Ultra-wear-resistant micro-bead floor
Coating characteristics
◆ Seamless dustproof, easy to clean ◆ Resistant to general chemical corrosion
◆ Color optional, beautiful and bright ◆ Pressure-resistant, impact-resistant
◆ Good wear resistance, long service life ◆ Fast construction, environmental protection
Place of choice
Non-slip factory workshops, underground garages; food, chemical, hardware, ramps, sidewalks; machinery, shipbuilding, auto repair shops, canteens and kitchens.
Technical specifications
<col>
Pilot projects
unit
index
Adhesion (zoning method)
level
1
Impact resistance
Kg·cm
50
Abrasion resistance (750g/500r)
g
≤0.02
Pencil strength
H
≥7H
compressive strength
MPa
≥80
Tensile strength
≥10
Bending strength
≥15
Drying time
Table stem
h
≤4
Practical
≤24
Resistant to 120# gasoline
7 days
No change
Resistant to 10% sulfuric acid
Resistant to 10% sodium hydroxide
Resistant to 10% saline
All tests (except drying time) are performed (25 °C) after 7 days of curing
Construction procedures and main materials
Construction methods
Auxiliary materials
Reference dosage
Primer layer
Roll coat epoxy primer
Quartz sand
About 0.15Kg/m2
Mortar layer
Blend quartz sand with epoxy medium coating material to the required thickness for construction
0.70Kg/m2 ·m
Putty layer
Use epoxy top coat material to blend quartz powder or double fly powder to scrape the putty layer
Quartz powder or double fly powder
0.15Kg/m2 once
Topcoat layer
Roll or spray ultra-wear-resistant topcoat material
—
0.12-0.13Kg/m2
●Coating thickness: generally 1mm-3mm over 2mm need to be sand
