Today brings ROG Z790 HERO+ Dragon King III + Enjie H7 Flow installation display. The chassis is from Enjie NZXT H7 Flow, which is a high-volume ATX mid-tower chassis, a total of black, white and black and white three colors optional (this show black model), the shape is square and simple, angular, the front panel and top plate of the chassis are designed with ventilation mesh, the mesh is larger and more conducive to ventilation and heat dissipation, and the internal standard dust-proof net does not have to worry too much about dust, and each panel is snap-on quick release design, easy to disassemble and maintain. Case size: 480 x 230 x 505mm, net weight: 10.05kg, very solid workmanship. The interior is spacious, the motherboard can be installed from ITX-ATX, tower air cooling up to 185mm, graphics card up to 413mm, power supply up to 200mm, front panel and top can be installed 360mm radiator, while supporting up to 7 fan mounting, front panel can be installed 3 x 120/140mm, top can be mounted 2 x 140mm/ 3 x 120mm, rear can also be mounted 1 x 120/140mm fan, excellent heat dissipation, support 2 x 3.5, 4 2.5-inch hard drive storage space, while a reasonable cable management system on the back makes cable organization easy.
IN TERMS OF HARDWARE, THE LATEST 13TH GENERATION PLATFORM IS ADOPTED, AND THE MOTHERBOARD CHOOSES THE ASUS PLAYER NATION ROG MAXIMUS Z790 HERO WITH 20+1 POWER SUPPLY MODULE (90A), WHICH CAN EASILY COPE WITH THE 13TH GENERATION I7/I9 PROCESSOR; The graphics card uses the ROG STRIX Raptor RTX 4080 O16G Gaming with an 18+3-phase super-alloy digital power supply scheme, and the distinctive red and blue gradient color scheme is very technological cyberpunk; The heat dissipation comes from the ROG RYUJIN III Ryujin III 360, and the built-in eighth generation Asetek water pump uses a three-phase motor to provide higher flow and lower noise for enhanced heat dissipation. The water block is equipped with a 60-frame 3.5-inch LCD display, and the water-cooled display can be customized through ASUS's official ARMOURY CRATE software, supporting the latest Intel 1700/AM5. In addition, 3 ROG 120mm magnetic daisy-chain ARGB fans are connected, and the fans are seamlessly connected to the magnetic connectors, connecting the fans and transmitting control signals and power supply. Only 1 cable is required for 3 fans; The power supply comes from ROG Thor 1000W Platinum II Platinum II Platinum full module, with PCIe5.0 cable, and the built-in power consumption screen makes the power consumption of the whole machine clear at a glance;
Memory uses Kingston Fury Rebel DDR5 RGB 6400 32GB kit, supporting Intel & AMD dual platforms; SSD from Western Digital WD_BLACK SN850X 1TB, the latest 112-layer BiCS5 flash memory particles, sequential read speed of 7300MB/s, preload technology, load balancing technology for gamers; The fan comes from Limin TL-B14B Extrem and adopts the dynamic balance dispensing 2.0 process to achieve XYZ three-dimensional dynamic balance correction. The frame is triangular symmetrical, increasing the effective air outlet area by 23% and increasing the compressive strength of the structure by 20%. Well, so much for the introduction, let's enter the installation link.
Hardware configuration checklist:
CPU: Intel i7-13700K
MOTHERBOARD: ASUS ROG MAXIMUS Z790 HERO
Graphics: Asus Gamer Nation, ASUS ROG STRIX, Raptor RTX 4080, O16G Gaming
Power supply: Asus Gamer Father ASUS ROG Thor 1000W Platinum II Thor II
HEAT DISSIPATION: ASUS PLAYER NATION ASUS ROG RYUJIN III DRAGON GOD III 360 ARGB
Memory: Kingston Fury Renegade Renegade DDR5 RGB 6400 32GB (16Gx2)
SSD: Western Digital WD_BLACK SN850X 1TB
Fan: Limin Thermalright TL-B14B Extrem x 4
Chassis: ENJIE NZXT H7 Flow Black
First, the whole machine display.
