At the end of February this year, Nubia officially released the Nubia Z40 Pro flagship mobile phone, and now ZTE, as the main brand, has also completed the approval of the flagship new machine, and the image configuration of the new machine is basically the same as that of the Nubia Z40 Pro, but some differences are made in some configurations.
The product code name of this ZTE flagship new machine is A2023H, which should be ZTE Axon 40 series products, the mobile phone is equipped with Snapdragon 8 Gen 1 processor, the front is a 6.67-inch size OLED screen, the resolution is 2400 * 1080, support 10bit color depth display, and the front camera is 44 million pixels. The thickness of the fuselage is 8.46mm, and it weighs 199g.
As can be seen from the back of the network photo, the camera module design is basically the same as the Nubia Z40 Pro, the rear three cameras are the main camera of 64 million pixels and the ultra-wide angle secondary camera of 50 million pixels and the 8 million pixel periscope telephoto, the main camera should be the customized version of the 35mm focal length equivalent sony IMX787.
However, this phone still has some configurations that are different from the Z40 Pro, the phone has a built-in 4900mAh battery, the charging power is 55W, which is slower than the Z40 Pro's 80W, and the phone provides a version of the highest 1TB capacity, the phone may be released in April, then you can see how the difference between it and the Z40 Pro is.