This content comes from @What's worth buyingAPP, and the views only represent the author's own |Author: Uppercase spaces
This year, the second-hand style is popular again, but it is difficult to choose the key part of the hanging paintings.
How can you choose the right painting with a medieval flavor?
1. Don't choose people with figures, choose geometric figures
The character hanging paintings seem to be high-end but actually very restrained, with carved frames and even a bit traditional and old-fashioned, the whole is more American than pre-existent, and it can't be controlled at all in ordinary people's homes, not relaxed enough, and the more you look at it for a long time, the more awkward it becomes.
It's more suitable for movies or castles.
Therefore, you must choose a geometric picture of the painting, choose this kind of gray and white, beige gray background is covered with color blocks, lines, and black dots.
Although you can't tell what he paints, these abstract geometric contents will bring you unlimited imagination space, and you will have a different feeling when you look at it every few days, which is not only more durable, but also better integrated with the minimalism of the Middle Ages.
2. Don't choose bright colors, but thick earth tones
Bright color blocks are generally used in modern styles, and are mostly used in gray spaces to enhance the atmosphere, which is too easy to cause mood swings. This is completely opposite to the quietness of the medieval style and the quiet of the years.
The medieval style tends to be neutral and warm, such as earth tones, browns, and wood colors, which are durable, simple and quiet.
It is also more suitable to be placed on the dining table, hallway, and living room at home.
3. Don't have too many colors in the picture
Some people buy paintings to be more full and rich, so as to highlight the body of the painting, and feel that the color is too monotonous, and it is not good-looking. It seems to be the same painting with abstract and geometric lines, but when there are many colors, the actual content and style of expression are completely different.
As shown in the picture below, this combination painting seems to be very rich, but there are only black and white, brown and border wood colors, and very few colors make different combinations. What makes the medieval style so fascinating is its simplicity and uncomplicatedness, that is, the restraint of color. There are few colors, but there will also be chiaroscuro, through the contrast between black and white to open up the visual tension, talk about a few moments of high-end. A seemingly simple pattern looks very tasteful.
So it doesn't matter how many colors there are, the important thing is that there are color matching skills in it, not a superficial bluff, and the richness is made in a place you can't see, which is the connotation.
Don't look at the small painting, the effect is great, a suitable painting can increase the level and three-dimensional sense of the wall, and it can show the personal heritage and taste.
According to the above method, a single hanging picture is easy to buy, and the big data will gradually push it to you if you like it.
However, this kind of whole background wall is particularly difficult to find and very expensive, even if there are multiple pieces of the flat side added together, it is not cheap.
It just so happens that I have been learning woodwork, and I have bought a lot of tools, so I want to try to do it myself, thinking that I can save money to buy paintings, and I have also practiced my hands, and the tools are not bought in vain.
essay
Wood DIY Part 1: Repair an 82-year-old boss's stool
Uppercase spaces
02-18
54
In the end, I successfully made this sofa background wall with the waste wood strips and old paper shells that I picked up, and I spent very little money to buy things, which can be regarded as waste utilization, and I think the effect is okay, so I will share the process with everyone.
Make a sofa background wall by hand
Video version → portal
Coarse treatment of wooden strips
There will be a lot of nails in the wooden strips that you pick up, so you have to pry them all off and separate them all first.
If the length of the wooden strip is sufficient, you can also directly saw off the joint, which is more efficient.
Divide similar specifications into categories and wait for the next easy to find.
Choose the desired length and simply sand it to remove dirt and burrs on the surface.
Mark the inward-facing side with nodules, nail holes, and broken ones, and the good, outward-facing sides, and then you can draw the line.
Scribing, cutting 45°, try splicing
Draw a 45° angle so that you can turn around and put it together in a square.
It is also possible to see with a hand saw
It is definitely more efficient and precise with tools, and the oversized miter saw you bought can't be wasted.