The whole machine is in black tone, and the blue-purple RGB lighting effect (R42, G0, B86) is embellished.
The front adopts a lightless fan that does not destroy the visual integrity of the mesh board. The following is an angle of the chassis.
Host motherboard side display.
The back is a thick sheet of steel, snap-on tool-free disassembly.
Open the chassis backplane and show the cable management on the back.
The front panel of the chassis is designed with ventilation meshes. The larger mesh is more conducive to ventilation and heat dissipation, and the internal standard dust screen does not have to worry too much about dust.
The NZXT logo located below the front panel of the chassis.
The front panel is tool-free snap removal design, and when the panel is removed, you can see that 3 Limin TL-B14B Extrem air intakes are installed on the front. The fan adopts the dynamic balance dispensing 2.0 process to achieve XYZ three-dimensional dynamic balance correction. The frame is triangular symmetrical, increasing the effective air outlet area by 23% and increasing the compressive strength of the structure by 20%.
The top panel of the chassis is also designed with ventilation mesh and built-in dust screen.
The front interface part, from right to left, is: power switch (with white ARGB lighting effect), USB 3.2 Gen1 Type-A x 2, USB 3.2 Gen2 Type-C x 1, 3.5mm audio interface x 1.
Open the tempered glass side panel on the left side of the chassis to see the hardware inside.
ROG RYUJIN III Ryujin III 360 cold head light effect. The built-in 8th generation Asetek water pump features a three-phase motor that provides higher flow and lower noise, enhanced heat dissipation performance, and a larger size base to provide higher thermal efficiency for the next generation of Intel and AMD processors. The water block is equipped with a 3.5-inch LCD display with a resolution of 320 x 240, 32MB of storage space is twice that of the previous generation, and the screen frame rate has been upgraded to 60 frames from the previous generation.
PLAYERS CAN CUSTOMIZE THE WATER-COOLED DISPLAY THROUGH ASUS' OFFICIAL ARMOURY CRATE SOFTWARE, SUCH AS CUSTOM ANIMATION/WALLPAPER, ROTATING THE DISPLAY SCREEN, ETC., AND CAN ALSO MONITOR THE FREQUENCY, VOLTAGE, TEMPERATURE, FAN SPEED AND WATER FLOW IN REAL TIME.
The cold head adopts a cubic design style, size: 89 x 91 x 101mm, the surface material is aluminum alloy, black anodized and the edges are rounded. The built-in fan draws in cold air to cool the motherboard VRM, which can reduce the motherboard VRM temperature by up to approximately 35°C.
PLAYERS CAN CUSTOMIZE THE WATER-COOLED DISPLAY THROUGH ASUS'S OFFICIAL ARMOURY CRATE SOFTWARE, SUCH AS CUSTOM ANIMATION/WALLPAPER, CLOCK, ROTATING DISPLAY SCREEN, ETC.
The top ROG RYUJIN III Ryujin III 360 radiator is paired with 3 3 ROG 120mm magnetic daisy-chain ARGB fan lighting effect display. The fan and the magnetic connector are seamlessly connected to connect the fan and transmit control signals and power supply. Only 1 cable is required for 3 fans.
The middle of the side of the cold row is inscribed with the twill font ROG Logo. The fan side also has ROG Loser's Eye decorative stripes.
ROG MAXIMUS Z790 HERO Power I/O Heat Dissipation Armor Single-sided Mirror + LED Dot Matrix Light Effect. Add Polymo dynamic lighting effects, you can present 2 patterns at the same time, can present ROG/HERO patterns, and support dynamic effects, changing colorful personality patterns.
Kingston Fury Renegade Renegade DDR5 RGB 6400 32GB (16Gx2) light effects.
Kingston Infrared Sync Technology technology, combined with FURY CTRL software, can bring more personalized lighting performance.
