In the past, the coach always said that when pulling down the spinning ball, the plate shape should be lit up, otherwise it is easy to get off the net; pulling the spinning ball, the plate shape must be pressed down, otherwise it is easy to go out of bounds.
With the ball changed, the speed of table tennis technology update iteration is faster, this sentence is still applicable to the present?
Guoqiu Huijun believes that it is no longer applicable.
If you think about it, the mass of the big ball has increased now, the rotation is not as strong as before, and most importantly, the arc of the ball has also become higher.
When pulling down the spinning ball, if the racket surface is still lit up and rubbed from the bottom up, it is easy to pull the ball through the net because the forward force is not enough.
Similarly, when pulling the spinning ball, the arc of the upper spinning ball jump is higher than before, if the plate shape is too pressed, it is easy to hit the edge of the board!
So, how do you pull the ball now?
Pull down the spin:
When encountering a relatively rotating downward spiral ball, the height of the first lead shot is lower than that of the incoming ball, and the forearm is quickly closed when touching the ball, and there is an obvious acceleration action, accelerating the friction ball, relying on this to create an arc, rather than a pressure plate shape.
Pull up the spin:
The same is true for pulling up the spinning ball, because the arc of the ball is generally high now, so the height of the lead shot should also be high.
As high as the ball is, the clapper will take as high as it is, and then wave forward. Don't deliberately press the plate shape, so that it is easy to hit the edge of the board!
Finally, we must pay attention to a problem of center of gravity, pull down the spinning ball, the center of gravity must be put down with the clapper, and when the second board pulls the spinning ball, the center of gravity must come up, so that it can also be taken up with the leading clap hand, if the center of gravity of the pull-up rotation is still very low, the leading clapper must not be able to get it, and the return ball will be out of bounds.
Therefore, don't be too entangled in what plate shape to use to pull the ball, use a good center of gravity to play the ball, better than anything!
This article is not easy to produce, welcome to forward more!