Adjust to a 45° angle, and cut it as soon as you saw it
After cutting all the sticks, try to put them together to see if the diagonal lines are the same length. The next step is grooving
Slotting
Because there is an edge trimming machine, I thought of a very efficient way to fix the limit of the trimming machine with two wooden boards sandwiched between wooden strips (only one wooden strip is not easy to fix).
After opening horizontally, swap the wooden strips up and down and open them again. In this way, the depth of both sticks is the same.
The depth of the grooving is also completely sufficient.
fixation
The next step is to clamp and fix the woodworking glue with a clamp, which is to make the wood and glue more tightly combined. This fixture is the first time I bought it, and it's specially used for wooden frames.
There is only one fixture, and there are many frames to be made, so the other frames are clamped with rubber bands. It needs to be glued in advance and then simply fixed with masking paper or tape.
Fix it with a very loose rubber band first, and then tighten it with a tighter one, step by step, from loose to tight.
If you are alone, you can put your feet and knees on the side of the point, so it is not easy to crook.
After 24 hours, the glue can be fixed twice after drying, and the method of drilling + tenon column is relatively simple. Drill out the oblique hole first, and then glue the tenon post and then knock it in.
The second fixation is to implant the bones in the frame, so that even if you fall and knock it, there will be no problem. After another 24 hours, the glue is dry, and the tenon stud can be sawed off for final grinding.
burnish
The last step is very important because it can polish the wood very delicately and smoothly, and it can also polish the texture of the wood.
Before grinding↓
After grinding ↓
Finally, there is the soul-infusing step – wood wax oil.
Apply wood wax oil
After applying wood wax oil, the color and feel of the wood will come out, and the effect is not obvious in comparison.
In addition to the original wood color and white, I painted several of them with white paint.
At this point, the frame part is finished, and the rest is framed.
Mounting
The waste paper shell used for the bottom plate has been piled up for a long time and is too lazy to sell, but this time it finally came in handy, hard enough + flat enough, and it is very suitable to be used as a base plate.
PVC panels had to be bought, in fact, it is not expensive 91*183 cm is only a dozen yuan, 1688 is not very good to hang links.
0.4mm is the minimum standard, the thicker and harder, the better the effect. Remember to ask if it is enough, 99% of businesses have experienced it personally.
Print the core
The image of the core can be found in the image, downloaded and then enlarged in resolution.
Finally, find a store to print, the average piece of art paper is a few dollars, and the store is not Tmall There is no way to hang it.
The bottom plate has to be fixed, still take the lowest cost route, shoe spikes, the early picture frame seems to be used with it, as long as it is not frequently disassembled and assembled, it is completely okay to use it.
In the end, it is the effect of the finished product, and it is quite a sense of accomplishment to do it a little by yourself, if you don't tell you, you shouldn't be able to see that it is made of waste wood strips and paper shells, right?
It's the back of the "HDMI、75 inches" The back panel is a little rougher,,But I can't see it。
Then fix a hanging piece to go on the wall, and the hanging piece is also very cheap, 2 cents a set.
I am still very satisfied with the effect on the wall. After calculating the materials that were really spent on the money, they were evenly distributed to a frame, totaling more than a dozen yuan.
I will also enlarge the resolution, and in the future, any wood and any size frame can be DIY by myself. There are also a lot of walnut, minibus flowers, cherry wood leftovers under the table, and you can also make a hardwood picture frame or something like that.
On May Day, I went back to the old man's yard and the circuits in all the rooms were transformed, and the lucky one was lit up, and I gained a lot of experience during the period. The folding staircase for the upper and lower beds is also assembled and can be used when fixed. These two parts will be updated later.,If you're interested, you can pay attention.,I'm a rare pragmatist in the station rather than a tool to touch the party.,I'll share a lot of experience and methods of really using tools.。 That's all for this article, we'll see you next time~
This article is included in the "Quality Content Incentive Program - Weekly Selection" >>> click to learn more about the program
The author declares that there is no interest in this article, and friends are welcome to communicate rationally and discuss harmoniously~