recently
Yingshi Village, Huangtian Town, Pinggui District, Hezhou City
A tin shed is used for storage
A fire broke out in the storage room of auto parts and miscellaneous items
The fire caused no casualties
(Stamp can review the case)
Investigated by the fire department
The cause of the fire is:
Workers perform electric welding operations without a license
Mars accidentally splashed into the storage room and ignited debris
This caused the fire
On-site restore
Video loading...
On-site monitoring display
In the afternoon of the incident
Workers perform electric welding work outside the storage room
From time to time, Mars splashes into the storage room
Around 15:22 on the same day (standard Beijing time)
(On-site monitoring time is 23 minutes faster than standard Beijing time)
An open flame began to emerge from the corner of the storage
The fire gradually expanded
It is accompanied by a little smoke
At this time, the construction personnel did not find any abnormalities
Electric welding operations are still in progress
Within the next three minutes
The fire spread rapidly
It has been burned to the ceiling
The storage room was filled with smoke
At this time
On-site workers also spotted the fire
Dialed the police
Fortunately, the fire disposal was timely
The fire caused no casualties
During electric welding operations
The solder joint temperature can usually reach 3600-6000°C
Welding spatter everywhere
It is easy to ignite combustibles
It is very easy to cause fire
When performing hot work
Unlicensed welding, failure to approve hot work,
Welding is not carried out in accordance with regulations, etc
These actions
It's all explicitly forbidden!
Carry out hot work
Operators must hold a certificate to work
Start the fire according to the operating procedures
Keep away from flammable and explosive materials during operation
Do not work in high-risk locations
↓↓↓↓↓↓
- END -