Job information
Resume acceptance
Resume receiving email: [email protected]
Recruitment Brochure
China Electrical Equipment Research Institute Co., Ltd
Class of 2024 Campus Recruitment Guide
Founded in 1958, China Electrical Equipment Research Institute Co., Ltd. (hereinafter referred to as "CETC", stock code "688128") is a subsidiary of China National Machinery Industry Group Co., Ltd., one of the world's top 500 central enterprises.
Focusing on the two major industries of "new energy intelligent vehicles and smart homes", relying on the National Key Laboratory of Environmental Adaptability of Industrial Products, and through the transformation of high-quality scientific research achievements, CETRI has formed four major business areas, including quality technical services, electrical equipment, complete sets of equipment, environmental protection coatings and resins.
Rooted in Guangzhou, with industrial bases and service organizations all over the country, CERI has become a national scientific and technological innovation enterprise supported by common basic technology research, driven by core key technology research and development, and led by technical standard innovation, and occupies a place in the fields of green manufacturing, intelligent manufacturing, 5G communications, medical and health consumer goods, and new energy equipment.
Since 1980, CERI has presided over and participated in the formulation and revision of more than 1,000 international, national, industrial and local standards, and has more than 20 core technologies. It provides high-quality services to more than 10,000 customers in more than 30 countries around the world.
- Recruitment Requirement (Location: Guangzhou)
| serial number | Open positions | specialized | Degree | Job Responsibilities |
| High-end R&D post | ||||
| 1 | Low-carbon cycle Advanced R&D engineer | Smart Manufacturing, Green Design, Mechanical Design, Data Modeling, Recycling, and Materials Science | Ph.D. candidate | 1. Responsible for the basic research on the application of green, low-carbon and recycling technologies; 2. Responsible for the declaration of scientific research projects and achievements; 3. Responsible for the management and implementation of related projects; 4. Responsible for foreign cooperation and exchanges. request 1. Experience in planning, application and implementation of national scientific research projects, funds and achievements is preferred; 2. Have team spirit and good language communication skills |
| 2 | The material is high-grade R&D Engineering | Polymer Materials Science and Engineering, Polymer Chemistry and Physics (Materials), Materials Science and Engineering (Polymer Materials) or Reliability and other related majors | Ph.D. candidate | 1. Responsible for docking the technical needs of the country and the industry, condensing scientific research projects, and carrying out research on the law, mechanism, accelerated test method, and service life prediction technology of material aging; 2. Participate in the research and popularization of natural accelerated test methods and equipment, and participate in technical services such as failure analysis; 3. Responsible for the application of scientific research projects, the preparation of research reports, the summary and declaration of achievements, etc.; 4. Track the development of disciplines and the dynamics of industry technology needs, participate in the planning of scientific research projects, the preparation of scientific and technological development plans, and the analysis of application prospects, and provide support for decision-making. request Solid professional foundation, experience in scientific research project application, able to undertake projects independently, good at research, and love scientific research. Experience in material aging research, national defense scientific research project or familiar with mathematical simulation is preferred. |
| 3 | Senior R&D Engineer of Corrosion & Protection | Corrosion & Protection, Metal Materials, Insulation, Electrical Engineering (Electrical Materials) | Ph.D. candidate | 1. Responsible for the development and implementation of topics related to corrosion protection and environmental adaptability of electrical equipment; 2. Responsible for project declaration, completion and achievement declaration; 3. Participate in the development of corrosion protection products; 4. Responsible for on-site monitoring and evaluation of the environment. request Experience in product development, familiar with corrosion electrochemistry, material testing and analysis of common equipment is preferred, environmental or corrosion simulation research or work experience is preferred. |
| 4 | Advanced R&D engineer (Energy Storage Direction) | Power electronics | Ph.D. candidate | 1. Engaged in research and project management of inverter, power electronic conversion technology, energy storage technology, etc.; 2. Responsible for the design of PCS and other power electronic product topology architecture; 3. Responsible for the selection and strategic planning of key components; 4. Participate in the strategic planning of energy storage products and lead the planning of power electronic products; 5. Experience in high-voltage and high-power product design during the doctoral period; 6. Carry out system design of high-voltage and high-power power electronic devices; 7. Responsible for the system testing of high-power power electronic devices. Request: 1. Familiar with the design of commonly used IGBT, MOSFET and other power devices, users are preferred, and those with experience in SiC converter development are preferred; 2. Familiar with control circuit design, familiar with commonly used DSP (such as F28335, F2812, Freescale, etc.) and commonly used FPGA chips is preferred |