ROG STRIX RTX 4080 O16G Gaming Raptor graphics card side lighting.
THE GEFORCE RTX LOGO ON THE LEFT.
On the right is the REPUBLIC OF GAMERS LOGO lighting effect, and the transparent acrylic on the right is a ring light strip, and it has ARGB lighting effect.
Transparent acrylic ring light strip light on the right.
The OG Strix RTX 4080 O16G Raptor graphics card features a metal integrated backplane, a new thermal module design for the entire card, a fully enveloping cooling panel, backplane and die-cast metal frame. ADC 10 high-hardness aluminum alloy material with better mechanical properties is used, which greatly enhances the ability of the graphics card to carry deformation.
The tail cutout design runs through ventilation to reduce tail weight and prevent sagging, while taking into account the heat dissipation duct.
The Loser's Eye logo logo on the lower left heatsink of the ROG MAXIMUS Z790 HERO motherboard.
NZXT logo identification located on the side of the chassis power supply/hard drive bay.
Front panel 3 Limin TL-B14B Extrem auxiliary air intake.
The rear end is also fitted with 1 Limin TL-B14B Extrem exhaust.
The built-in cable management channels, reasonable cable management positions, Velcro and ample space make cable organization easier. Chassis front I/O cable, motherboard 24Pin, CPU dual 8Pin module cable management situation.
CPU dual 8Pin module cable management situation.
Huge cutouts on the back of the motherboard make it easy to mount the heatsink backplane, and there are two 2.5" hard drive mounting bays below to expand storage.
ROG Thor 1000W Platinum II Raytheon 2nd Generation Platinum power supply. 80 PLUS Platinum certified and Cybenetics Lambda A++ noise level certified (noise < 20 dB), combined with custom heatsinks and Axial-Tech fans, its PWM intelligent speed control has a quiet acoustic signature. The power supply can withstand fanless heat dissipation with a 500W load, and the fan runs at 12%-15% speed under a 700W load.
Side lighting and power display display. Built-in OLED display, loading animation at boot time, real-time display of load wattage, voltage and other information. The ROG logo and twill on the right are ARGB design, and the motherboard (5V RGB interface) is connected to the motherboard through a separate signal line to support ARGB light effect customization and AURA divine light synchronization control.
Mesh ventilation mesh above the rear of the chassis, I/O interface on the back of the motherboard on the left side below, 120/140mm fan outlet hole on the right, 1 Limin TL-B14B Extrem auxiliary exhaust is installed.
Below is the graphics card connector and the bottom power connector.
Second, the accessories are unpacked.
THE MOTHERBOARD CHOSE THE ASUS PLAYER NATION ROG MAXIMUS Z790 HERO.
Accessories are extensive: Wi-Fi antenna, ROG Hyper M.2 CARD, M.2 thermal sticker, 4 SATA cables, 1 Q CONNECTOR (chassis cable hub), USB pendrive (driver and documentation included), M.2 screws and studs and pads, RGB/ARGB extension cable, ROG VIP card, a VRM fan bracket and a memory fan bracket.
The ROG MAXIMUS Z790 HERO also comes with a ROG Hyper M.2 CARD expansion card in a single-slot design made of two thick aluminum alloys throughout, providing two additional M.2 hard drive slots, one of which supports PCIe 5.0. The metal armor is very thick and pre-applied with thermal conductive stickers to provide low temperature guarantee for the stable operation of SSDs.
Asus Gamer Nation, ASUS ROG MAXIMUS Z790 HERO continues the appearance of the Z690 HERO, the motherboard adopts the latest Z790 platform design, equipped with 20+1 power module (90A), equipped with dual ProCoolII. high-intensity power interface, easy to control the 13th generation Core i9 flagship processor.
