Hello everyone, I am Supercoolman, deeply engaged in home appliance shopping for many years, pay attention to me, help you quickly purchase, less detours!
In the past two years, I have evaluated many floor scrubbers, and the early floor scrubbers did have problems such as weak cleaning ability and short battery life, but with continuous iteration, most of the current brand floor scrubbers have a very good cleaning ability, the battery life has increased a lot, and they also have a certain self-cleaning ability.
Why is it "certain", because many machines self-cleaning is not perfect enough, rollers need to be manually treated after winding hair, self-cleaning rollers need to be manually dried, even if some machines increase centrifugal spin-drying, but can not completely remove moisture, there is a risk of breeding bacteria, odor. Is there no good solution?
Of course, there is, that is, the roller forward and reverse rotation and rapid hot air drying, these two technologies are the first of its kind in the floor scrubber industry, and also confirm the pursuit of very strong innovative research and development capabilities. Careful partners should know that there are many models of floor scrubbers chased, which are launched for the different needs of users, this is the brand of advice, and users have the need to develop and produce products immediately.
Recently, Chase launched the H12 Pro Plus floor scrubber, which was upgraded to 30 minutes of fast drying, which is really self-rolling. Just when my floor scrubber should be updated again, I bought a chasing H12 Pro Plus, today I will take you to see if it can really solve the worries?
Simple unboxing
Needless to say, it is worth mentioning that after the box is opened, the two sides of the protective edge have quick installation, fast storage, and quick use of the diagram, so that there is no need to read the manual, directly according to the illustration of installation, storage, use, very in line with our young people's needs for simple and efficient.
Remove all parts from the box, including body, handle, base, cleaning brush, spare roller brush, spare filter element, cleaning fluid, instruction manual.
The assembly process is very simple, just plug the handle into the fuselage, put it on the base, and finally plug in the power supply.
Structural design
The realization of functions requires a characteristic structural design, before the actual measurement, let's take a look at the structural design of the pursuit H12 Pro Plus!
1. Press the key
The whole floor scrubber has four buttons, of which, the switch button, mode switch button, self-cleaning key are designed in the handle, covering the daily control needs, can be described as simple and efficient, the handle shape and button position are very ergonomic design, the back of the fuselage is equipped with a voice setting key, you can adjust the volume and switch languages.
2. Water tank
The lower part of the fuselage is a 700ml waste water tank in front and a 900ml fresh water tank in the back, which is one of the largest among many floor scrubbers.
There is an electrolysis device inside the clean water tank, and the generated electrolyzed water can be sterilized in a full-link closed-loop sterilization. In addition, for heavy stain cleaning, you can also add an appropriate amount of cleaning liquid to the clean water tank, and the cap of the cleaning solution is a small measuring cup with a scale, which is very intentional!
The sewage tank does not do dry and wet separation treatment, in my opinion, this is not a disadvantage, but more hands-free, because dry and wet separation, dry garbage has to be manually lifted and dumped separately, which is not only time-consuming, but also easy to pollute hands. Chase this waste water tank is full, just pour it all into the toilet, it is very fast to deal with!
The sewage tank is made of silver ion bacteriostatic material, which can effectively inhibit bacteria and prevent odor, and there is no need to worry about the problem of odor and odor if the sewage is forgotten to be dumped; The bottom of the top cover is a double-electrode water level identification, and the top is equipped with a filter element to filter the exhaust air and effectively prevent secondary pollution.
3. Roller brush
The bottom of the machine is the roller, and the operation of replacing the roller brush is also very simple, just press to remove the top cover, and then press the side button, and then press the side button to eject the buckle and take out the roller.
Of course, chasing H12 Pro Plus front and back two-way self-cleaning, centrifugal spin drying + hot air drying a set, the roller brush directly returns to a clean and fluffy state, usually there is no need to disassemble and replace the roller, I only disassembled it once when I first started to observe the internal structure.
Remove the roller brush to observe the internal structure, you can see that there is a row of fine comb tooth scrapers on the inside of the roller brush, which can go deep into the root of the roller brush bristles for deep cleaning, ensure that the internal and external dirt can be cleaned in place, and also prevent hair entanglement; Above the comb scraper is a water discharge hole to ensure uniform overall humidity of the roller; There is also a silicone scraper at the bottom front of the machine to scrape off residual water stains on the ground.
Chasing H12 Pro Plus adopts chasing self-developed frequency conversion high-speed brushless motor, which is much larger than other ones, and the maximum speed reaches 98,000 revolutions per minute, which is a strong guarantee for efficient cleaning and self-cleaning.
The two sides of the roller brush also achieve zero welt, which is very practical when cleaning wall corners, narrow seams, etc., and we will actually test how it performs later.
4. Base
There is a row of hot air outlets on the inside of the front end of the floor scrubber base, which can dry the rollers with hot air, and there is a large area of air inlet on the back of the base to facilitate the rapid entry of air to form hot air.
Floor scrubbing experience
At the beginning, I also mentioned that the front and back self-cleaning and hot air drying of the H12 Pro Plus are very distinctive, this time we will change the usual suction, drag, washing and drying process, first look at the effect of self-cleaning and drying!
