Let's continue with the content of the previous article to talk about the methods and precautions for fishing for grass carp.
<h1 class="pgc-h-arrow-right" > find a fishing position</h1>
So let's start by finding a fishing spot. The first point of looking for a fishing position, try not to choose a fast river section for fishing, because where the water is fast, it is difficult to fish at a fixed point, and it is difficult to float and stand. Therefore, it is also difficult to form dens. However, it is not absolute, if you like to fish with a stuffy rod, you can also try fishing in such waters. However, there are two necessary conditions, one is that the water must have a backwater bay, so that there is a possibility of fish gathering, and the other is that the fish in the water must have a certain density. Another basis for choosing a fishing position is that the fishing spot should have obstacles, which can be rock piles, reeds and so on.
The summary of the fishing position is that in fact, in the Yongjiang River, fishing for the flower carp does not have to be too entangled in the choice of fishing position. As long as it is near the shore, the water depth is about 1 meter, or even fifty or sixty centimeters. Because the carp has some very high density in the Yongjiang River, no matter which section of the river you fish, you will find their traces. The most important thing is that on the first and fifteenth day of the first month of each month, a large number of grass carp will be put into the river. I believe that local anglers should know the reason for this.
Write here to send a little dry goods to the anglers. If you want to pull wildly, the section from The Ximing Bridge (Rowan Bridge) on Jiangnan Avenue to the Sanjin Wharf is definitely a golden fishing spot. Due to government intervention, no release was allowed in the city, so a large number of ships gathered there. As for what it is for, I believe everyone should be able to guess it. However, we still have to remind everyone that the fishing position there is a difficult to find, especially on "special" days, so whether it can be successfully won can only depend on everyone's magic.
<h1 class= "pgc-h-arrow-right" > nesting</h1>
Since the Yongjiang River belongs to the flowing water type fishing area, the general nesting method is very ineffective. Coupled with the frequent passage of boats, any nest material will be washed away by the big waves. Therefore, fishing and seduction is an ideal way. At this time, "bottom dispersion" has become an important means for us to quickly lure fish.
The specific method is to add water to the bait we prepared in advance and stir it evenly, stand still for about 5 minutes, remember not to knead, do not knead into a ball, and keep it loose. The bait-to-water ratio is 1:0.5. Then wrap the bait in lead skin and bring it into the den while we are fishing normally. When you first start fishing, wrap it in the size of an egg, two or three balls. When fishing officially, the bait is rubbed normally under the hook, and the loose cannon is hooked. The scattered cannon is not too big, about three times larger than the rubbing bait. When you first start fishing, you should keep the frequency, two or three minutes a rod. Until we find the signal. When we saw the signal, we changed the hooked shotgun to a lug. After the normal fishing, one loose cannon is added to the hook every 56 rods.
<h1 class="pgc-h-arrow-right" > drift</h1>
I talk about the drifting part in two aspects, one is the situation that the water flow is stable and the water is not very serious, and the other is the situation that the water flow is relatively urgent. When we fish in the Yongjiang River, we first need to prepare a set of double lead wire sets. The double lead line group is simply to install two lead seats on the main line. It should be noted that two space beans should be installed between the two lead-skin seats.
First of all, let's talk about fishing when the flow is relatively urgent. In this case, we need to use a double lead line group. The specific operation is that we have to move the upper lead leather seat to the direction of floating by about 20 centimeters, fix it with two space beans, and keep the lead leather seat below moving. Then pull the space bean above the lead skin seat below by about five centimeters, so that the space bean below has five centimeters of moving space. Then we do the drifting. When floating, you only need to wrap the lead skin on the top of the lead leather seat, and do not have a hook to level the water or Ichimoku. When fishing, the fish hook is attached, and the lead leather seat below is wrapped in lead skin, which weighs about 3 times more than the lead in the upper lead leather seat. This way our drift is done.
Many anglers are curious, do you need to be so troublesome? Wouldn't it be nice to fish for slippery lead directly! In fact, when the water flow is not very urgent, slippery lead does have the effect of resisting water. However, once the water becomes rapid, the float will slowly be brought into the water. I believe that anglers who often fish in the running water should encounter such a situation. The double lead group will not encounter such a problem, and the skeptical angler will try it and know the magic of the double lead group.
In particular, it should be noted that the main line of the double lead line group is preferably not less than 2.0#. Because the weight of double lead is relatively large, it is easy to hurt the main line when we start the pole, so we should try to be as light as possible when starting the pole. In addition, when we adjust the drift, we must remember not to take the hook tone, the specific reasons will not be repeated. If the water flow is particularly urgent, you can use a float with a larger amount of lead, and eat 3.0 grams of lead.
Next, let's talk about the method of water flow stabilization. In the case of no rush, we only need to take out two pieces of lead skin, re-wrap a piece of lead skin for normal adjustment and drifting. You can adjust 5 mesh fishing 3 4 5 6 mesh can be, depending on the fish opening. We can start with a trial fishing of 5 to 3, and if the black drift hit rate is good, we can continue to fish like this. But if there are more empty guns, we have to pull up the drift seat and adjust the 5 mesh fishing 4 mesh. If it is still an empty gun, we will continue to pull up the drift seat, adjust 5 mesh to fish 5 mesh, and even adjust 5 mesh to catch 6 mesh 7 mesh.
This issue of sharing is here, thank you to all the friends who have the patience to read it. I wish you all a wild pull every day and a blast every day. This article only represents a personal point of view, welcome to share and communicate with the majority of anglers.