I believe everyone has found such a situation, that is, more and more people no longer choose to install floor heating, but change back to installing radiators.
In the past, every household was equipped with radiators, but later floor heating became popular, and many people began to install floor heating. Now that they have all changed to warm up the gas sheets, why is this?
According to the analysis of industry insiders, there are mainly the following reasons.
The first aspect is the reason for the cost of installation.
We all know that it is very convenient to install radiators, so we installed two pipes into the house, one for the water inlet and one for the water outlet. Then install the radiators.
The radiator is installed on the wall, and the water pipe is installed at one end and the water pipe is installed at the other end. Saving trouble is saving money, why do you say that?
First of all, radiators are cheaper than installing underfloor heating. Not only is the material cost cheap, but the installation cost is also cheap, and the most expensive thing now is the labor cost. If the radiator is installed, the two workers will finish their work in the morning.
If you want to install floor heating, you must first smash the ground, do insulation, do waterproofing, and lay anti-heat paper. Install the extruded plastic board, coil the floor heating pipes, and then plaster the plaster, inlay the tiles, and make beautiful sewing......
Toss for at least half a month. How much does it cost? If the effect is similar, who wants to bother?
So the question is, are radiators and floor heating the same?
Some people say that floor heating is hotter than radiators, but in fact, it is not that floor heating is hotter than radiators. It's because there are more pipes for floor heating and fewer pieces for radiators.
If you add a few more sets of radiators, you can't stay in the house if you can still get hot, so you have to open the window and open the door.
Some people say that the ground is hot, and you can walk back and forth on the ground barefoot.
I wondered, you're not a primitive, why do you have to walk back and forth barefoot?
Who didn't grow up barefoot in the countryside at our age?
Barefoot has no temptation for us at all, and we can only deceive those who have not lived barefoot.
Some people say that underfloor heating can sleep directly on the ground, but in fact, it doesn't cost much to buy a bed. Don't pick and search.
Besides, I don't have a problem with the disc in my waist, I like to sleep on a soft bed, the softer the better, and it's best to sink me in, the kind that can't climb out. How hard is it to sleep on the ground? I don't sleep on the ground, and then Xiaoqiang crawls into my ears.
What else is there?
The second aspect is the daily maintenance reason.
The radiator is very easy to take care of on a daily basis. Whether the leak is leaking or not, whether it is blocked or not, all of them are clear at a glance. And if it leaks, after it is blocked, it can be done with a wrench.
Floor heating is not good, if the floor heating is not hot or leaking, you must find professional personnel to check and repair.
If the floor heating pipe is leaking, it cannot be replaced, and it can only be replaced with a new one. You have to smash all the tiles, cut the floor, and pull everything out underneath. Then put on the new floor heating pipes, then plastered with plaster, and then inlaid with tiles, and this toss passed for half a month. It's only been three months since I was heating in winter, and I don't know why I'm so happy.
Let's talk about blocking the pipe, if the floor heating pipe is blocked, you must find a professional to dredge it. Even if it's not blocked, it should be cleaned every year. It's troublesome, don't talk about delaying the effort, you don't have to spend money? Who will dredge and clean you for nothing?
Let's popularize it again, why do floor heating pipes always have to be blocked?
Because the pressure of the heating water is not enough. As a result, sediment, slag, rust, sludge and other messes in the heating water will settle in your underfloor heating pipes.
This is the same as a person's blood vessels, more and more blocked, more and more blocked, and finally completely blocked.
So why is the pressure of the heating water not enough?
Whether it is the joint of the pipeline, or the valve, all the connected places, if the pressure is high, it will definitely leak.
If it leaks, the workers have to fix it. Who wants to go out to work in the winter?
In order to keep the pipes from leaking and not breaking. Therefore, try to keep the pressure as low as possible. Control to a minimum. Water can flow on it.
In this way, the sediment in the pipes is not easy to be washed away, and will settle in the floor heating pipes, accumulating more and more. Therefore, the floor heating pipes will often be clogged. Got it?
It is for these reasons that many people have now changed the floor heating back to radiators.
Do you want to go, if the floor heating is good, why do you want to change the heater to the people who spend money and trouble to install the floor heating?
Floor heating must have its problems, there are its problems, and finally the user can't bear it, and he gets tired of it, so he changes it back.
So there are some things, don't rush the fashion, practicality is the most important, otherwise you have to find trouble after spending money.
Everybody's busy right now, who has the kung fu to tinker with this stuff all the time!
Do you think this is the truth?
Welcome to comment and leave a message.