The motherboard I/O and VRM power supply heat sink is very thick and has made a large area of twill cutout, the use of heat pipe to connect the upper and left heat sink, and the use of high heat transfer coefficient of thermal conductivity to press the inductor and power supply module, and the back plate to assist passive heat dissipation, increase the heat dissipation area, improve the heat dissipation capacity, ensure the motherboard power supply low temperature efficient operation.
The ROG MAXIMUS Z790 HERO offers four memory slots supporting up to 128GB DDR5 7800Mhz, and comes standard with debug debug light, independent power on and off and restart keys in the upper right corner for bare board overclocking. The motherboard is still equipped with the graphics card quick release button PCI-E SLOT Q-RELEASE, which can be quickly removed with just one key press, which is very convenient. Next to it is a front USB 3.2GEN 2X2 20Gbps Type-C interface, and an additional PCI-E 6-Pin connection power supply allows the interface to output up to 60W of charging power.
Power supply I/O heat dissipation armor single-sided mirror + LED dot matrix design, add Polymo dynamic lighting effects, can present 2 patterns at the same time, can present ROG/HERO two patterns, and support dynamic effects, can change the colorful personality pattern. THE UPPER LEFT CORNER ALSO HAS THE SILVER MAXIMUS HERO LETTERING.
The motherboard CPU is powered by a dual 8Pin design, and the 8+8-PIN PROCOOL II ensures stable power input and low temperatures.
The whole body under the motherboard is covered with a large area of thick heat dissipation armor, and the appearance of the PCH heatsink is composed of silver and black stripes composed of ROG Eye of Faith, no ARGB lighting effect, and I personally prefer such a metallic matte design. Both PCIe 5.0 x 16 expansion slots have metal protective covers on the surface to strengthen the interface and avoid signal interference, as well as a PCIe 4.0x16 slot underneath. The first PCIE X 16 supports up to PCI-E 5.0 X16, the second PCIE X 16 supports up to PCI-E 5.0 X 8 (above 2 shared CPUs PCI-E 5.0 X16, providing a combination of X16/X0 or X8/X8), and the bottom PCIE x16 is actually PCI-E 4.0 X8 lanes, which is convenient to support dual PCI-E 4.0 X4 M.2 SSDs on ROG HYPER M.2 CARD.
Remove the heavy heat sink, you can see that the motherboard provides 3 M.2 data interfaces, all pre-pasted with thermal stickers, all support M.2 Q-LATCH quick release design, two of which support PCIe4.0x4, the other supports PCIe4.0x4&SATA mode, and the top is a direct CPU.
ASUS'S OWN SUPREMEFX DESIGN INCLUDES 1 REALTEKALC 4082 CODEC, AN EXTERNAL ESSS ES9218PQQUAD DC CHIP, AND MULTIPLE SOUND CONDENSERS TO PROVIDE REALISTIC GAME SOUND AND A BEAUTIFUL LISTENING EXPERIENCE.
Equipped with 6 SATA6 storage ports.
The interfaces are very rich, from top to bottom: 1 x BIOS FLASHBACK button, 1x CMOS button, 1 x HDMI 2.1 port, 4 x USB 3.2 Gen 1 5Gbps Type-A interface, 2 x Thunderbolt 4 Type-C 40Gbps interface, 5 x USB 3.2 Gen 2 10Gbps Type-A interface, 1 x 2.5 Gbps wired network port, 1 x USB 3.2 Gen 2 10Gbps Type-C interface, 2 x Wi-Fi 6E wireless antenna interface, 5 x3.5mm audio source hole, 1xOptical S/PDIF output audio source hole.
The back of the motherboard is a full metal back panel, which is the first time that a HERO motherboard has enjoyed such treatment, with a central twill geometric pattern and dark pattern, and a huge loser's eye logo design in the lower right corner.
The graphics card is also from Asus Gamer Nation, ASUS ROG STRIX RTX 4080 O16G Gaming Raptor.
Accessories include an instruction manual, an assemblable ASUS thank you card, a guide to using the bracket and power cable, and a ROG product collection card.