| 5 | Advanced R&D engineer (Charging pile.) Direction) | Power electronics | Ph.D. candidate | 1. Responsible for the design and development of charging pile power supply system to improve the power density and efficiency of existing products; 2. Responsible for the system design and control of major projects 3. Responsible for solving existing major technical problems and problems request 1. Proficient in the basic topology and conventional topology of high-frequency switching power supply 2. Have a solid theoretical foundation related to power electronic control |
| 6 | Senior R&D Engineer of Automotive Thermal Management (Social Recruitment, Shanghai) | Energy & Power Engineering, Refrigeration, Automotive Thermal Management, etc | Ph.D. candidate | 1. Manage the technical team of the thermal management department, cultivate the technical talent team, and build an efficient and stable R&D team; 2. Fully presided over the R&D and technical management of automotive thermal management; 3. Responsible for technical exchanges of major projects and key customers, and provide customers with third-party solutions; 4. Organize the formulation and implementation of major technical decisions and technical programs, formulate technology development strategies, and plan development directions; 5. Analyze test data and provide suggestions for fault analysis, diagnosis, optimization and quality improvement; 6. Complete the modeling and simulation analysis of the thermal system and components, and complete the optimization design in combination with the product; 7. Participate in industry conferences, standard formulation and revision, etc., understand the development direction of the industry, and guide the development of technical routes in the thermal management sector; 8. Responsible for organizing core technology research and tackling key problems, and continuously and rapidly improving core technologies; request 1. More than 3 years of experience in thermal management R&D or system matching of relevant new energy vehicle companies, thermal management systems, compressors or test equipment; 2. Familiar with the development trends, technologies and testing standards of the new energy vehicle thermal management system and parts; 3. Responsible work, in-depth understanding of business, strong execution and high professionalism; 4. Thermal management related resources of mainstream car companies are preferred; |
| Standard testing and certification post | ||||
| 1 | Standard Testing Technical Engineer | Electromagnetics, Biomedical Engineering, Communications, Measurement and Control, Automation, Electronics, Refrigeration, Chemical Engineering, Polymers, Rail Transit, Insulation and Anti-corrosion, Electrical Appliances, Control Theory and Control Engineering | Graduate | 1. Responsible for the research of testing technology in different industries such as smart home, new energy vehicles, medical devices, electronic communications, etc., and be familiar with responding to the requirements of domestic and international standards; 2. Responsible for the research and development and research of new technologies and new fields in the above fields; 3. Responsible for new business from 0-1 under the leadership of the mentor; 4. Facing the industry and market, representatives participate in industry conferences, teams and organizational meetings of this product line; 5. Responsible for customer technical consultation and communication; 6. Responsible for standard formulation under the leadership of the instructor. request CET-6, able to read English standards and English literature independently, have certain English listening and speaking skills and strong communication skills. |
| 2 | Inspection Engineer | Electromagnetics, Biomedical Engineering, Communications, Measurement and Control, Automation, Electronics, Refrigeration, Chemical Engineering, Polymers, | undergraduate | 1. Responsible for the safety and performance testing of smart home, electrical appliances, electromechanical, 5G communication, automobiles, and medical devices, and independently complete the report; 2. Responsible for the technology research and development of the company's product categories in responsibility 1, and write relevant industry standards; 3. The design and preparation of technical specifications of the corresponding technical scheme; 4. Undertake customer technical support, track and learn new technologies and new standards in this field; 5. Participate in the development of new business and other work of the department. request CET-6, able to read English standards and English literature independently, have certain English listening and speaking skills and strong communication skills. Some of them are trained in Jiaxing, Chengdu and Shanghai, and they will be trained at the Guangzhou headquarters for 2-3 years before being dispatched. |
