Industrial-grade network cable sockets are different from common sockets in the home, and they have obvious characteristics. In this issue, we will look at how to choose an industrial-grade network cable socket from the user's point of view.
Network cable sockets, like network cables, whether they are used in home or industrial applications, must understand their own transmission needs. Although many people have used Category 6 or even Category 7 in the household field, the industrial-grade field may not need such a fast transmission speed due to the need for wiring. The following are common standard transfer speeds that we can consider in advance when picking.
Of course, this is also important, especially in the industrial sector, where interference in transmission is unavoidable, and if you use a shielded socket, you can effectively resist noise and the transmission is more stable.
Of course, this is also important, especially in the industrial sector, where interference in transmission is unavoidable, and if you use a shielded socket, you can effectively resist noise and the transmission is more stable.
Waterproof network cable socket, mainly for wet and dusty installation environment.
The small light on the socket can allow the user to judge more clearly whether the line is smooth.
It is suitable for multi-channel network cable connection to ensure that the line can still be stable when the transmission is separated.
M12 Ethernet cables are primarily used in industrial environments and offer a number of industrial-grade advantages.
In professional fields such as medical treatment, antimicrobial network cable sockets can effectively reduce potential risks.
Specially designed for compact corner spaces, it reduces cable bending and brings longer service life.
The network cable contains a large number of cores, which is more complicated to install, and may need to be equipped with related tools. However, since then, there have been many tool-free industrial network cable sockets, as long as you have a preliminary understanding of the core matching standards, you can easily get it.
1. Use a wire stripper or wire stripper specially used to strip the wire 10cm away from the bottom of the network cable in the wall. In the process of stripping, it is necessary to avoid damaging the metal wiring of the network cable.
2. Divide the wire, use the wire cutter to press into the metal card slot of the network cable socket one by one.
3. Cut off the excess lines of the socket and install the wires stripped of the skin on the panel of the 86 box. In order to prevent the network cable from falling, if there is no cable guard card behind the socket, you need to be careful not to pull the network cable socket in the wall and on the socket panel.
The connection of T568A is green-white, green, orange-white, blue, blue-white, orange, brown-white, brown-white, brown.
The connection of T568B is orange-white, orange, green-white, blue, blue-white, green, brown-white, brown-white.
The network cable socket has been used for a long time, and the biggest problem is generally poor contact, how to solve this problem?
There are three possible reasons for the poor contact of the socket of the network cable, one is that the quality of the crystal head is not up to standard; Second, the crystal head of the socket is not plugged in properly; The third is that the crystal head line is not pressed well when connecting.
If the crystal head is not plugged in properly and the socket is not in good contact, this situation is relatively easy to solve, and the crystal head can be wrapped tightly with tape. However, if the quality of the crystal head is not good or the crimping line is not pressed well, you need to take the crystal head again, and the specific operation steps are as follows:
(1) Prepare network cable pliers and several crystal heads, and peel off the outer skin of the network cable with a crimping port;
(2) After peeling off the outer skin of the network cable, straighten the line in the order of white orange, orange, white green, blue, white blue, green, white brown and brown;
(3) Then use the tangent port to cut the line straight, put the straightened line into the corresponding 8 notches in the crystal head, and finally press the crystal head switch.
As for the future development of the network, it will be arranged in advance in many industrial Internet environments. Although optical fiber connection is also the mainstream at present, network cable has an irreplaceable role. How to lay out future network transmission? Category 8 or Class IX industrial network connectors have become an upgrade choice for many industries.