The die-cast iron workpiece has burrs, and the thickness of about 4-5mm remains, what is the processing plan for removal? Due to the thick thickness of the burr, it is necessary to use a high-torque, high-power RBZ floating spindle to remove, and because the product workpiece is irregular, it is necessary to float to give the spindle buoyancy force to avoid overcutting.
Die-casting iron hardness, matching RBZ floating spindle, diameter 40mm, speed 20000 rpm, adjustable speed, power 1200W, torque up to 1N.M, equipped with RBZ-40 floating, can improve 360° radial floating and 5mm axial floating, installed on the mechanical arm for flexible deburring, its light weight, very suitable for light robots, cost-saving.
RBZ floating spindle, the torque is sufficient, and it is possible to remove about 4mm burrs, which can improve the machining effect. Of course, if you want to realize automatic tool change, you can also equip it with an automatic tool change spindle for deburring processing.