LEGO 10274 Ghostbusters ECTO-1 Ghostbusters Enjoy visual and sensory pleasures

The ghost hunting car launched this time is from the movie "Ghostbusters : The Afterlife", based on the Cadillac Miller Meteor ambulance, the number of parts is 2352, I started in 1099, and now the price should be lower.

First look at the box photo, the sealing is very simple, the finished picture, look at the comparison with the real car above, the degree of reduction is almost 100%, the back is a play picture, it seems that one side of the seat can be popped, and there is a small ball. Unfortunately, the side of the box was broken, and it seems that there is no need to keep the box.

There were 23 numbered bags, and one unnumbered, which contained some large parts and tires

A thick manual with background introduction and a sticker

Ok, the beginning, and the same as the vehicle spelling, or from the chassis, this vehicle follows the technology of science and technology, a lot of use of technology design, almost consistent with the technology class, such as chassis, steering and so on

Steering function, connected to the steering wheel.

This is a pop-up seat, very clever design, after exit, the seat has a 180-degree rotation, behind the seat is a proton backpack, from the point of view of play, very smooth.

Then there are some technical buildings. From the final effect, the car interior and overall matching are more in line with the original.

Rear and license plates, plus two headlights.

Here is a sunken slope behind the vehicle, controlled by a body sliding pole.

4 doors, 3 activities, the doors are all internal doors, one is a fixed door. The fixed door hides the slide rail.

The hinge adopts a new technology that can effectively prevent the door from opening too large.

The body trim perfectly recreates the ECOT-1's form factor

The front part

The grille part is more unique, made of doll skates, and the effect can be said to be quite good.

Although the engine part does not have the details of the mechanical group, at least it seems that there should be some. Placed in the nose engine compartment.

Next is the car shell part, the overall color is white.

The center console, here use the printed part, otherwise my hand cripple must be directly crooked.

Hood, here you can open to see the engine.

Next up is the upper window.

The roof, where there are more mechanisms, so can not be opened, the detector above the connection to this wheel spindle.

Here is the roof ghost hunting equipment, the equipment is very complete.

The car has neat accessories, including wheels, ladders, headlights, small balls, pipes, etc.

All done after getting in the car, followed by showtime.

Finally, to sum up:

1. Value for money. 1099 into, the current 999, 2000 + particles, at least acceptable, buy early and play early.

2. Degree of reduction. After the completion of the ECOT-1 I think it has reached 100% reduction, pop-up seats, engines, TU antennas, ghost hunting tools, appearance, ladders, rust under the door, small balls, all kinds of movable, various directions, can be very clear and clear to see this is the ghost hunting car.

3. Playability. There is too much play, pop-up seats, antenna rotation, automatic stroke out of small balls, doors, trunks, front hoods are all movable, fiddling around, playing with it.

4. Difficulty. In terms of particle number, it has reached at least 14+ or more, and most of the building methods use the way that only the technology group has, self-feeling, or slightly difficult, of course, as long as it takes a little time, spelling this set is actually no problem.

Personally, I still recommend buying it, even if I have not seen ghostbusters, this shape has reached the standard of the technic.

Finally, why is there no one there?

END