Comes with a 16Pin to 3x8Pin adapter, a Velcro with ROG logo, and a graphics card stand.
Let's look at the graphics card itself. The graphics card is rectangular, measuring 357.6 x 149.3 x 70.1mm, and the exterior design incorporates a large number of cyberpunk worldview elements, and the surface is made of dark gray aluminum alloy with a characteristic red and blue gradient color scheme. In terms of specifications, the ROG Strix RTX 4080 O16G Raptor graphics card adopts RTX 4080 cores, has 9728 CUDA cores, supports PCIe4.0, and the video memory is the latest 16GB GDDR6X, and the memory frequency is 22.4Gbps. Benefiting from the solid heat dissipation material of the graphics card, the default frequency of the graphics card reaches 2625Mhz, and the acceleration frequency is 2655MHz, which is much higher than the frequency of the public version (the public version is 2510MHz)
Three large, newly upgraded Axial-tech 7-fan dual-ball axial fans on the front of the graphics card provide 23% more airflow through the graphics card than the previous generation, resulting in lower temperature and noise and higher performance. Supports reverse rotation and 0dB technology to accurately direct airflow, and the fans on both sides rotate in the opposite direction to the central fan to reduce air turbulence inside the cooling module and increase the air volume through the radiator. At the same time, there is an intelligent fan stop mode, when the GPU temperature drops below 50°C, the three fans will stop running, so you can play games that do not require high performance in a quiet environment, or perform light work. When the temperature exceeds 55°C, the fan starts again and refers to a speed curve that balances performance and noise for work or play.
In the upper left corner, there is a totemic ROG faith logo.
The red and blue "Loser's Eye" logo on the right runs through the fan, which is very designed.
The whole card has a thickness of 3.5 slots, the side of the graphics card can see the central hollow design, the internal dense heat dissipation fins, the core adopts the vapor chamber direct contact and heat pipe embedded design, built-in four 8mm and three 6mm heat pipes, the vapor chamber has a milled groove, so that the heat pipe is embedded without being flattened, so that the heat source is more effectively transmitted to the fins. This powerful combination reduces GPU temperature by up to 5°C when subjected to 500W thermal load compared to traditional thermal plate and heat pipe combinations. With more space and fins, the massive cooling system is optimized for the airflow of three axial fans, efficiently conducts heat from the GeForce RTX 4080 GPU, and is efficiently dissipated by three axial fans.
ON THE LEFT SIDE OF THE SIDE IS THE GEFORCE RTX LOGO.
In the center of the side is the new 12VHPWR power supply interface, supporting PCI-E5.0 specification, a single port up to 600W, using 18+3 superalloy digital power supply scheme, the GPU part uses MP2888A controller chip + TDA21570 (70A) MOSFET, and the memory part uses UP9529QQKF+SIC6389 (50A) power supply scheme. Digital power control with high-current power supply module and 15K capacitors delivers powerful performance. The interface features power sensing and high-speed circuitry to continuously monitor the input power of the power supply and use convenient LEDs to indicate voltage regulation and power line connection problems.
The bottom right side of the graphics card is the REPUBLIC OF GAMERS LOGO lettering, and the transparent acrylic on the right is a ring light strip, and it has ARGB lighting effects.
The ring light strip at the tail turns on the divine light synchronization light effect and the light effect is cool.
The ROG Strix RTX 4080 O16G Raptor is equipped with a metal integrated backplane. The whole card adopts a new heat dissipation module design, equipped with a fully enclosed heat dissipation panel, backplane and die-cast metal frame, and uses ADC 10 high-hardness aluminum alloy material with better mechanical properties, which greatly enhances the ability of the graphics card to carry deformation.
The left twill cut texture on the left side of the graphics card backplane, the GEFORCE RTX logo in the upper left corner, and the ROG totem text logo in the center.
The left side of the backplane has convenient dual BIOS switches.
Axial fans can be quickly selected between "High Performance" and "Silent" speed profiles.