| 3 | Automotive Thermal Management Testing Technology Engineer | Energy & Power Engineering | Graduate | 1. Responsible for the testing of new energy vehicle thermal system parts (compressors, heat exchangers, PTC, etc.), system benches, etc., and standardize the technical operation of inspectors; 2. Responsible for the review of test data and original records, and issue corresponding test reports; 3. Responsible for the equipment management, equipment maintenance and maintenance of the laboratory; 4. Responsible for standard development, method validation and new project development; 5. Assist project engineers and technical experts to complete project evaluation and implementation Request: 1. Familiar with the working principle, structure and technical development of new energy vehicle thermal system parts and systems; 2. Familiar with the testing standards, testing methods and report preparation of new energy vehicle thermal system parts and systems; 3. Familiar with the principle, structure and maintenance of relevant testing equipment; 4. Familiar with ISO, IEC17025 laboratory accreditation criteria and other knowledge; 5. Good English reading and writing skills; |
| 3 | Medical Device Project Engineer | Acoustics, optics | Graduate | 1. Research and track the domestic and foreign standards of ultrasound, phototherapy equipment, and acoustic medical devices, as well as the development of industry technology, formulate and implement new project development plans in a timely manner, and ensure the testing compliance of ultrasound and electroacoustic devices in the laboratory; 2. Implement the electrical safety and performance testing of ultrasound, electroacoustic, and phototherapy medical devices and issue registration inspection reports Request: 1. Familiar with the principle and structure of active medical devices, such as ECG, ultrasound, blood pressure, etc.; 2. Master certain knowledge of electronic circuits and electrical engineering; 3. Good English skills, able to read English literature proficiently, and write English reports; 4. Strong scientific research ability, participation in actual projects is preferred; 5. Good intellectual curiosity, team spirit, and ability to work under pressure. |
| 4 | Intelligent security standard testing engineer | Automation, Electronic Information Engineering, Electronic Information Technology, Communication Engineering, Software Engineering, Internet of Things, Electrical Engineering, etc | Bachelor's degree or above | 1. Responsible for the technical development and business development of the international business of the intelligent security product line; 2. Digestion of international business capacity; 3. Responsible for leading the security product line engineering team of Wenzhou company; 4. Responsible for the docking of business and technology of Wenzhou base; 5. Responsible for the docking of science and technology or government projects. Request: 1. CET-6 or above, and proficient in listening, speaking, reading and writing; 2. Professional scores in the top 30% of the class; 3. Cheerful personality, strong initiative and ability to work under pressure; 4. Responsible, enterprising; 5. First train at the Guangzhou headquarters, and then return to Wenzhou as the technical leader. |
| 5 | Certified Engineer | Electrical and electronics, machinery, automation | Bachelor's degree or above | 1. Study domestic and international standards and regulations for electronic and electrical products, and track the latest policy information and industry development trends; 2. Responsible for the research and implementation of certification projects in the field of electronic and electrical products; 3. Undertake certain certification market development work; 4. Track the latest development of electronic information, enterprise automation and intelligence, improve and update audit and inspection technology, and assist in the development and review of new projects; 5. Assist in the research and development of audit and inspection capacity building with the development of enterprise automation and intelligence; 6. Combined with the development of the company, improve professional skills and qualifications. Request: 1. Master and proficiently use office software, and have good reading and writing skills; 2. Strong learning and comprehension skills; 3. Good English reading and writing skills, CET-6 is preferred; 4. Strong communication and coordination skills; 5. Have a sense of responsibility and have a certain ability to work under pressure. |
| 6 | Failure analysis engineer | Electronics | Bachelor's degree or above | 1. Carry out component failure analysis projects; 2. After training and learning, the failure analysis project can be completed independently; 3. Regularly publish professional and technical articles, related patents, etc. request After the study of professional and systematic microelectronics courses, proficient in reading circuits, component parameters, etc., understanding the basic knowledge of component analysis, eager to learn and self-motivated |
| 7 | Integrated Circuit Engineer | Information Electronics, IC | Graduate | 1. Responsible for the performance technology research of electronic products, components, integrated circuits and other products; 2. Develop high-end certification of electronic products, components, integrated circuits and other products; 3. Study the performance standards of electronic products, parts, integrated circuits and other products, and be responsible for the expansion request 1. Full-time degree, fresh graduates of 211 and 985 colleges and universities; 2. English, CET-4 and above; 3. Have a certain IT theoretical foundation and the working principle of components; 4. Proficient in office and other office software; 5. Strong communication and teamwork skills and independent thinking skills. Have a strong sense of service and are willing to share with the team and users. |
