective matte materials.
<h1 class="pgc-h-arrow-right" data-track="6" >2, the wall is only smooth</h1>
I made a wall wash lamp slot and a wall wash spotlight, and the imaginary effect was like this.
But in fact, it is made, because the wall is uneven, the effect is as follows, and the wall washing is particularly uneven.
This is because the wall only does smooth, that is, we commonly apply the material along the wall, and then scrape and flatten the treatment, the process itself, coupled with the uneven level of the workers, determines that the wall will not be too flat.
In order to achieve the perfect wall washing effect, the wall is best to do punching ribs to level, that is, to use infrared fixed points on the wall, and then along the direction of the fixed point, continue to make several gray ribs with mortar, the purpose is to control the thickness of plastering and flatness.
Only when the wall surface is completely flat, it is not easy to have the effect of mottled walls in the later stage, including when making a door-to-top wardrobe, in order to reduce the error, this process can also be used.
After the punching ribs are leveled, it is best to let the workers finely polish the wall in the state of turning on the lights to ensure that the effect is more perfect.
<h1 class="pgc-h-arrow-right" data-track="16" >3, ignore light functionality</h1>
Many people advocate no main lamp, do not want a ceiling lamp to go to the world, turn around and use several downlights to gather together, in fact, there is still the idea of the main lamp.
The so-called no main light, is to pay attention to the main lighting + auxiliary lighting + key lighting, those several downlights are the main lighting, the atmosphere lamp is auxiliary lighting, and the key lighting, in fact, is functional lighting.
For example, bedside lamps, mirror headlamps, reading lights, cabinets, kitchen light strips, etc., all belong to the category of functional lighting.
And many people ignore the functionality of the light, resulting in blind spots in the home that cannot be illuminated.
For example, under the kitchen cabinet, inside the cabinet, hollowed out in the middle of the shoe cabinet, etc., because there is no light, it is not very easy to use.
To solve these problems, you can consider designing the light strip in the early stage, but the cost is slightly higher, the low-cost method is to buy this ready-made induction light strip in the later stage, directly paste it, open the cabinet, sweep it by hand, automatically light up, and it is very convenient to use.
Moreover, be sure to buy this kind of charging, charging can be used for three or four months, and there are similar light dead ends at home that can be installed.
Hand sweep induction light cabinet light hanging cabinet light kitchen rechargeable USB free wiring LED light with wireless magnetic light strip ¥29 purchase
<h1 class="pgc-h-arrow-right" data-track="24" >4, the light strip is randomly placed into the lamp slot</h1>
When most masters install the light strip, they will throw the lamp strip into the lamp slot at will, and the light that comes out is curved and curved, and there is no beauty to speak of.
When installing at home, you must tell the master to use the light strip card slot (the price on the Internet is very cheap), straighten the light strip and then install it, so that the effect is even and good-looking.
There is also the choice of light strips, do not buy too cheap, otherwise there will be a problem, you can see clearly through the reflection of the ceiling one by one lamp beads, the light strip is not uniform enough.
There is also the choice of large factory products, more than 50 yuan / meter, the effect will be more reliable.
<h1 class="pgc-h-arrow-right" data-track="29" >5, the wall wash spotlight is too close to the wall</h1>
The sumitomo washed the wall spotlights chose to be big names and good quality, thinking that it must be foolproof, but he did not expect that he still stepped on the pit in the installation distance.
The spotlight is too close to the wall, and after opening, there is a local over-bright and glare phenomenon, which is very uncomfortable visually, not to mention the wall washing effect you want.
In order to prevent such phenomena, when decorating at home, the spotlight distance from the wall is controlled at about 30cm, and the wall washing effect is the best.
Also remember to choose anti-glare spotlights, in general, the larger the blackout angle, the better the anti-glare effect.
The resolution method is the distance from the luminous point to the product caliber, about 4-5 cm, the basic shading angle is above 45 °, which can achieve the effect of seeing the light and not seeing the lamp.
<h1 class="pgc-h-arrow-right" data-track="35" >6, the whole house only uses spotlights</h1>
I don't know who fooled me, this resident friend thinks that no main lamp is equivalent to the whole house without the main lamp, all with spotlights instead.
The result is that the brightness in the home is not enough, and it looks messy after turning on the lights, and there is no sense of layering at all.
Spotlights are the key lighting in the home, and the key lighting means that the number must be small, if there is a designer to let you the whole house spotlight, it can really be bye-bye.
In addition to the spotlight, the role of the light strip is also very important, which is the same position with the lamp strip and no lamp strip contrast, the brightness gap is still quite large.
Therefore, the light strip is also one of the important designs that determine the brightness of the home.
Here to say more, the main lamp itself is a complex design, to the points, lines, surfaces of the space to do the overall collocation, to achieve the needs of daily lighting use, by no means with a few spotlights, downlights, light belts can be solved.
Therefore, it is also very important to find a professional and reliable designer.
<h1 class="pgc-h-arrow-right" data-track="43" >7, the color temperature of the whole house is not uniform</h1>
Many sumitomos only pay attention to the design of lamps and locations, ignoring the choice of color temperature, resulting in the same space, the color temperature is not uniform, and the sense of atmosphere is instantly lowered a lot.
Light color unification is the most advanced lighting collocation method, if you can, try to achieve a unified color temperature throughout the house.
In general, the higher the color temperature, the colder the light, the lower the color temperature, the warmer the light, if it is their own collocation, the safer color temperature range is 2700k-4500k, warm can also eliminate the blue light hazard.
Mainly according to their own preferences and needs to choose.
<h1 class="pgc-h-arrow-right" data-track="48" >8, the cabinet is not slotted</h1>
The resident wanted to make a light strip for the cabinet, but did not let the manufacturer slot when customizing, but let the workers slot on the spot in the later stage, and the on-site tools were limited, resulting in uneven groove edges, and the edge sealing was not done well, and once wanted to re-do the cabinet.
Therefore, if you want to make a light strip for the display cabinet, cloakroom, etc., it is best to plan in advance, and let the manufacturer do a good job at one time when customizing the cabinet, eliminating a lot of trouble in the follow-up.