The rear twill grille of the graphics card is cut-out, and the tail cutout design runs through ventilation to reduce the weight of the tail and prevent sagging, while taking into account the heat dissipation air duct. It's also engraved with the ROG logo, and each of the constituent stripes is chamfered with a high-gloss finish.
On the other side of the graphics card, the other side of the graphics card is also hollowed, and the ultra-large-scale fin cooling module and alloy frame can be seen. High-quality die-cast metal frame, cover and backplate to tightly protect the PCB and delicately direct the air flow.
The ROG Strix RTX 4080 O16G Raptor is equipped with a high-strength dual-slot stainless steel bezel and provides 3 DP 1.4a and 2 HDMI 2.1 ports, all of which are native interfaces to facilitate multi-screen display solutions and support up to 8K resolution.
The rear grille heat dissipation design of the graphics card, the silver metal nameplate in the lower left corner is printed with the REPUBLIC OF GAMERS LOGO, and there are also two PWM FanConnect II interfaces in the upper right corner, which is convenient to connect fans and improve the overall heat dissipation performance.
Memory is Kingston Fury Renegade DDR5 RGB 6400 32GB (16Gx2).
Take out the memory body, Kingston FURY Renegade DDR5 RGB memory all-over black and silver mixed exterior design, and equipped with irregular geometric cutting pattern and outer multi-layer cutout design is very personal, thick aluminum heat dissipation vest to ensure the low temperature and stable operation of the memory.
The memory is a 32GB kit (16GB x2), a speed of 6400MT/s, a latency of CL32, and an operating voltage of 1.4V, supporting Intel & AMD dual platforms. Three XMP overclocking preset files are built into the memory for total player selection (DDR5-6400 frequency, timing 32-39-39-80 CR2; DDR5-6000 frequency with 32-38-38-80 CR2; DDR5 4800 frequency with a timing of 38-38-38-70 CR2). The Kingston Fury logo in the center of the memory vest, and the Rebel English logo below.
The word DDR5 is marked in the lower right corner of the memory.
At the top of the memory is a dynamic RGB LED strip with the word FURY printed on the top, and a large number of LED beads are built into the strip to make the memory lighting transition more natural. The memory has customizable RGB dynamic lighting effects, supports Kingston Infrared Sync Technology technology, and can bring more personalized and cool lighting performance with FURY CTRL software.
The SSD comes from the Western Digital WD_BLACK SN850X 1TB.
Open the package to see the contents of the package, including an instruction manual, a solid-state drive, and the hard disk is wrapped in a transparent plastic shell to ensure the safety of the transportation process. The Western Digital WD_BLACK SN850X 1TB is backed by an official five-year warranty.
Remove the solid body. The hard drive adopts the unique black PCB design of Western Digital Black Disk, M.2 2280 specification, NVMe PCIe Gen4 SSD, and a nameplate sticker is attached to the top to mark the specific model parameters. The drive is a 1TB version with sequential read speeds of 7300MB/s, sequential write speeds of up to 6300MB/s, random read 4K IOPS up to 800K, and random write 4K IOPS up to 1100K. WD_BLACK SN850X is optimized for gamers and adds the GAME MODE 2.0 function, which has: first, pre-loading technology, which reads data into the cache in advance through the combination of algorithms to accelerate the game loading time; The second is load balancing technology, which balances flash memory reads, erases, and writes through optimization algorithms to reduce losses and maintain durable, high-speed and stable data transmission.
Western Digital WD_BLACK SN850X adopts the 20-82-20035-B2 master developed by Western Digital, which is faster, lower power consumption and temperature, and the main control is still an external cache solution, configured with 1GB DDR4 DRAM, and the independent cache also ensures that the WD_BLACK SN850X can provide the best sustained performance. With the latest 112-layer BiCS5 flash memory particles, sequential read speeds are increased to 7300MB/s.