1. Self-cleaning
The self-cleaning operation of the H12 Pro Plus is simple, just press the self-cleaning button on the top of the handle, and the machine will take care of the rest.
The machine will first prepare electrolyzed water, and the prepared electrolyzed water will be sterilized in the whole link of pipelines, rollers and waste water tanks, and the whole process is visible to the naked eye, plus the silver ion bacteriostatic material waste water tank, which makes people double at ease!
I glued a piece of tape on the side of the roller, and I could see that the roller brush would rotate in both directions during the self-cleaning process, with a fine comb scraper, just like the front and back scrubbing process of a washing machine, which not only cleaned more thoroughly, but also removed tangled hair, achieving the effect of manual maintenance.
2. Hot air drying
In the second half of the cleaning process, the rollers rotate at high speed for centrifugal spin-drying, removing most of the water from the rollers, and then automatically entering hot air drying mode. At this time, the roller brush begins to rotate slowly, and hot air is blown out of the air outlet in front of the roller brush, drying the roller evenly.
Using the thermal imager, it can be seen that the temperature of the air outlet in front of the base roller reaches about 41 °C, and the temperature of the roller surface can also reach about 36 °C.
After 30 minutes, the hot air drying is over, and you can see that the paper towel is not stained with a little moisture, indicating that the hot air drying is not only fast, but also very thorough.
Here's a comparison of the roller state before and after cleaning and after hot air drying:
It can be seen that the self-cleaning roller stains are cleaned, the bristles are firm, and the surface leaves a strip of comb teeth marks; After hot air drying, the bristles of the rollerbrush unfold naturally and return to a dry and fluffy state. It can be seen that the pursuit of extremely fast drying has indeed brought innovation to the floor scrubber industry!
With an example, you can better understand: a floor scrubber without high-speed spin-off is like a single-barrel washing machine, and after washing, you need to wring out the water to dry; A floor scrubber with high-speed spin-off is like a double-barrel semi-automatic washing machine, although it can shake off most of the moisture, but still needs to dry; The floor scrubber with high-speed spin drying + hot air drying is like a washing and drying machine, and after washing and drying is the initial clean and fluffy state. Therefore, high-speed spin drying + hot air drying is the development trend, and it must be the standard for floor scrubbers in the future!
In addition, in the process of self-cleaning and hot air drying, the H12 Pro Plus will not only remind the user by voice broadcast, but also display real-time progress on the LED display to facilitate users to understand the working status.
3. Clean mode
The H12 Pro Plus supports three common modes: automatic, sterilization and water absorption, and can be switched using the switch button on the handle. For everyday home grounds, I would choose the automatic mode; In heavily soiled areas such as cleaning floor mats, I will choose the sterilization mode; In the bathroom where liquid is accidentally spilled or there are many water stains, I will choose the absorbent mode.
4. Regular cleaning
I have laid ketchup, cookie crumbs, vinegar, rice grains, vegetable soup, flour and other common dry and wet waste on the ground, let's see if we can clean them all in one step?
It can be seen that the dry and wet garbage after chasing H12 Pro Plus has been sucked and dragged clean, which shows that the cleaning ability of chasing H12 Pro Plus is quite good.
When there is a liquid stain on the ground, it can also be quickly adjusted to the absorption mode, and all of them are sucked away in one push and pull, leaving no stains on the ground.
5. Welt cleaning
The welt cleaning ability of the floor scrubber is very important, and good welt cleaning can avoid manual secondary cleaning by the user, greatly improving the cleaning efficiency. I sprinkle evenly on the edge of the wall to test the cleaning ability of the H12 Pro Plus welts?
It can be seen that the pursuit of H12 Pro Plus pushes and pulls, the flour on the ground is all clean, and there is no residue in the corner position, which shows that the structural design of the roller brush with zero veneer is indeed very practical.
Let's use it to clean both sides of the restaurant sideboard:
At this time, the advantages of the double veneer structure of the roller brush are highlighted, and after the floor scrubber cleans one side, it can directly turn its head to clean the other side. If it is a single-edge structure, it is difficult to clean the short side side.
6. Feeling of control
The handling feeling of the floor scrubber is also very important, if the machine is too heavy, it will greatly affect the use experience. The H12 Pro Plus weighs less than 5kg and supports self-drive traction, making it very light for daily use.
I can easily "drive" the machine back and forth and turn clean with only my little finger hooking the handle, which shows that its self-drive traction strength is just right, and there will be no problem of pushing and pulling too small or dragging the user too large.
Write at the end
After a period of use, Chase H12 Pro Plus does give me a lot of surprises, 30 minutes of rapid hot air drying, electrolyzed water + silver ion dual-effect sterilization, double zero welt roller, front and back two-way self-cleaning + toothed scraper and other functions reflect that Chase is a brand that seriously solves the needs of users, of course, this is inseparable from its strong innovative research and development capabilities, otherwise it is impossible to turn the demand into reality! Its price of less than 3K yuan is also more acceptable to most families, which is really great value for money! If you are also troubled by the pain points such as the winding of the brush of the floor scrubber and the absence of hot air drying, you can consider changing to a floor scrubber that supports forward and reverse two-way rotation + extremely fast hot air drying!