For a long time, in addition to the S series flagship, Samsung's Galaxy Z series mobile phones have also been a product series that many users continue to pay attention to. According to multiple revelations, Samsung is expected to release a product iteration of the Galaxy Z series in July this year.
Now, as the release time approaches, there are more details about this new generation of machines.
According to a report by IT Home today, the Samsung Galaxy Z Flip6 folding screen mobile phone will use thicker ultra-thin glass (UTG), which will be increased from 30 microns to 50 microns, an increase of 66.66%, which can improve the surface hardness of the screen and reduce the crease of the display.
At the same time, the report pointed out that the Samsung Galaxy Z Flip6 will continue to use the hinge design of the previous generation, but Samsung plans to upgrade the hinge mechanism in the Flip7 or later models, and further improve the UTG screen.
According to reports, improving the UTG structure can make the screen bezel thinner while refining the creases.
In addition, the exterior renders and configuration information of the Samsung Galaxy Z Flip6 have also appeared on the Internet before.
Judging from the renderings, the appearance of the Samsung Galaxy Z Flip6 basically continues the design of the previous generation, the overall body is more rounded, and it is still equipped with an inner screen with a hole in the center and an outer screen with an irregular design, and the settings of the dual cameras and the position of the flash have not changed.
In terms of configuration, the Samsung Galaxy Z Flip6 is expected to be offered in two versions with a Qualcomm Snapdragon 8 Gen 3 for Galaxy and an Exynos 2400 chip, with up to 12GB of RAM.
Meanwhile, the Samsung Galaxy Z Flip6's outer screen is expected to have a 120Hz refresh rate. rear 50 million pixel main camera and 12 million pixel secondary camera; Built-in 4000mAh capacity battery.
For reference, the previous generation Samsung Galaxy Z Flip5 comes with a 3.4-inch outer screen and a 6.7-inch main screen with an outer screen resolution of 720 x 748, a peak brightness of 1600 nits, a refresh rate of 60Hz, a main screen resolution of 2640 x 1080, a peak brightness of 1750 nits, and support for 1~120H adaptive refresh rate; The core is powered by the second-generation Snapdragon 8 mobile platform (for Galaxy); The front 10-million-pixel selfie camera, the rear 12-million-pixel wide-angle camera, 12-million-pixel ultra-wide-angle camera, support 10x digital zoom; It has a built-in 3700mAh battery that supports 25W fast charging.
Judging from the existing news, the Samsung Galaxy Z Flip6 basically maintains the design of the previous generation, and is expected to bring upgrades in many aspects such as screen, performance, image, and battery life.
In addition, the Samsung Galaxy Z Fold6 will also be released alongside the Samsung Galaxy Z Flip6.
Blogger @i Bing Universe showed a comparison chart of product sizes in a recent revelation, and said: "Because the outline of the two is about the same, then I compare the Galaxy Z Fold6 and vivo X Fold3 inner screen according to real data, basically, Fold6 is the reduced version of vivo X Fold3, one is 7.6 inches and one is 8.03 inches, and the screen ratio is basically 8:7 up and down." ”
Combined with the data shown in the picture, the new Galaxy Z Fold6 will be equipped with a 7.6-inch inner screen, which is 153.5 mm long and 132.6 mm wide when unfolded. Compared to the vivo X Fold3, the overall size is a bit smaller.
At the same time, judging from the leaked news, the new Galaxy Z Fold6 phone weighs 238g and is 5.6mm thick when unfolded.
In terms of core configuration, the Samsung Galaxy Z Fold6 is expected to be powered by the Qualcomm Snapdragon 8 Gen 3 for Galaxy, with a built-in 4400mAh battery that supports 25W charging.
#热门内容分享#