The hard disk adopts single-sided particles and does not have any chips on the back, which minimizes the overall thickness and can be adapted to the installation and use environment such as notebooks and PS5 with limited space.
The power supply chose the Asus ROG Thor 1000W Platinum II Raytheon 2 with a 10-year warranty.
The first is a wealth of full-module cables, the main power supply module wires are designed with black snakeskin packaging network, and the wires are soft and easy to care for.
Other cables such as large D-mount and SATA interface are designed with rubber flat wires.
This time, Raytheon 2 power supply is equipped with PCIe 5.0 specification 16Pin power supply interface power supply cable, which can support 600W ultra-high power to meet the power consumption needs of the new generation of graphics cards.
The overall dimensions of this power supply are 190mm x 150mm x 86 mm, the custom aluminum-laminated brushed upper cover is invincible, and the built-in 13.5cm double ball bearing axial fan adopts a frame design, which also brings more air volume and pressure. This power supply adopts the Haiyun solution, rated 1000W power, platinum full module design, is a single 12V output design, ROG Raytheon 2 power supply has passed 80 PLUS Platinum certification and Cybenetics Lambda A++ noise level certification (noise < 20dB), as well as a custom heatsink and Axial-Tech fan, and its PWM intelligent speed control has quiet acoustic characteristics. The power supply can withstand fanless heat dissipation with a 500W load, and the fan runs at 12%-15% speed under a 700W load.
On the power supply side, the special screen display function of ASUS Raytheon 2nd generation power supply, mirror plaque design, built-in OLED display, and loading animation when booting, can display load wattage, voltage and other information in real time. The right ROG logo and twill are ARGB design, and the motherboard (5V RGB interface) is connected to a separate signal line to support ARGB light effect customization and AURA divine light synchronous control.
The other side of the power supply is designed symmetrically, the upper left corner is marked with the power supply model and wattage, and the lower right corner is the ROG loser eye logo.
The interface is very luxurious, providing 1 24Pin main power supply interface, 1 12Pin PCIe power supply interface, 2 4+4Pin CPU power supply interfaces, 1 12Pin PCIe power supply interface, 8 6+2Pin PCIe power supply interfaces, 12 SATA power supply interfaces, 6 D type 4Pin power supply interfaces.
The rear of the power supply is hollowed-out ventilation and heat dissipation design, the middle 0dB Fan button is the fan start-stop technology mode when it pops up (ON), which can completely stop the fan at less than 50% load, the power connector on the right, and the ROG logo nameplate below.
The Asus Gamer Homeland ASUS ROG RYUJIN III 360 Ryujin III used in the radiator is integrated water-cooled heat dissipation without light performance version + three magnetic ARGB fans.
Unboxing is a beautiful RO Ji card.
Accessories include 1 faith sticker, 1 instruction manual, 1 fan wire and clip kit (Intel LGA1700/1200/115x and AMD AM5/AM4).
The ROG RYUJIN 360 Integrated Water Cooling Radiator provides an industrial-grade Noctua iPPC F12-2000 PWM exhaust fan for high performance and low-noise operation.
Fan speed: 2000RPM, H2O Wind pressure: 3.94mmH2O, air volume: 71.6cfm, fan noise: 29.7dB(A). Lightless design.
Take out the integrated water-cooled body. All blackened design, the weight is still quite heavy, black nylon braided water pipe, the joint wrapping material is rubber. This radiator features an 8th generation Asetek pump with higher flow, lower noise, enhanced heat dissipation, a large pure copper base plate, and pre-coated silicone grease.
Fully blackened 360 aluminum refrigeration radiator. Dimensions: 399.5mm x 120mm x 30mm radiator, 3mm thicker than the previous generation for enhanced heat dissipation. Both sides of the factory radiator are covered with plastic protective covers to prevent fin bumps.
The number of waterways is 12, and the fin density is high.
The middle of the side of the cold row is inscribed with the twill font ROG Logo.
Cold exhaust inlet and outlet pipe rubber sleeve fixed protection.