| 8 | Proficiency testing engineer | Electrical automation, precision instruments, measurement and control | Bachelor's degree or above | 1. Plan the proficiency testing plan, formulate the proficiency testing plan, write the work instruction and the article preparation plan; 2. Assist in the uniformity and stability inspection of the goods, and organize the distribution of the goods; 3. Evaluate the ability of participants according to relevant standards and system requirements; 4. Provide explanations and technical advice to participants about proficiency testing activities; 5. Organize the implementation personnel of proficiency testing activities to prepare the results report; 6. Organize the acceptance and issuance of samples and work instructions, and the evaluation of results of the proficiency testing plan (one-to-one) activities organized by the institution. |
| Software development | ||||
| 1 | Software development engineer of new energy equipment | Computer majors such as software engineering, computer science and technology | Bachelor's degree or above | 1. Complete the design and development of software and systems for non-standard electrical automation equipment 2. Complete the joint debugging and testing of the software system of the host computer 3. Complete the compilation of the software debugging report of the host computer 4. Assist team members to move the project forward as planned 5. The software system of the host computer was put into operation on site 6. Provide technical support services for the equipment that has been put into operation Request: 1. Have a good basic knowledge of computer software and have a certain understanding of software engineering; 2. Proficient in C# and other programming languages and related IDE platforms; 3.熟练掌握SQL Server、Oracle、MySQL等常用数据库系统; 4. Familiar with the basic principles of network communication and TCP and IP protocols, and understand the basic knowledge of SOCKET communication, serial port communication, multi-threading, etc.; 5. Familiar with the software development process, have a good programming style, have a good document output ability, have good expression skills and teamwork skills 6. Have a strong sense of responsibility, positive work attitude, good communication skills and team coordination skills; 7. Able to work under pressure and adapt to business trips; |
| 2 | Test equipment software development engineer | Software, computers, automation | Bachelor's degree or above | 1. Complete the development and design of supporting software for household appliances and environmental testing equipment; 2. Carry out the interface work of LIMS laboratory information management system and other data platforms; 3. Laboratory equipment automation control logic development and software implementation; 4. Science and technology project approval and research and development work, patent and software copyright writing and declaration work. Qualifications: 1.接触过ERP\MES\WMS\SCM。 2. Familiar with software system architecture design, familiar with C, C++, JAVA, C#, java script in more than two languages programming, familiar with mobile APP program development |
| 3 | Big Data Analytics Engineer | Computer, Software Engineering, Statistics, Mechanics | Graduate | 1. Based on the data and laboratory R&D service needs, use data analysis technology to establish models and dig deep into the value of data; 2. Development and maintenance of internal data products such as machine learning platforms, crawlers, etc., to support the development needs of business parties and teams. Qualifications: 1. Master's degree or above in computer, statistics, big data analysis and other related majors. 2. Proficient in Python language, solid data structure and algorithm skills, and engineering implementation ability; 3.掌握Hadoop、MapReduce、Hive、Spark等大数据处理工具、框架； 4. Familiar with commonly used machines and deep learning algorithms such as XGB, Naive Bayes, Kmeans, CNN, etc., proficient in using one or more of the deep learning frameworks TensorFlow, Pytorch and Keras, and understanding of cutting-edge material machine learning models and material genome projects is preferred |
| Hardware development | ||||
| 1 | Hardware Engineer | Electrical Engineering, Power Electronics | Graduate | 1. Engaged in the hardware design and development of battery testing equipment 2. Cooperate with the needs of the market department to design the hardware scheme of the product and provide solutions 3. Complete the schematic design, device selection, simulation and component layout according to the scheme 4. Complete the hardware debugging and report writing of the product 5. Provide technical support services for the equipment that has been put into operation 6. Assist team members to advance the project schedule as planned request 1. Have a good foundation in digital and analog circuits, signal analysis and design 2.熟练常用硬件开发设计工具,如:VIEWDRAW、PowerPCB、Multisim、Altium Designer等; 3. Good communication skills, team spirit and sense of responsibility; 4. Have strong problem analysis and solving skills and strong problem summary skills; 5. Able to work under pressure, able to bear hardships and stand hard work. |
| Electrical R&D post | ||||
