China State Construction Xinjiang Construction Engineering Co., Ltd. thoroughly implements the special action of "running an enterprise diligently and thriftily, strictly saving", the headquarters takes the lead in deployment, and units at all levels consolidate their responsibilities to form a longitudinal penetration mechanism of headquarters-business line-project, leading the majority of employees to base themselves on the actual position, deeply rooted in the awareness of diligence and thrift, reducing costs and increasing efficiency, and effectively promoting the high-quality and efficient development of the enterprise.
Open source and reduce expenditure
Water resources, environmental protection and conservation are both correct
01. Water resource recycling technology
In the face of the current situation of increasing shortage of water resources, China Construction Xinjiang Construction Engineering has set up the target goal of "four sections and one environmental protection", reducing costs and increasing efficiency, and a number of new ideas and good ideas have emerged in the front line of the project, and good results have been achieved in promoting water resources to be open source and reduce flow, soft treatment and reuse.
Water recycling system
Water recycling system
02. Water-saving maintenance technology
The project actively adopts the curing form of covering the film, which not only ensures the quality of curing, saves manpower, but also saves a lot of curing water; the project uses the tie bolt to fix the PVC pipe on the outer wall, and the pipe body uses an electric drill to open a hole with a spacing of 200mm, and realizes automatic spray maintenance after connecting with the water supply pipe, and switches regularly according to the curing time, and the spraying stops when the wall surface is wet, which effectively saves the maintenance water.
Film curing
Automatic spray curing
Turn trash into treasure
There are many ways to recycle and process old materials
03. Steel pipe short head reuse technology
In view of the problem that the short head of the steel pipe can not be used again in the process of steel pipe turnover and use, the project cut it into two fixed-length sizes of 270mm and 370mm, and used the mechanical cold extrusion compression head to process and make the steel pipe joint, which is fast and convenient for the socket lap joint, which can be widely used on the formwork support frame of various construction projects, and realizes the reuse of material processing.
The short end of the steel pipe is made into a pipe joint
Socket lap joints
04. Waste square pipe reuse technology
In view of the problems of discarding waste square pipe materials and waste of standardized enclosure of the project, the project uses the standardized upper channel of waste square pipe welding, which not only exercises the standardized welding technology of workers, but also enables waste materials to be reused.
Welding of waste square tubes
Reuse of waste square pipes
05. Construction waste into treasure technology
Waste steel pipes, plastic pipe short joints, waste steel bars and formwork scraps are recycled and made into construction tools such as material baskets and welding rod carrying barrels, turning construction waste into treasure, and at the same time facilitating the use of construction personnel.
Homemade material baskets
Homemade welding rod carrying bucket
Optimize your process
Inventing more efficiently with one stone
06. Aluminum mold electromechanical reserved pre-embedding technology
The project designs a complete set of mechanical and electrical reserved embedded construction technology in the aluminum mold system by carrying out research and research, and the device has the characteristics of portable installation, no repetitive positioning, no opening, which effectively solves the technical problems of the traditional reserved embedded method in the aluminum template system, greatly improves the turnover times and service life of the aluminum template, and reduces the project cost.
Aluminum mold electromechanical reserved embedded device
The electromechanical reservation in the aluminum mold system is pre-embedded
07. BIM pipeline optimization technology
In view of the problems of large volume of mechanical and electrical pipelines, many cross collisions, and complex statistical pipe fittings in the Jiangmen Junyi Mansion project, the joint installation branch of the technology center used BIM technology to optimize the basement pipeline and solve the difficulties such as insufficient clear height of the lane according to relevant regulations and specifications. Using the detailed list function of BIM, the project counts the engineering quantity before and after the optimization of each professional pipeline, and checks and compares it with the calculated data of the Ministry of Commerce, which greatly saves material costs.
BIM pipeline optimization
08. Comprehensive bracket installation optimization technology
In the process of installing the comprehensive bracket, it can be compatible with the water, electricity and heating system to ensure that the product is a standardized semi-finished product, so that the model identification is clear, and the management specification is coordinated, and the waste and loss of materials and accessories will be minimized, with good versatility.
Standardization of comprehensive stents