Comes with a Velcro printed with a ROG motif that acts as a water management thread. Rubber sleeve reinforced by woven mesh with inner diameter expanded from 5mm to 7mm to reduce flow resistance
The cold head adopts a cubic design style, size: 89 x 91 x 101mm, the surface material is aluminum alloy material, black anodized with rounded corners on the edges, and the slogan ROG is printed on a circle of borders around the cold head. The water block is equipped with a 3.5-inch LCD display with a resolution of 320 x 240, 32MB of storage space is twice that of the previous generation, and the screen frame rate has been upgraded to 60 frames from the previous generation. PLAYERS CAN CUSTOMIZE THE WATER-COOLED DISPLAY THROUGH ASUS' OFFICIAL ARMOURY CRATE SOFTWARE, SUCH AS CUSTOM ANIMATION/WALLPAPER, ROTATING THE DISPLAY SCREEN, ETC., AND CAN ALSO MONITOR THE FREQUENCY, VOLTAGE, TEMPERATURE, FAN SPEED AND WATER FLOW IN REAL TIME.
The huge ROG logo can be seen on the left side of the cold head. The upper part is made of twill grille air intake, which is convenient for the built-in fan to draw cold air to cool the motherboard VRM, and the lower part is the air outlet.
The design on the right side of the cold head is the same as the left side, and the huge ROG English logo can be seen. The upper part is made of twill grille air intake, which is convenient for the built-in fan to suck such as the cold air cooling head, and the lower part is the air outlet.
The water block inlet and outlet pipes can be rotated with the installation method of the cold head.
The top cover of the upper display screen is a magnetic design, using magnetic design, and it can be automatically magnetically fixed when it is installed back in line with the metal contact and put down. Take it down to see its cold head embedded fan, and the embedded VRM fan can also help the heat dissipation of the whole motherboard. The large embedded axial fan helps improve airflow, reducing the motherboard VRM temperature by up to approximately 35°C.
Embedded VRM water pump fan. The built-in 8th generation Asetek water pump features a three-phase motor that provides higher flow and lower noise, enhanced heat dissipation performance, and a larger size base to provide higher thermal efficiency for the next generation of Intel and AMD processors.
Inside the top cover, the screen back cable, quick plug, and magnetic contacts.
The thick pure copper heat dissipation base expands the thermal contact area by about 32%, which efficiently dissipates heat from the power-hungry processor. Pre-coated with thermal grease, the square coating also fits better the square appearance of the heat sink.
Added 3 ROG 120mm magnetic daisy-chain ARGB fans. Fan speed: 2200RPM, fan noise: 36.45dB(A), wind pressure: 3.88mmH2O, air volume: 70.07cfm, support ARGB motherboard Shenguang synchronization.
Fan side ROG Loser Eye logo stripe trim.
One side of the fan is a concave metal contact, and this side is a magnetic side.
The convex metal contact on the other side of the fan, this side is also a magnetic surface, the two sides are connected to suck tightly without loosening, and so on, easily completing the daisy chain interconnection of multiple fans.
The custom ARGB exhaust fan seamlessly connects to the magnetic connector to connect the fan and transmit control signals and power. Three fans require only one cable, making installation and cable management easy.
The chassis fan chose the Limin Thermalright TL-B14B Extrem.
The appearance is black throughout, turbine fan blades, cushioning rubber at all corners, and the dynamic balance dispensing 2.0 process is adopted to achieve XYZ three-dimensional dynamic balance correction. The frame is triangular symmetrical, increasing the effective air outlet area by 23% and increasing the compressive strength of the structure by 20%.
Made of PBT server-grade materials, equipped with Minebea double ball bearings, high life of 100,000 hours of trouble-free operation, 6 years warranty. Core specifications, all 4PIN PWM adjustable speed interface, B14B Extrem speed 2000RPM, air volume 110.4CFM, wind pressure 3.02mm / H2O.