As the time comes to October 2024, the new phones that will be unveiled and released in the future have started the warm-up of new products one after another. Now, iQOO has also warmed up spoilers for the upcoming iQOO 13 series.
It is reported that iQOO product manager @戈蓝V has recently released a number of new product warm-up information.
Combined with the official warm-up, the new generation of iQOO 13 will be equipped with the latest Snapdragon flagship platform, and bring a very strong performance experience upgrade.
At the same time, the new iQOO 13 will support 100W PPS fast charging, and is expected to support IP68 protection and USB 3.0 wired transmission.
The spoiler also mentions the message that "iQOO 13 uses a higher-level fingerprint solution (the kind everyone expects)". Based on this, it is speculated that it refers to the ultrasonic fingerprinting scheme.
The screen-related spoilers show that the iQOO 13 will be equipped with a 2K straight screen, and the black edge of the screen is extremely narrow, which is almost the limit of the black edge of the 2K screen." At the same time, it is no longer a right-angled middle frame, but a straight-edged large R-angle middle frame.
According to the previous spoilers, this screen will be the first BOE latest light-emitting material, and there will be a comprehensive breakthrough in display effect, eye protection technology, and control experience.
Combined with previous news, iQOO 13 will be the world's first BOE (BOE) latest generation of light-emitting materials, which has good performance in display effect, eye protection technology, outdoor brightness, control experience, etc.
According to reports, BOE's latest generation of light-emitting materials has increased the global peak brightness by 12.5%, the service life by 33%, the power consumption by 10%, and the color bias in extreme temperature environments by more than 50% compared with the previous generation.
According to previous news, the iQOO 13 will only be launched as a standard model, without a Pro version, and the exterior design has not changed much from the previous generation.
At present, this new machine has passed various certifications, and the three certificates are complete. This means that it is getting closer and closer to its official release.
Judging from the existing leaks, the new generation of iQOO 13 will be equipped with the latest Snapdragon flagship platform, with a built-in silicon battery starting with 6 and support for 120W super flash charging.
It is reported that the new Snapdragon 8 Gen4 (it is also revealed that it is called Snapdragon 8 Elite) is designed with a 2+6 architecture, with two super-large cores with a frequency of 4.32GHz and 6 large cores with a frequency of 3.53GHz, which is a huge improvement from the 3.3GHz of the previous generation Snapdragon 8 Gen3.
In the image part, the iQOO 13 uses a 50-million-pixel Sony IMX921 main camera + 50-million-pixel Samsung S5KJN1 ultra-wide-angle + 50-million-pixel Sony IMX826 telephoto lens on the rear, which supports 2x optical zoom.
In comparison, the iQOO 12 main camera uses a 1/1.31-inch OmniVision VCS OV50H sensor, with a 64-million-pixel OV64B periscope telephoto lens, supports 3x optical zoom, and the ultra-wide-angle Samsung S5KJN1 sensor with 50 million pixels.
In terms of other configurations, the iQOO 13 adopts a metal middle frame + glass body, equipped with a single-point ultrasonic under-display fingerprint, a large X-axis linear motor, and IP68 dust and water resistance.
For reference, the iQOO 12 was officially released in November last year, with a price starting at 3999 yuan. It is equipped with a 6.78-inch 1.5K direct screen that supports a maximum refresh rate of 144Hz, a Snapdragon 8 Gen 3 processor, and a self-developed gaming chip Q1. It has a built-in 5000mAh equivalent battery and supports 120W ultra-fast flash charging.