Moyou who have seen my previous video article should know that I dealt with the arduous process of tail box abnormal sound, the last time I thought that the perfect solution was to adjust the position of the lock, but after using it for a few days, there was still a different sound, and then look at everyone's message, some friends said that his solution was to buy an EVA sponge strip, and then immediately place an order!
The sponge strip bought is 1 cm wide and 3 mm thick, in fact, the gap filled in the tail box only needs about 0.5 mm, but this is only this, if you can measure the specific width of the gap in the tail box lid, and then you can find the right sponge strip is the best!
The process of sticking is relatively simple, the fingers can stuff the rubber strip into the gap, and tear the adhesive while plugging, just like applying the film to the mobile phone. After gluing, try to see if you can buckle the box, if you can't buckle it, you need to adjust the position of the lock.
Finally tried it, no vibration, no abnormal noise. Hopefully this is the last time... What methods did everyone use to solve this problem? Did the guys also find anything common to this car?
