Slow pin Wujiang smoke and rain
Enjoy a peaceful and good time
Rain is the second of the 24 solar terms
It means that the rains begin
Experience nearly a week of rain and low temperatures
Wujiang Public Security warmly reminds all citizens
Travel on rainy days
Raise awareness of traffic safety
Obey traffic laws
Everyone should do a good job of keeping warm
For the driver
Rain is a bothersome thing
Because the windows and rearview mirrors are often covered with water droplets
Using a wiper is always not clean
It is difficult to see the traffic situation on the road
How to maintain mirror and window glass clarity on rainy days
How do I adjust the wiper to make the windshield clean?
Let me teach you a few tricks:
1
Use a special rain remover, spray on the window glass, and do it in one move!
2
First do a simple cleaning of the window to clean up the dust and impurities that can be seen on it. Then wet the soap and apply it evenly over the window glass.
After the entire glass surface is evenly applied, wait for the soap on the glass to dry out. The dried soap is powdery and easier to wipe off.
The hydrophilic part of the soap destroys the surface tension of the water droplets, which makes the rain hit the glass without forming water droplets, but instead fuses with other water droplets on the glass to form a huge film of water.
Why does the wiper always scratch clean?
Strips of water marks
Cause: The wiper blade is not in full contact with the glass or the wiper is damaged.
Measures: If there is any dirt attached to the tape, it can be cleaned with a rag and then gently rubbed with fine sandpaper. If the wiper is damaged, it needs to be replaced in time.
Misty droplets
Cause: Grease is present on the glass or wiper of the car.
Action: The driver can use a neutral cleaner to clean the grease from the glass or wiper.
3
Makes a strange noise
Causes: Wiper rubber strip wear, connecting rod mechanism aging, wiper arm spring elasticity decreased.
Measures: Check the wiper arm or wiper linkage bushing and replace the wiper with a new wiper in time.
4
The strip has cracks/hardening
Cause: Wipers are of low quality, corroded by chemicals or exceed their "useful life".
Measures: Hardened wiper strip is difficult to soften, only replace the new wiper strip.
05
Wiper jump brush
Cause: When encountering a jump brush, most of them are the angle of the wiper strip is incorrect.
Measures: You can use fish-billed tongs to clamp the wiper arm, if it is an upward scraper jump, twist the wiper arm downwards, and vice versa. If no matter how you adjust it, you can't solve it, it may be caused by the aging of the wiper blade, and you need to replace the wiper with a new one.
Wujiang public security warm tips
Driving on rainy days, safety first
Drivers should slow down
Turn on in time
Wipers, marker lights, fog lights
Maintain a safe distance
【Source: Wujiang Public Security】
Copyright belongs to the original author, a tribute to the original