- Before reading this article, I sincerely invite you to click "Follow", which is convenient for you to discuss and share, and brings you a different sense of participation, thank you for your support.
The lithography machine sounds like some kind of mysterious device that can portray light, but it is not actually used to portray light.
The lithography machine is actually a very important device used in the process of manufacturing integrated circuits (ICs).
Simply put, a lithography machine is like a giant camera that projects tiny circuit patterns onto silicon chips to create tiny electronic components.
Of course, this projection does not shine directly on the silicon wafer with light, but goes through a series of highly sophisticated steps.
In other words, the release of the Huawei Mate 60 series can be described as an uproar, which amazed the world.
What is especially curious is that even if the mainland does not have ASML's EUV lithography machine, Huawei can still manufacture high-precision Kirin 9000S chips, which really makes the American bigwigs scratch their heads!
They have disassembled and analyzed the Kirin 9000S chip, but in the end they still failed to understand how Huawei achieved such a powerful 7nm chip manufacturing.
In fact, Huawei's technical strength is not a joke. As far as I know, Huawei's R&D team is like a super team, and everyone is a top master of Internet technology.
They can be described as omnipotent in promoting the development of domestic chip technology.
In terms of chip manufacturing, Huawei adopts a proud independent research and development technology, that is, the combination of basic chip technology and micro-processing technology.
First of all, Huawei adopts an advanced basic chip process, which is like laying the foundation when building a building.
Then, Huawei added special techniques for microfabrication, which was like adding a brick wall to the building.
Through precise process control and clever design, Huawei can achieve higher chip density and more accurate circuit layout, which greatly improves the performance of chips.
Don't look at this as a simple combination technology, but in fact, there is the wisdom and hard work of countless scientists behind it.
Huawei's R&D team is a pioneer in the field of chip manufacturing.
They are always brave enough to try new things and tirelessly explore the boundaries of technology, just like intrepid explorers.
They are never satisfied with the status quo, bravely break through the bottleneck of technology, and constantly challenge their limits, which is what Huawei is today.
It is precisely because of Huawei's outstanding performance in technology that the world has been shocked.
Both the United States and other countries have been amazed by Huawei's achievements.
Huawei's Kirin 9000S chip of the Mate 60 series is undoubtedly another proof of Huawei's strength, and also sets a new benchmark for the mainland in the field of chip manufacturing.
As early as two years ago, the Japanese side began to develop a scheme to replace the lithography machine, which is a very important technological progress.
Previously, Canon Company really gave everyone a big surprise!
They announced the launch of a super bombshell - chip production equipment!
These devices are so powerful that they can make 5-nanometer chips with advanced technology!
It's like putting a super stylish, super advanced chip "new dress" on our electronics.
Biden's mood may really be a little panicked.
The United States has always relied on chip blockade barriers to protect its technological advantages, but this time it looks like some problems may occur.
Even the Japanese side may restrict exports of this equipment, which will further hinder the development of semiconductor technology in our country.
Compared with lithography machines, Canon's nanoimprint technology is much less difficult to replicate.
This means that even if other countries regulate the export of equipment, our semiconductor technology still has the potential to achieve breakthroughs through Canon's nanoimprint technology.
Biden, what a delicate situation.
However, I think our scientific and technological development in China will never stop at any barriers.
Perhaps this situation can give us an opportunity to inspire more innovation and push our semiconductor technology out of its own way.
Canon actually shows us a fast path to solving our chip puzzles.
The nanoimprint technology they proposed can almost be said to be a genesis technology, and its importance has only been widely recognized and valued in recent years.
Do you know that perhaps we have long been secretly conducting research and exploration of nanoimprint technology, but we have not disclosed it to the outside world. After all, this is a technology with great potential and prospects!
Now is the time for us in China to show our strength and seize the opportunity.
We have the largest manufacturing industry in the world, with many scientists and engineers, and strong R&D capabilities.
If we can keep up with Canon and even surpass them, then we have the potential to become a leader in the chip field.
Don't you think this is a once-in-a-lifetime opportunity?
Let us work together to promote the development of nanoimprint technology and once again demonstrate China's innovative talent in this field.
I believe that as long as we have the courage to explore and innovate, China will be able to become the most influential chip manufacturing country in the world!
What do you have to say about this? Welcome to leave your opinion in the comment area!