| 1 | R&D engineer of power electronics | Power electronics | Bachelor's degree or above | 1. Electrical topology simulation, design, and component selection of high-power converters. 2. Debugging, optimization and experimental verification of the equipment. 3. Product pre-sales and after-sales support. request 1. Proficient in analog circuits, digital circuits. 2. Understand various power conversion topologies, and be proficient in the application of related simulation software (MATLAB, Simulink, etc.). 3. Understand the selection and use of IGBT, Mosfet and other power electronic devices. 4. Understand power electronic control technology. 5. Good team communication and collaboration skills. |
| 2 | Electrical Engineer | Electrical Engineering | Bachelor's degree or above | 1. Responsible for the electrical control design and commissioning of the company's electrical equipment, home appliances, automotive environmental test equipment, refrigeration compressor bench, new energy thermal management bench, and participate in the research and development of new products; 2. Responsible for the factory debugging of the company's products; 3. Writing and implementation of automatic control logic for laboratory equipment; 4. Science and technology project approval and research and development work, patent and software copyright writing and declaration work. request 1. Have the professional theory of electrical automation system design and hardware system design foundation, familiar with automation control, electrical control system design and development, equipment communication, Mitsubishi and Siemens and other PLC and HMI programming and control, proficient in CAD electrical drawing and other auxiliary tools. 2. Strong communication and teamwork skills and independent thinking skills. Have a strong sense of service and are willing to share with the team and users. 3. Familiarity with electrical-related design and installation specifications is preferred. 4. CET-4 or above, able to read English standard literature independently, able to meet the needs of work communication. |
| Engineering and technical posts | ||||
| 1 | Mechanical Engineer | Mechanical design, manufacturing and automation | Bachelor's degree or above | 1. Complete the mechanical structure design of non-standard automation equipment; 2. Complete the preparation of design drawings, BOM lists, manufacturing and installation processes, inspection, maintenance and other related documents, 3D design, and 2D drawings; 3. Provide technical guidance for production, assembly and commissioning; 4. Track the operation of the customer's site and deal with the technical problems of feedback in a timely manner; 5. Assist team members to advance the project schedule as planned. Qualifications: 1. Good communication skills, planning skills and execution; 2. Have a good foundation in mechanical theory, and be able to draw engineering drawings proficiently; 3. Proficient in using any 2D and 3D design software (such as SolidWorks, AutoCAD); 4. Have a good team spirit and sense of innovation; 5. Able to adapt to short-term business trips; 6. Experience in the development of lithium battery industry and non-standard automation equipment is preferred |
| 2 | Refrigeration system R&D Engineer | Energy and Environmental Systems Engineering, Thermal Energy and Power Engineering, Energy Engineering and Automation, Energy Power Systems and Automation, Energy and Power, | Graduate | 1. Complete the calculation and design of the refrigeration system; 2. System simulation modeling; 3. Approval and R&D of scientific and technological projects, writing and declaration of patents and software copyrights; 4. Complete the electrical control design and commissioning of the refrigeration system test bench and the automotive thermal management bench; 5. Compilation and implementation of automatic control logic of test bench; 6. Complete the development and design of home appliances, automobiles and environmental test equipment; 7. Complete on-site investigation and commissioning of household appliances, automobiles and environmental test equipment; |
| Equipment research and development | ||||
| 1 | Home appliance machine Electrical Engineer | Mechatronics | Bachelor's degree or above | 1. Design of electrical control system of home appliance special machine, including electrical schematic, PLC and touch screen program programming; 2. Design of electrical control system of three-dimensional warehouse conveying equipment; 3. Selection of materials for the electronic control system and sorting out the list of materials 4. Debugging the electronic control system on site |
| 2 | Appliance manufacturing process engineer | Mechatronics, mechanical | Bachelor's degree or above | 1. Research and design the production process and technology of household appliances; 2. Provide production line, whole plant planning scheme and cost accounting; 3. Cooperate with the marketing company to provide pre-sales technical support; 4. Screening and integrating supplier resources. |
| Chemical R&D | ||||
| 1 | Chemical R&D engineer | Polymers, Analytical Chemistry, Chemical Engineering & Technology | Bachelor's degree or above | 1. Familiar with powder coatings, acrylic resins, and water-based resins. synthetic R&D of epoxy resins and iteration of new products; 2. Familiar with the synthesis operation of resin; 3. Study the influence of process parameters on product performance; 4. Study the relationship between process flow and production efficiency, energy conservation and emission reduction; 5. R&D work such as project implementation and product improvement; 6. Project declaration and project management. |
