It's fun to think creatively, develop your brain, and get your hands dirty

Writing articles is not to show off, but to feel that the hands are very interesting, unconsciously feel a little excitement and sense of accomplishment... To be honest, the world is very wonderful, there is no useless waste, only people who do not understand, will not use, really, do not know how to suddenly have this kind of enlightenment, because the amount of knowledge is too small, so can not be listed one by one, if someone reads this, can you point out what is useless, there are things outside the things, there are people outside the people, there are mountains outside the mountain, a mountain is still higher than a mountain, you feel waste, that is because you do not have a unique vision, vision, ability, to contact, to accept things that you can't do, don't know, you can ignorantly deny everything... Say more, or come back to say the right thing, others say spelling Xixi, pit, but I am a loyal user of spelling, I don't know I have bought a lot of things, but I have won the title of local tycoon, bought so many things, I only feel that there are two or three things are not satisfied, the others are leveraged, I use the good feeling, there is more variety, the price is also close to the people, the quality is also strong enough, here I want to explain that I buy less fruit, buy are other miscellaneous things... Speaking of this, it is necessary to say that buying things, in fact, to put it bluntly, is to look around a few, look at the goods, look at the price, look at the service, look at the reviews, the introduction of the goods, and finally my intention to buy is to take the middle, not expensive, not cheap can be used. In fact, buying things is also hands-on, brain,spelling feelings, feeling,feeling what's good, feeling not arriving, picking and choosing, engaging in headaches, to be honest sometimes a few pieces, more than a dozen pieces of things sellers also send, and the delivery location away from me are hundreds of thousands of kilometers, I really don't know the rules of his operation, but from my mind to say a few dollars of things, I really don't know how to send, may not be mailed... This is where I can't get rich, and I can't sell goods through existing, known channels. Power tools broken, bought a few accessories, just a few dollars, and electric lo iron, waited for three or four days, only to arrive at the goods, because there is no venue, in the place of residence on the floor and sit... Because of the last time to remove the screws, the plum blossom knife edge was worn, the result of removing the screws was removed for more than ten minutes, and what I want to say is the details, which are really exciting for me, because there are more than ten screws, there are large and small, and the removed tools I have not removed, so everything is unknown, look down, the tool pattern, determine the order of screw removal, I am not a professional, just dismantle the interesting, I am choosing to dismantle the big snail first, why should I remove the big one first, because in the case of the fixation of the small screw, the big snail is upright, the screw is easy, and the right hand palm top screw handle , the index finger and the middle finger of the snail in the middle, the thumb pressed the handle body, the left hand to hold the power tool, the screw knife ninety degrees vertical screw, force counterclockwise one-handed rotation, first easy to move, then evenly exit, watch the screw screw out, comfortable, the back of the screw according to this one by one to remove, because the screw installation is not experienced, there is no centralized and orderly installation, the back in the screw when the screw is a little situation, this is the last word... Because the screws are all screwed out, and the shell is still stuck, because of the non-professional, with a strong slap, the result of the parts like a goddess scattered flowers scattered on the ground, put me depressed want to give myself a few slaps, fortunately I have a second, this time to learn some experience, the dismantled screws one by one on the white paper, and then the tool is enlarged in the large box, and then take it flat, gently along the seam, the work is good, open is smooth, all the internal structure is clear, and then compare the inside of the second tool, put the scattered parts on the first hand, Then check where the situation is, seriously, I really did not repair this thing, just to see if the appearance has no broken marks, there are no burn marks, and later found that the pin line is broken, I did not think much, directly with a knife peeling, the wire separated, directly wrapped around the plug, and then plugged in the battery, press the switch, the light is on, there is a whining sound, is not able to turn, the rest is that I put the removed shell on, no screws, in the press, I dizzy, the switch can not move, depressed, just fine can press, now I can not press ah, so disassembled to see, The second switch, it turned out to be an anti-switch, the switch has a small buckle, the reverse can not move, adjust the switch back, install the shell, wait for the miracle to appear, the miracle did not appear, the light is on, the motor is still whining, I dizzy you... Directly throw aside, take the second one over, check the problem, oh you don't say, it's really luck to come, it's the same problem, the pin line is broken, as for the embarrassing problem that will occur if the pin is broken, the plug can be used, not dialed and not turned. Or the old method directly peeled, screwed on the plug, and then inserted the battery, open the switch, well, well, don't mention how cool the heart is, feel three volt days to eat iced watermelon, cool, cool crooked, because the feeling is directly screwed on the socket is not reliable to go to other rooms to take the electric lo iron, the merchant conscience is very good, welding wire, two milli thick, there is a meter, half