For a long time, a lot of attention to Apple's iPhone series products has focused on the design. Before the arrival of each new generation of iPhone series, there will be relevant design speculation on the Network.
For this year's new iPhone 14 series, there have been breaking news as early as the arrival of the currently available iPhone 13, and it is mentioned that it will bring about significant changes in appearance.
As the release of the new machine is getting closer and closer, the design revelations about the new iPhone 14 series have gradually become consistent. As far as the existing news is concerned, several leaks point to a combination of small circular punches and "pill-shaped" punches.
Now, there is also new news about the exterior design of the new iPhone 14, and shows the more detailed product body dimensions.
It is reported that the latest revelation comes from the blogger @bean sprouts, the blogger showed a detailed size picture of a suspected iPhone 14 Pro in a leak today.
This leak does not definitely point out the model information in the picture, but combined with the details displayed in it, it is roughly close to the previous iPhone 14 Pro renderings.
According to the data shown in the picture, the body width of this device is 71.45 mm, the height is 147.46 mm, and the thickness is 7.85 mm. The iPhone 13 Pro currently on sale measures 71.5 mm in width, 146.7 mm in height and 7.65 mm in thickness.
Compared with the official data of the iPhone 14 Pro body size and the iPhone 13 Pro, the iPhone 14 Pro's fuselage is longer and taller, the thickness has also increased by 0.2 mm, and the width data is relatively close.
At the same time, this set of pictures also shows the front screen design of the new machine. In terms of the size ratio shown in the picture, although the new iPhone 14 Pro adopts a punched screen design, the punched size in the center of the screen seems to be larger than that shown in the previous renderings.
According to previous speculation, these two holes will be used to house the Face ID recognition component in addition to the selfie lens assembly, which seems to be one of the reasons why its size cannot be reduced.
However, as far as the existing news is concerned, it seems that such a punched combination design will not be carried in the entire series of the iPhone 14 series, but only on the higher positioning of the iPhone 14 Pro series models.
At the same time, Apple may also bring other specifications to better distinguish the positioning of the four models of the iPhone flagship series. As for the actual situation, there should be more news in the future.