In the first two issues, we have a certain understanding of the evolution of Li Ning Wade 808 III. generation, the pertinence is very direct, and the performance improvement is obvious. In this issue, we will talk about the design differences between the 808 III. ULTRA and 808 III. generation ULTRA and 808 III. generation.
Li Ning Wade 808 III generation ULTRA love
ABAT051-7
Q3 2023
¥999RMB
Li Ning Wade 808 III generation Love
ABPT043-12
Q3 2023
¥699RMB
III. ULTRA (left) shoe box front 808 and water ripple
The Wade logo on the front of the third-generation (right) shoe box
Comparison of the side labels of the III. generation ULTRA (above) and the third generation (below) shoebox
Frontal comparison of the III ULTRA (left) and III (right).
The third-generation ULTRA (left) rigid mesh upper, with a thicker hot melt material at the toe
Generation III (right) lightweight mesh upper with hot melt coating
The third-generation ULTRA (left) lace hole is made of a combination of hot melt coating and composite fiber cord with flat laces
The third-generation (right) lace holes are made of hot melt coating punched holes with round laces
The III. generation ULTRA (left) is followed by an independent friction strip
Generation III (right) fabric lining
Comparison of the light transmittance of the upper of the III. generation ULTRA (left) and the third generation (right) loving-love color matching
Comparison of the outside of the III generation ULTRA (left) and the third generation (right).
Comparison of the inside of the III. generation ULTRA (left) and the third generation (right).
The third-generation ULTRA (left) is wrapped in a large area of upturned TPU on the heel, and a carbon fiber sheet is added on the outside
The third generation (pictured right) heel flips outsole + lateral TPU stabilizer, wrapped in leather
Comparison of the heel of the III generation ULTRA (left) and the third generation (right).
III. generation ULTRA (left) water ripple bottom flower, front and rear palm lines are denser, carbon fiber stabilized at the arch of the foot
The third generation (right) water ripple bottom flower, the forefoot stress point adopts a variant "W" pattern, and the foot arch is made of rubber and plastic stabilizer
The TPU position on the outside of the forefoot of the third generation ULTRA (left) is moved down, and stiffeners are added laterally, and the stabilization effect is excellent
The TPU on the outside of the forefoot of the third generation (right) is turned up to improve the lateral strength
The 3rd generation ULTRA (pictured above) 421/3 yards has a forepalm width of about 113.06 mm
Generation III (below) 421/3 yards forepalm width about 109.98 mm
The 3rd generation ULTRA (pictured above) has a palm width of about 88.16 mm after 421/3 yards
Generation III (below) 421/3 yards rear palm width about 90.23 mm
The third-generation ULTRA (pictured left) is embedded with a full palm flick midsole
The third generation (right) embedded full-palm Li Ningyun PLUS midsole
The force points on both sides of the forefoot of the third-generation ULTRA (pictured left) are not grooved
The third generation (right) has grooves on both sides of the forefoot
The third-generation ULTRA (left) adds TPU sheets to extend to the arch of the foot to strengthen torsion resistance and improve force conduction
The third generation (right) forefoot position added 䨻 flick material, arch TPU stabilizer
The 3rd generation ULTRA (pictured left) weighs about 62.7 grams in the 421/3 yards
The 3rd generation (right) weighs about 79.2 grams in 421/3 yards
The 3rd generation ULTRA (left) is about 270 mm long in the midsole of the 421/3 yards
The 3rd generation (right) 421/3 yards is about 270 mm long
The 3rd generation ULTRA (pictured above) 421/3 yard midsole forefoot width is about 97.05 mm
The 3rd generation (below) 421/3 yard midsole forefoot is about 95.52 mm wide
The 3rd generation ULTRA (pictured above) 421/3 yard midsole palm width is about 70.82 mm
The 3rd generation (below) 421/3 yard midsole palm width is about 91.19 mm
The 808 III. ULTRA, 421/3 yards flick midsole is about 11.22 mm thick in the forefoot position, 19.49 mm thick in the rear foot position, and about 8.27 mm in drop
The 808 III., 421/3 yard Li Ningyun PLUS midsole is about 11.76 mm thick in the forefoot position, about 20.15 mm thick in the rear palm position, and the drop is about 8.39 mm
The middle backing of the III. generation ULTRA (pictured left) uses supercritical material
The middle backing fabric of the third generation (pictured right) uses EVA material
The size 3 ultra (left) size 421/3 single shoe weighs about 407.6 grams
The size 3 (right) size 421/3 single shoe weighs about 399.4 grams
808 III generation ULTRA loving
808 III generation ULTRA oxygen
808 III. ULTRA Chemical Reaction
808 III. ULTRA night light
Summary
Li Ning Wade 808 III. ULTRA, the ultimate streamlined appearance, low center of gravity, is a good choice for speed players on the court.
Xiaobian tried on Li Ning Wade 808 III. generation ULTRA, the semi-inner boot design is stress-free to put on and take off, and the lace hole of the composite fiber rope is slightly laborious to adjust, but the fit after fastening has been significantly improved. The upper adopts a high-strength mesh combined with a lamination process, and carbon fiber cloth is added to the inside of the forefoot and the outside of the arch to improve the strength of the shoe body.
Full palm flick technology, foot feel needless to say, cushioning rebound has a good performance. The TPU stabilizer on the midsole is not affected by the normal bending of the sole, and has a very good force conduction, with the TPU stabilization device around the outside and the carbon fiber sheet on the outside of the heel, which effectively improves the overall stability.
808 III. generation ULTRA and 808 III generation two shoes, both use 1933 shoe last, and the embedded replaceable midsole can be used interchangeably, greatly improving the adaptability, daily training can choose 808 III. generation, higher strength can choose 808 III. generation ULTERA, to meet the wearing needs of most players. Xiaobian prefers the 808 III. shell with a flick midsole.
The content of this issue is here, everyone's comments, likes, and retweets are the biggest driving force to support the progress of Fast Pass Sports, and we will see you in the next issue.