The Avenger RGB series memory is the mid-range product of CORSAIR memory, and there are currently two sub-series of Avenger RGB and Avenger RGB SL, of which the SL series is a version that can support divine light synchronization, and the top light bar has 10 built-in lamp beads that can be dynamically controlled, which can be synchronized with the motherboard and create a personal exclusive lighting atmosphere;
The Avenger RGB SL DDR5 memory is available in a variety of specifications, including 6400MHz, 6800MHz and 7200MHz, with a single 16GB and 32GB capacity and a maximum of 64GB (32GB×2), currently only available in the Intel XMP 3.0 version, which can be selected in black or white. This time, we got the black version of the DDR5-6400 32GB (16GB×2) deck, and let's take a look at how this set of Avenger RGB SL memory performs.
Introduction to memory
The packaging of the Corsair Avenger RGB SL is quite simple, packaged in an ordinary cardboard box, and the overall color scheme is the traditional black and yellow color scheme of Corsair, which is quite recognizable. The front of the package has a physical picture of the memory, the lower part is the product name, and the upper left and right corners are the trademark and capacity information; the back is some selling point introduction and manufacturer information, and the memory barcode is hollowed out to make it convenient for users to check the authenticity of the product. After opening the package, the memory module is placed in a blister mold to prevent damage from bumps in transit.
The Avenger RGB SL's cooling vest adopts a pure straight design, but uses a bevel cut treatment at the corners, and the overall look is tough and unassuming. The glossy CORSAIR logo is displayed in the center of the front with the word "VENGEANCE" in white below the logo, framed by a striped silver decorative band. The upper left and right corners of the vest are decorated with a "Y" shaped texture, which is not large, but only slightly embellished, but makes the whole memory look low-key and exquisite.
The design of the back is basically the same as the front, except that there is no silver decorative band, and the basic information of the memory module is pasted in the center, which says that the data transfer rate of this set of memory is 6400MT/s, the timing is CL32-40-40-84, and the working voltage is 1.40V.
After the machine is lit, you can see that the lighting effect of the Avenger RGB SL is quite good, the soft light effect of the light bar on the top is excellent, and the traces of the lamp beads are not visible at all, and the brightness of the lamp beads themselves is also enough, and there will be no dull feeling. The light bar flows naturally in rainbow mode, without obvious color faults, and the appearance is high-end and not cheap. As a Corsair product, this memory naturally supports iCUE software to adjust lighting effects, and also supports third-party lighting control software from major motherboard manufacturers. We tried the MSI motherboard's lighting control software, which can smoothly recognize the memory and adjust the lighting effects, and there are a variety of lighting effects to choose from, so users can easily create the lighting atmosphere they want.
After disassembling the heatsink, you can see the PCB of the Avenger RGB SL DDR5-6400 memory, the surface of the DRAM particles on it has been polished, and the logo and number of the Corsair ship itself are reprinted, and you can see the 2048M8FDFG HYAO1A2351 and other information. It is officially claimed that this memory uses specially selected SK hynix A-Die chips, and the particle brand and CPU-Z test results are consistent.
The lighting control chip and LED are located on the back of the PCB, with 10 RGB LED lamp beads, and the light circuit and the memory circuit are located on both sides of the memory to avoid mutual interference. DDR5 memory transfers the PMIC power supply module to the memory, which used to be the responsibility of the motherboard, but now the memory can manage the voltage by itself, which can provide a better power supply environment, making it work more stable and faster.
Using CPU-Z to identify memory information, the Avenger RGB SL DDR5-6400 memory is compliant with the JEDEC DDR5 specification at 4800MHz and supports Intel XMP 3.0 technology. The timing of DDR5-4800 is CL40-40-40-77 and the corresponding voltage is 1.10V, while the timing of DDR5-6400 is CL32-40-40-84 and the voltage is 1.4V after XMP is enabled.
Overclocking test: over 7600MHz passed stably
The overclocking test was conducted with a Core i5-14600K processor paired with an MSI MEG Z790I Edge WiFi motherboard, which was tested from the memory's default frequency of 4800MHz to its overclocking limit.
In AIDA64, the default frequency of this set of Avenger RGB SL is 4800MHz, the read speed is 71738MB/s, the write speed is 67748MB/s, and the memory latency is 89.0ns; after XMP is enabled, the memory frequency comes to 6400MHz, and the timing is also reduced to CL32, at this time, the read speed is 94884MB/s, and the write speed is 85730MB/ s, the memory latency is reduced to 67.2ns, the memory read speed is 106.09GB/s, the write speed is 95426MB/s, and the memory latency is 61.7ns when overclocked to 7200MHz and CL38 timing, and the memory read speed is 107.55GB/s, the write speed is 97820MB/s, and the memory latency is reduced to 60.3ns, and then to 7600MHz, In the case of timing CL34, the memory read speed is 110.29GB/s, the write speed is 114.28GB/s, and the latency is 55.7ns, and when the timing CL36 is exceeded, the memory read speed is 112.72GB/s, the write speed is 102295MB/s, and the delay is 57.1ns, and finally the memory read speed is 115.42GB/s and the write speed is 102.11GB/ when the timing CL36 is exceeded, and the memory read speed is 115.42GB/s, and the write speed is 102.11GB/ s, with a delay of 55.6ns.
When we try to pull the memory frequency to 7800MHz and 8000MHz, we can enter the system normally and pass the memory test of AIDA64, but when we perform the stability test, an error will appear quickly, even if we repeatedly adjust the timing, voltage and other parameters, we can not pass the test smoothly.
Therefore, we can only carry out stability tests on the combination of 7600MHz and timing CL34, and after making certain adjustments to various parameters such as timing and voltage, this set of memory has successfully passed the stability test, but the memory temperature is higher at this frequency, and if it is installed inside the chassis, you need to pay attention to the air duct to avoid overheating the memory.
Summary: A stable and reliable choice for big names
Overall, this set of Avenger RGB SL DDR5-6400 16GB×2 memory maintains the consistent stable performance of Corsair, from the appearance design to the performance of the big factory. The simple exterior design and matte surface are low-key and versatile without losing the texture, and the black/white versions are enough to meet most theme installations, coupled with excellent lighting performance, which undoubtedly makes it one of the highlights in the case. The overclocking potential of the performance Shanghai Lux A-die chips is good, and the memory like this test can be stably overclocked to 7600MHz, which is enough for most users unless they are extreme overclockers.
The current price of this set of memory on the e-commerce platform is 899 yuan, the pricing belongs to the mainstream level of similar products, and supports a lifetime warranty, if you want to buy a worry-free and stable big-name DDR5 memory, Avenger RGB SL is a good choice.