| 2 | Material Production Management Engineer Location: Dongguan | Polymer materials, chemical industry | Bachelor's degree or above | 1. Daily production management of the operation of the production center; 2. Team building and training in overseas bases; 3. Production technology, quality service. 4. Production scheduling, coordination of personnel work in internal and external departments. 5. Organize the preparation of production procedures and related documents request 1. Bachelor's degree or above from key universities; 2. Solid professional foundation, positive work attitude, good learning ability; 3. Outgoing personality and good communication skills. 4. Strong ability to adapt to life and work under pressure. |
| 3 | Quality inspection management post Location: Wuhan | Polymer materials, chemical industry | Bachelor's degree or above | 1. Responsible for the quality inspection, judgment, monitoring and improvement of powder coating product production. 2. Responsible for the preparation and certification of quality management system process. request Have the corresponding chemical expertise, love powder coating quality inspection work, good at communication. |
| Marketing | ||||
| 1 | Material Marketing engineer | Polymers, Analytical Chemistry, Chemical Engineering and Technology, International Trade, Marketing, English, | undergraduate | 1. Execute and complete the annual sales plan; 2. Maintain good communication with customers, grasp customer needs in real time, maintain old customers and actively develop new customers; 3. Responsible for all basic business dealings related to customers, ensure that business cooperation is safe and controllable, and report and deal with problems in a timely manner; 4. Cooperate with the sales and service department to do a good job in order, delivery, invoicing and collection; 5. Dynamically grasp the market price and changes, provide market analysis and forecast reports to the company on a regular basis, and submit weekly work reports on time. |
| 2 | International Marketing engineer | English, International Trade, Materials, Marketing | undergraduate | 1. Master the basic knowledge of the company's electrical control equipment and intelligent equipment technology, and be able to communicate fluently with customers; 2. Independently translate and produce quotation documents; 3. Responsible for product market research, competitive strategy research and related promotion work. 4. Responsible for the company's brand promotion, exhibition magazine advertising, promotional activities, company website, WeChat public account maintenance, etc. 5. Organize business personnel to participate in product learning and business skills improvement related training. 6. The maintenance of the company's old customers, the development of new customers, and the analysis of sales data. |
| 3 | International Business Project Manager | International Law, Business or Engineering | Bachelor's degree or above | 1. Responsible for the development and management of overseas international business; 2. Business operation of overseas branches; 3. International business development request 1. Good communication and learning skills; 2. International vision and thinking, study abroad experience is preferred, can accept expatriate; 3. Master English and Chinese listening, speaking, reading and writing; |
| Functional management | ||||
| 1 | financial management | Financial Management, Accounting, Tax | Bachelor's degree or above |
|
| 2 | Industry Researcher | Statistics/Information Science/Economics | Bachelor's degree or above | 1. Industrial research and organizational development 2. Participate in special research and consulting projects such as industrial research and park planning, and preside over or participate in the writing of consulting plans; 3. Research and report writing in the field of industrial economy, including industry research, relevant data literature collection, data analysis and processing, chart presentation, and industrial research report writing. 4. Responsible for the collation or writing of the materials required for the declaration (or bidding) and evaluation and reporting of research topics or projects (including project plans, project declaration forms, contracts, report PPT, etc.) 5. Responsible for communicating with customers, understanding customer needs in a timely manner, and providing corresponding solutions. request Strong writing skills, strong information analysis ability, experience in consulting and research projects, mechanical engineering background, and work experience in government departments are preferred |
2. Benefits
Industry competitive salary, generous year-end performance award, settlement in Guangzhou, six insurances and two housing funds, delicious three meals, single dormitory, and trade union benefits
Enjoy complete holidays, 360° solution to food, housing, transportation, employee physical examination, and probationary salary in Guangzhou, and the salary will be adjusted for the best performers
3. Development opportunities
1. Fruitful mentorship training mechanism;
2. Scientific and reasonable step-by-step career promotion channel;
3. "Co-creation, sharing, and sharing" employee stock ownership business development platform.
4. Contact information
Address: No. 204, Xingang West Road, Haizhu District, Guangzhou
Human Resources Department of China Electrical Equipment Research Institute Co., Ltd
Fax: (020)84461729 Recruitment Hotline: (020) 89050831, 89050954
Zip code: 510300 Company website: www.cei1958.com
5. Submit your resume
Recruitment email: [email protected] (preferred)
(E-mail name note: name - major - education - school - position)
Submit your resume online: www.cei1958.com
Reprint: Materials Science Network