Stainless steel workpiece, machined burr, less residual burr in the inner hole, added to the end of the robotic arm to remove, which tool can be used? RBZ high-speed motor spindle can be used to clamp the Rubik ceramic fiber grinding brush for removal, and the surface effect is good.
Small burrs in the inner hole of stainless steel workpiece, want to remove the surface effect is good, use grinding and can have a little polishing effect of Japan Ruibik ceramic fiber grinding brush, but this grinding brush needs high speed situation processing effect is good, so it can be equipped with RBZ high-speed electric spindle, the speed is up to 20000 rpm / min, the torque is 0.6n.m, the speed is adjustable, you can deburr machining.
Inner hole burr, for different hole diameters, there is a suitable Ruibike ceramic fiber grinding brush matching, equipped with RBZ high-speed electric spindle, you can process, it should be noted that because the grinding brush is spread out in centrifugal force, it needs to be started in the inner hole, back and forth brushing, to play a processing effect.