of the box of rosin matchbox, half of the box of the box is packed, the rosin has a crack, I manage it, directly plug the socket, a plug of the socket, a light, a few seconds in the leaky place smoke, The heart is still wondering, it will not be bad, a look at the instructions, is a piece of wrapping paper, said the first time to use, smoke is normal, with a moment of good, heating, heating, to really look like I buy these feel very understandable, in fact, I and Ben do not know the principle, I used to repair the mobile phone, saw the repair of the mobile phone is to repair the welding wire to the Lo iron, the welding wire is glued to the electric wrench, and then every once on the rosin inserted, a plug a smoke, and then to touch the welding death... Thinking back to others is very simple, they are also so engaged, originally wanted to remove the old welding on the foot, it turned out that the old welding did not react at all, then directly welded the wire, when I put the wire on the Lo iron, the welding wire did not react, I put the Lo iron into the rosin, the incense is like jelly, there is smoke, I waited for a minute, in the welding wire to the Lo iron lean, haha, the weld wire melted, turned into a silver small water droplet, don't mention more happy, but not happy for a while, the welding wire does not melt, still stuck to the tip of the Lo iron, I don't care so much, Directly into the water droplet-like welding hard paste on the wire, Luo iron away from the water on the fixed word, the silk does not melt, I went to dip the rosin, and then the welding wire into a big lump, look uncomfortable, and finally no way, flat Luo iron needle, a solid and then into water, haha, cool ah, when they feel satisfied, completed the welding, a waste tool from the vitality of the very ah. Pull the iron, throw it on the ground, put the screws on... Because I was too happy, I didn't look at the screw eye on the screw, I went directly to the ground once, and I didn't know why, there were two large screws that were crooked a little, and I didn't pay attention to it, and then I screwed half of it too much, and I dismantled the installation again, and this time I installed the big positioning first. In the installation of small, the result of the large installation, the small installation but found that the handle can not fit perfectly, they did not pay attention, squeeze hard, feel too much to eat, only to give up, and then look at where can not fit, only to find that there is a red line is clamped, with a flat straight insertion, into, and then a force of a press, perfect, in the screw, beautiful, a tool that can not work can work... Pack up the second one, and then take the first one to check, did not find any problems, put on it again, but still can not use, people sometimes in the rogue, powerless, when love to vent, because of the battery, I put the tool flat, in the tail gave it a few slaps, because the force is too strong, the right hand hit the left hand, because the pain instinct on the finger, the index finger pulled the switch, woo woo, actually turned up, haha, too lucky, and repaired, so I welded again, well, and installed the socket, But when installing the socket, I always feel that there is something missing, and then I found that there is less of a spring, I look left and right, looking everywhere, I am looking for crazy, I did not find, no way, no spring, no elasticity... I don't know what the head is thinking, actually remembered that there is a spring in the ballpoint pen, so I went to find a pen, opened the pen body, found that the neutral pen has no spring, I looked for a notepad, oh, actually there is, I put the pen on the installation, power tools, great, can work, because it is too small, a little unstable, can be used together. I screwed the screw again, with experience, soon screwed up, I tried with the battery again, whining, not installing, I took the battery, and on, whining, I was hot at this time, and a few slaps, I found that the shell was loose, I squeezed it hard, a press, oh, don't mention how cool this sound is, I put it, and whimper no, I feel that I found a little problem, with a screw knife with a strong screw, until there is no seam, in the switch, oh oh oh, hahaha, done, waste does not know but can be used is the king. The only unpleasant thing is that there is no original loading of all the parts, when I pack up the tools and prepare to go back to the accommodation, I feel that the pants are a little gray, I bend down to pick up the pants legs, the right foot is shaken, the left foot, suddenly a small thing fell out of the pants legs, a look, I have to explode the rough mouth, ten thousand grasshoppers ran over, I did not want to change the heart can not collapse, feel the original clothes are good... And dismantled, originally everything was good, but because the pen spring to be small, long, and so the shell opened, a pop out, dizzy, this he honey what ah, but this is a small thing, the pen spring does not use, I have a load ah. In the finale, all the efforts and efforts are worth it, and save hundreds of votes, originally I was ready to buy a new one, but a few small parts, a few tools to let the things to be scrapped, from the new has a vitality of the cool ah, and accumulate some, special feeling, when there is a next time, there is thunder at the same time, I can quickly find the problem, understand the problem... You can summarize a lot of experience, be bold and careful, do things in an orderly manner, have good habits, and have a brave heart that does not lose, repeatedly operates and summarizes... Hahaha, in fact, the video is very convenient to see what I write, writing is time-consuming, and sometimes I can't tell what I want to say. But each has its own advantages, I feel interesting, really, do a thing, get more than watch others do... It's so interesting, like the unknown, not sure, and finally harvested... Another point, the spring of the pen was found, the Black Forest