Text|Very
Edit|Very
Before reading this article, please see the hard work of the officials and gentlemen, so that you can find better content, thank you for your support!!
In our lives, we often encounter some "stupid designs" that make people complain, which can be called anti-human, but on the contrary, these items with "stupid designs" are often necessities in our lives.
This not only makes people angry, but they don't understand what the designer's original intention was in designing this item.
But in fact, if you use it, you will suddenly find that it is not that these designs are "stupid", but that you do not understand the usage, so you have wronged the designer.
For example, when we understand the correct usage of the following items, we will completely understand: It turns out that the clown is actually me!
Utility knife design
I don't know if anyone has ever wondered why the blades of these utility knives look like they are segmented and not strong at all.
But in fact, this is deliberately done by the designer, and there is a big doorway in it.
Except for art students, most people use art knives, most of which are used to dismantle couriers and cut things, and their role is not very large.
Therefore, ordinary people will not conduct a deep study of the utility knife, but if you use it clearly, you will find out how "considerate" this section of the blade is.
The reason why the manufacturer designs the blade into a section is actually for the sake of the user, after all, the blade is very thin, if it is used too many times, then the blade will be very dull, and the use experience will be greatly reduced.
At this time, most people will choose to lose the blade and replace it with a new one.
But in fact, there is another method, and that is to break off the blunt blade, yes, just break it off!
The reason why the blade is made into sections is to prevent people from breaking the blade, which is easier, and even the designer has made a very intimate design at the tail of the art knife in order to prevent people from accidentally cutting themselves when breaking the blade.
That is the "knife artifact", a very insignificant design.
The tail of the art knife can be removed, and at the end of the art, there is a small opening designed to insert the blade, so that not only will it not hurt the hand, but also when the blade is broken, it will be very easy and labor-saving.
A little knowledge, when breaking the blade, remember to break the back of the gap, so that it is very easy to break, but also very neat, if you break in the same direction of the gap, there is a high probability that the blade will be broken, or the break is not neat.
Double disc spiral mosquito coil
The double-disc spiral mosquito coil is still a must-have item for every household until now.
However, many people encounter a very serious problem when using mosquito coils, that is, mosquito coils are too fragile and easy to break, but the double-disc spiral mosquito coils are too tight and difficult to separate.
If the force used is greater, it is easy to break, which is very "anti-human" and gives many people a headache.
Many people have resigned themselves to fate, and the first moment they get the mosquito coil, they will put it flat into the air and let the mosquito coil come into a "free fall".
If you are lucky and have enough strength, the mosquito coil can be separated intact, and if you are unlucky, it will be a "broken bones" end.
But in fact, everyone misunderstands the designer, when they designed mosquito coils, they actually thought about any emergencies and took precautions.
In fact, the double coil spiral mosquito coil is very easy to separate, first press the mosquito coil head slightly with your fingers to separate it, and then slowly pick it open, but the strength must be gentle.
Of course, don't worry if it's broken, there is actually a small hole in the buckle, and the broken mosquito coil can be inserted into the small hole to fix it, so that the broken mosquito coil can burn without worrying about it falling off.
Rice bags
Rice and flour are indispensable foods.
However, after buying rice, many people have encountered a very troublesome problem, that is, the mouth of the rice bag or noodle bag is very difficult to open.
Because most of the cotton thread is used for old-fashioned drawstring sealing, this sealing method has a very strong practicability, as well as sealing, which can effectively avoid moisture in the food.
However, there are many people who don't know how to untie it, so they can only cut it one by one with scissors, which is time-consuming and laborious, and very inconvenient.
(Source: Tomato Moon)
In fact, this sealing method is very easy to solve, and there is even a mantra on the Internet, that is, "one line towards me, from right to left".
At the closure of the bag, a careful person will notice that the number of ropes on both sides of the bag is not the same, one side has only one rope, while the other side will have two together, which looks very thick.
In fact, this is specially designed by the designer.
When disassembling the bag, it is important to turn the side of the single wire towards you and then use scissors to cut the connection between the double and single lines on the back, as many people cut the wrong position and do not pull it apart.
Then, cut the connection on the other side, pull the single wire on the right side by hand, and as soon as you force it, the bag mouth will be disassembled, and there is no need to cut one wire at all.
This design concept is very powerful, both practical and airtight, but many people do not know how to use it correctly.
Fixation line for socks
With the improvement of the quality of life, the variety of socks is gradually enriched.
But the headache for buyers is that every time they get a new sock, it is very difficult to disassemble, because most of today's socks are used in thread winding.
The key is that this kind of thread is still similar to the material of cotton thread, and even individual businesses use fishing line materials, which do not dare to pull hard at all, for fear of tearing the socks, so they can only obediently find scissors and cut them off, which is very "unfriendly".
Therefore, many people have complained about the "sealing design" of socks, and think that the designer is too stupid and does not consider the feelings of the buyer.
But in fact, people who can't disassemble it can only say that they haven't found the right way.
Careful people will find that in the position of the cotton thread at the closure of the socks, there is actually a very thin and short "little tail", as long as it is pulled, the label will be broken and removed, there is no operation at all, simple and practical.
It can be said that this time, the designer was completely wronged, and he could only blame himself for not finding the real way to use it.
In addition to the above items, there are actually many items that we think are inconvenient, but in fact, we have not mastered the correct way to use them.
For example, if a can is very difficult to unscrew, you don't actually need to pat the bottom, you only need to slightly tap the four corners left at the cap to make the center of the cap bulge, and then it can be easily opened.
Or to put it more simply, use a hard object and gently tap the lid, and if you hear a pop, the lid will be easily unscrewed, of course, this method requires some skill.
Epilogue:
Although there are many designs that are inconvenient because people do not understand how to use them, there is a good saying that when a design is not known to the public, then it is not a good design.