With the development of science and technology, smart phones have become an important partner in our lives, and the smoothness and durability of the iPhone mobile phone system have always been loved by friends.
Signal problems have always been a headache for iPhone users, sometimes in the same place, other people's mobile phone signal is full, but their own iPhone has only one bar or even no signal. So, what to do with poor iPhone signal?
Xiaobian, today I will teach you 4 methods that may be able to help you, let's take a look at how to deal with it!
Method 1: Adjust the network settings
Sometimes, we can improve the signal quality by adjusting the network settings. First, you can try turning airplane mode on and off, which helps reset your phone's network connection.
Secondly, you can manually select the carrier, go to "Settings" > "Carrier", turn off the "Automatic" option, and then select the corresponding carrier according to the mobile phone card.
In addition, if the network coverage in the area is insufficient, we can try switching to a different network mode or moving to a different location to find a better signal.
Method 2: Reset Network Settings:
How to reset network settings:
In the Settings of your iPhone, go to the "General" option. Select "Reset" and then tap "Reset Network Settings".
In addition, if the network coverage in the area is insufficient, we can try switching to a different network mode or moving to a different location to find a better signal.
Method 3: Use a professional tool to repair
If you still can't solve this problem with the above two methods, you can use third-party tools, especially in the problems of black screen, white screen, stuck, bad signal that occur in upgrade, downgrade, jailbreak, etc., and generally need to solve the problem through iOS system repair.
iOS system repair can be done with the help of third-party tools, such as Tenorshare Niu iPhone Repair Tool (click "Read the original article" to get the tool), which supports fixing 150+ iOS system problems.
How to operate:
Step 1: Download and install the Tenorshare iPhone Repair Tool. Connect the device to the computer via a data cable, click "Fix iOS System Problems", and choose to use the "Standard Repair" mode.
Step 2: Click "Download Firmware", the default download firmware is the latest official version of iOS firmware provided by the system, and the standard repair will start after the download is successful.
Step 3: Repair successfully. Be careful not to disconnect the data cable during the repair process, the whole process will take about 10 minutes, wait for the display "Repair Completed" to re-enter the system to see if the network is back to normal.
Method 4: Contact the carrier
Before contacting your carrier, it is recommended to check your phone's hardware for problems. The phone case or case may block the signal, resulting in a decrease in signal quality. Therefore, it is advisable to try removing the phone case or case to see if the signal improves.
If you still can't solve the signal problem after trying the above methods, then it may be that the carrier's network is faulty.
In this case, it is recommended that you contact the carrier's customer service to find out whether there is any maintenance or upgrade in progress under the current network conditions.
And ask if any other users have reported similar issues. Carrier customer service will provide you with further assistance and advice.
You can call the customer service of the corresponding operator and ask the staff to refresh the network status for you in the background!
In addition, it is also possible to check if the SIM card is installed correctly and is not damaged. If there is a problem with the SIM card, it can also lead to a decrease in signal quality. If it is determined that it is a SIM card problem, it is recommended to contact the carrier in time to replace the SIM card.