Double into the nameless heretic, symmetrical version of the transformation, production sharing
Follow | Top
The fresh play content you bring every day will never make you regret it
Model Maker | ZiPeng
Kit | HG 1/144 Unnamed heresy
tag | Model modification, painting, submission
Another inventory, symmetrical version of the nameless heresy premise is to enter double portions first. The first feeling after finishing is loose, all kinds of loose, and I don't want to move it when I'm done. There are more flaws, and the photos are more slag, and everyone will look at it
Let's take a picture of the whole before the ashes
Come on, put on the cape pendant
Backpack part
The sternum of the HG iron blood is used to straighten out, plus the scrap parts of the original nameless heresy kit, which should be the arm part, cut and bonded to make a middle jet.
Then punch a pile to shake a runner into it, make a connection, and you can insert it into the back.
The original link hole on the skeleton was left too obstructive, and the runner walked up.
Give him a knife, then cut it into small pieces and fill it in.
Both sides of the backpack are also kept, and the connection is too ugly. Make a pendant to fill in, which is not sticky, so that the back hanging cape can replace the equipment backpack.
Find two scrap pieces to cut the spherical joints out of the copper rod, pile, glue.
Shoulder pendant
Due to the change of shoulders. The original cloak link method is no longer available, and it needs to be changed to a wave.
Scrap up, put the original, extra legs, skeleton, as a connector on the shoulder.
Because the original PC piece of this skeleton plug is very large, it is not suitable to directly shake the cape there. Here first thicken the sides, use the flow channel brand to cut it out into a rubber board, stick it on both sides, and then punch holes from the middle, so that you can perfectly clamp the right PC piece.
The changed link is like this. As for how to carry it to the shoulder armor, driving piles, hitting two piles is OK.
Symmetrical part of the shoulder nails
To do symmetry, you definitely need to double in. But it turns out that this shoulder armor is all left shoulder, and this symmetry is about to be changed.
Come, first use a saw pen knife to get the back outlet down, separate, and use it later. Then use the soil to replenish, polish from the new shape, and cut the original shoulder nails, spoilers, and cut them in two.
Then use the rubber board to be symmetrical with another shoulder nail, and finally because of the modification of the thing after shaping, it is not easy to handle. Directly cover it with an extra layer of adhesive board to make a new spoiler.
Arm part
Directly use the excess waste parts in the kit to get the arm, that is, the original hg red heretic, and then cut off the original leg scraps on both sides
Skirt carapace part
After double entry, I simply changed the skirt armor of the other one, because it was originally on the left, so I cut off the corner of that side, dipped in the flow channel and stirred it to pack him into shape.
After finishing the coloring, there are some preliminary appearances
The other one has not been repaired, first joined the ranks of the rotten tail, and has not yet thought about what color separation.