Follow | Top
The fresh play content you bring every day will never make you regret it
Model Maker | YU-SUKE‘S FACTORY
Kit | MG 1/100 Noh Angel Gundam, MG 1/100 True Warrior Stubborn
tag | Model transformation, 3D printing, painting, creativity, masterpiece appreciation
Seeing such a true martial artist stubbornly believe that many people will feel a little surprised, a little surprised. YU-SUKE this time this work is for the little nephew to do, parents said very satisfied, the simplification of surface details are deliberate, in addition to the shoulder armor and other small amount of armor on the body is used by the real real martial artist stubborn too no parts, many other armor is actually transformed and 3D designed and printed out, which created the final shape of the body.
Let's take a look at yu-SUKE's body modification record this time.
First of all, starting from the connector of the waist, the waist is changed in order to prevent the interference of parts, and the width is increased here, so that the activity space of the skirt armor is larger,
The front skirt nail is a part printed by 3D modeling, and the connecting parts at the crotch position are also adapted.
The parts of the side skirt armor are taken from this weapon pack
The middle is embedded with the adhesive board for detailed modification.
The parts of the rear skirt armor are also 3D printed parts
Below is the multi-layered mask separation effect for this section.
The armor of the foot is used for this part, but it is obvious that the details on the parts are much more than the finished product, and it is not in line with the style of the Warring States, so YU-SUKE simplifies the appearance details of this part of the foot, fills in some of the details on the surface of the parts, and also uses the shape of the patchwork adapted to the soil on the inside.
Leg parts engraved detail added.
There is also a solid fixation on the sole of the foot, and it is completely fixed when it is placed on the pendulum.
Preliminary shape of the upper body, large antenna added to the head.
The place where the angel can be on the back of the head has added parts of the Sengoku armor shape.
Behind the "hair"...
The armor on both sides of the chest is also a part of the 3D modeling print.
The connecting parts of the backpack section are also 3D printed.
The shoulders are made of the outer armor of the true warrior, but the inner structure is still self-designed, and the main exposed spouts are here.
The outermost three companies of armor also used 3D modeling to print parts.
Cover painting of shoulder armor
Finally, let's look at a wave of close-up details of the finished painted product after the final completion