1. Processor comparison - Redmi is slightly superior
In terms of performance three-piece set, the "LPDDR5X+UFS4.0" memory combination is completely identical, so the performance configuration of the two is actually the difference in processor. Wang Teng said that it cost an extra 200 million yuan to use Snapdragon 8s Gen3, and it depends on where the money goes.
In terms of performance alone, the Snapdragon 8s Gen3 on Redmi's side, whether it is CPU or GPU, is a single-digit increase compared to the Snapdragon 7+ Gen3 of OnePlus Ace3V, which obviously does not highlight its advantages.
As for energy efficiency, the CPU part is slightly stronger, while the GPU part is almost the same, it seems that the title of "flagship 8 series" is a bit big! If you look at the comprehensive performance of CPU and GPU, Snapdragon 8s Gen3 has no obvious advantages.
So behind its special naming, there are other hidden flagship-level feature advantages. For example, it has the same AI computing power as the Snapdragon 8 Gen3, and supports AON, the front camera can achieve real-time intelligent perception throughout the day, thus supporting gesture operations.
This real-time intelligent sensing is similar to the intelligent gesture function adopted by Huawei since the Mate30 Pro, and the wake-up method is almost the same and is a low-power solution, but it has expanded more corresponding functions in gesture recognition.
In addition, in terms of baseband, the Snapdragon 8s Gen3 uses the same X70 baseband as the Snapdragon 8 Gen2 - the maximum download speed is 19% higher than the X63 baseband of the Snapdragon 7+ Gen3, and its GPU hardware-level ray tracing function is also the same as the Snapdragon 8 Gen2.
2. Screen comparison - each has its own merits
The main parameters of OnePlus's screen are: 1.5K resolution, 120Hz refresh rate, 10bit color depth, global maximum brightness 1100nit, local peak brightness 2150nit, high brightness DC+ low brightness 2160Hz high-frequency PWM dimming, wet hand touch.
The main parameters of Redmi's screen are: 1.5K resolution, 120Hz refresh rate, 12bit color depth, local peak brightness 2400nit, high brightness like DC+ low brightness 1920Hz high-frequency PWM dimming.
In general, there is not much difference between the screen parameters of the two,It's just that OnePlus focuses on IP65 dustproof and waterproof (can prevent water spray) Humidification hand touch features,While Redmi here focuses on higher color accuracy and higher color depth of the primary color screen features。
3. Other contrasts - each with its own characteristics
In terms of rear images, the main camera sensors of the two are exactly the same, both are Sony LYT-600, but OnePlus still uses the old naming convention called IMX882. In addition, the Redmi has a larger aperture here, and the main camera gets 28% more light, so it is slightly better.
In terms of battery life, OnePlus's "5500mAh + 100W fast charging" combination is better than Redmi's "5000mAh + 90W fast charging" combination, OnePlus's other advantageous hardware includes: dual-frequency GPS + three-frequency Beidou, IP65 dustproof and waterproof, three-stage switch, glass back cover.
In terms of heat dissipation, OnePlus's "nearly 10,000-level VC" has the advantage of heat dissipation area, while Redmi's annular cold pump has the structural advantage of gas-liquid separation, which is considered to be equal. Although Redmi did an experiment at the press conference to prove that its annular cold pump is more advantageous, it still has reservations.
4. Price comparison
Both are "12+256" configurations for sale, OnePlus is 1999 yuan, and the "12+512" configuration is also 2299 yuan, but the price of Redmi is 100 yuan cheaper on the "16+512" configuration!
In the end, Redmi also has an additional 1TB top configuration, and the first sale also gives a broken screen insurance and Bluetooth headphones!This set of "combination punches" down, OnePlus Ace3V can be said to have no power to fight back.
END